SIST EN 15182-2:2007

Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16

In addition to the requirements given in EN 15182-1, this Part of this European Standard applies to hand-held combination branchpipes (nozzles) PN 16 with a maximum flow rate of 1 000 l/min at a reference pressure of 6 bar (0,6 MPa). It deals with:
   safety requirements;
   performance requirements;
   test methods;
   classification and designation;
   operating instructions;
   marking and maintenance.
This part of this European Standard applies to branchpipes as defined in Annex A of EN 15182-1

Strahlrohre für die Brandbekämpfung - Teil 2: Hohlstrahlrohre PN 16

Zusätzlich zu den in prEN 15182-1 angegebenen Anforderungen gilt der vorliegende Teil dieser Europäischen Norm für Hohlstrahlrohre (Düsen) PN 16 mit einer maximalen Durchflussmenge von 1000 l/min bei einem Referenzdruck von 6 bar (0,6MPa). Behandelt werden:
-   Sicherheitsanforderungen;
-   Anforderungen an die Funktion;
-   Prüfverfahren;
-   Klassifizierung und Bezeichnung;
-   Betriebsanleitung;
-   Kennzeichnung und Instandhaltung.

Lances a main destinées aux services d'incendie et de secours - Partie 2 : Lances mixtes a débit et jet réglables PN 16

Gasilski ročniki – 2. del. Kombinirani ročniki PN 16

General Information

• Status: Withdrawn
• Publication Date: 03-Jul-2007
• Withdrawal Date: 19-Nov-2009
• ICS: 13.220.10 - Fire-fighting
• Technical Committee: POZ - Požarna varnost
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-Nov-2009
• Due Date: 13-Dec-2009
• Completion Date: 20-Nov-2009
• Ref Project: EN 15182-2:2007 - Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16

Relations

• Consolidated By: SIST EN 15182-2:2007+A1:2010 - Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 15182-2:2007+A1:2010 - Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 15182-2:2007+A1:2010 - Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16
• Effective Date: 01-Jan-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16Lances a main destinées aux services d'incendie et de secours - Partie 2 : Lances mixtes a débit et jet réglables PN 16Strahlrohre für die Brandbekämpfung - Teil 2: Hohlstrahlrohre PN 16Ta slovenski standard je istoveten z:EN 15182-2:2007SIST EN 15182-2:2007en;fr;de13.220.10Gašenje požaraFire-fightingICS:SLOVENSKI
STANDARDSIST EN 15182-2:200701-julij-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15182-2February 2007ICS 13.220.10 English VersionHand-held branchpipes for fire service use - Part 2: Combinationbranchpipes PN 16Lances à main destinées aux services d'incendie et desecours - Partie 2 : Lances mixtes à débit et jet réglablesPN 16Strahlrohre für die Brandbekämpfung - Teil 2:Hohlstrahlrohre PN 16This European Standard was approved by CEN on 23 December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15182-2:2007: E



EN 15182-2:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Requirements.5 4.1 General.5 4.2 Mechanical characteristics.5 4.3 Hydraulic characteristics.6 4.4 Leak-tightness.9 4.5 Hydrostatic requirements.9 5 Testing and proofs.9 5.1 General.9 5.2 Jet spray angle.9 5.3 Flow and throw test.12 5.4 Tightness test.12 5.5 Hydrostatic test.12



EN 15182-2:2007 (E) 3 Foreword This European Standard (EN 15182-2:2007) has been prepared by Technical Committee CEN/TC 192 “Fire service equipment”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2007, and conflicting national standards shall be withdrawn at the latest by August 2007. EN 15182 consists of the following parts, under the general title Hand-held branchpipes for fire service use:  Part 1 : Common requirements;  Part 2 : Combination branchpipes PN 16;  Part 3 : Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16;  Part 4 : High pressure branchpipes PN 40. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 15182-2:2007 (E) 4 1 Scope In addition to the requirements given in EN 15182-1, this Part of this European Standard applies to hand-held combination branchpipes (nozzles) PN 16 with a maximum flow rate of 1 000 l/min at a reference pressure of 6 bar (0,6 MPa). It deals with:  safety requirements;  performance requirements;  test methods;  classification and designation;  operating instructions;  marking and maintenance. This part of this European Standard applies to branchpipes as defined in Annex A of EN 15182-1:2007 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15182-1:2007, Hand-held branchpipes for fire service use – Part 1: Common requirements 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15182-1:2007 and the following apply. 3.1 combination branchpipe branchpipe including a shut-off device and a variable pattern, corresponding to the following definitions
NOTE Branchpipe is defined in 3.1 of EN 15182-1:2007. 3.1.1 combination branchpipe – type 1 combination branchpipe with variable pattern at variable flow NOTE Changing pattern changes the flow. 3.1.2 combination branchpipe – type 2 combination branchpipe with variable pattern at constant flow NOTE Changing pattern does not change the flow. 3.1.3 combination branchpipe – type 3 combination branchpipe with variable pattern at selectable, constant flow NOTE Changing pattern does not change the flow.



EN 15182-2:2007 (E) 5 3.1.4 combination branchpipe – type 4 (automatic branchpipes) co
...