SIST EN 300 220-3:2001
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
General Information
- Abstract
To identify the requirepents in EN 300 220-1 which are necessary to meet the requirements of article 3.2 of the R&TTE Directive.
- Status
- Published
- Publication Date
- 30-Jun-2001
- Withdrawal Date
- 30-Jun-2001
- Technical Committee
- RES - Radio equipment and systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jul-2001
- Due Date
- 01-Jul-2001
- Completion Date
- 01-Jul-2001
- Mandate
- M/284
Overview
SIST EN 300 220-3:2001 is a harmonized European standard addressing electromagnetic compatibility (EMC) and radio spectrum matters for short range devices (SRD) operating in the 25 MHz to 1 000 MHz frequency band, with power levels up to 500 mW. Developed by SIST and aligned with ETSI EN 300 220-3 V1.1.1, this standard forms a critical part of compliance for radio equipment under Article 3.2 of the R&TTE Directive (1999/5/EC).
This document identifies the essential requirements necessary to ensure that short range radio equipment uses the allocated spectrum efficiently and avoids causing harmful interference. It specifies the technical requirements in EN 300 220-1 that are mandatory for regulatory conformity, helping manufacturers and stakeholders demonstrate compliance and market their products within the European Economic Area.
Key Topics
- Electromagnetic Compatibility for SRDs: Ensuring radio equipment minimizes electromagnetic disturbances and is immune to acceptable levels of interference.
- Radio Spectrum Efficiency: Setting criteria for spectrum use, frequency accuracy, and power output to prevent radio frequency interference amongst devices.
- Transmitter and Receiver Specifications: Defining requirements for transmitter parameters like frequency drift, output power, spurious emissions, and modulation characteristics; and receiver parameters such as blocking, selectivity, and spurious radiation.
- Compliance Testing: Stipulating measurement procedures, environmental conditions, and test sample selection based on EN 300 220-1.
- Essential Requirements of the R&TTE Directive: Focusing on Article 3.2, which relates to efficient spectrum use and the prevention of harmful interference.
Applications
SIST EN 300 220-3:2001 is relevant across a broad range of short range device applications where reliable, interference-free radio communications are essential. Typical applications include:
- Alarm and security systems (wireless sensors and actuators)
- Remote controls and keyless entry
- Wireless audio and multimedia transmission
- Industrial monitoring and control
- Telemetry for health and utility metering
- Consumer electronics operating in the 25 MHz to 1 000 MHz bands
By following the technical and test requirements outlined in this standard, manufacturers can ensure their devices meet the legal prerequisites for CE marking and free circulation within the EU and EFTA states.
Related Standards
Several standards support and complement SIST EN 300 220-3:2001, providing further guidance for design, testing, and conformity:
- EN 300 220-1: Technical characteristics and test methods for SRDs in the 25 to 1,000 MHz range (parent standard for testing requirements)
- EN 300 220-2: Supplementary parameters not intended for conformity purposes
- R&TTE Directive (1999/5/EC): European legislation on radio equipment and telecommunications
- CEPT/ERC Recommendation 70-03: Guidelines for the use of short range devices across Europe
- EN 301 489 series: EMC requirements for radio equipment
- ETSI ETR 028: Measurement uncertainties in mobile radio equipment testing
Conclusion
SIST EN 300 220-3:2001 provides a harmonized framework ensuring short range radio devices efficiently use the radio spectrum and comply with regulatory requirements under the R&TTE Directive. Adhering to this standard is essential for manufacturers seeking streamlined market access for SRDs, robust device performance, and regulatory compliance in Europe. For the latest information, always consult the referenced documents and check for updates in the Official Journal of the European Union.
Relations
- Effective Date
- 17-Nov-2009
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 220-3:2001 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive". This standard covers: To identify the requirepents in EN 300 220-1 which are necessary to meet the requirements of article 3.2 of the R&TTE Directive.
To identify the requirepents in EN 300 220-1 which are necessary to meet the requirements of article 3.2 of the R&TTE Directive.
SIST EN 300 220-3:2001 is classified under the following ICS (International Classification for Standards) categories: 33.060.20 - Receiving and transmitting equipment; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 220-3:2001 has the following relationships with other standards: It is inter standard links to SIST EN 300 220-2 V2.1.1:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 300 220-3:2001 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, 2005-01-1864; Standardization Mandates: M/284. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 220-3:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 300 220-3 Version 1.1.1SIST EN 300 220-3:2001en01-februar-2001SIST EN 300 220-3:2001SLOVENSKI
STANDARD
ETSIEN300220-3V1.1.1(2000-09)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);ShortRangeDevices(SRD);Radioequipmenttobeusedinthe25MHzto1000MHzfrequencyrangewithpowerlevelsrangingupto500mW;Part3:HarmonizedENcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirectiveSIST EN 300 220-3:2001
ETSIETSIEN300220-3V1.1.1(2000-09)2ReferenceREN/ERM-RP08-0403-3Keywordsradio,SRD,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 220-3:2001
ETSIETSIEN300220-3V1.1.1(2000-09)3ContentsIntellectualPropertyRights.5Foreword.5Introduction.61Scope.82References.83Definitions,symbolsandabbreviations.93.1Definitions.93.2Symbols.93.3Abbreviations.94Technicalrequirementsspecifications.94.1Transmitterrequirements.94.1.1Frequencyerrororfrequencydrift.94.1.2Carrierpower(conducted).94.1.3Effectiveradiatedpower.94.1.4Frequencydeviation.94.1.5Modulationdepth.104.1.6Adjacentchannelpower.104.1.7Rangeofmodulationbandwidthforwidebandequipment(>25kHz).104.1.8Spuriousemissions.104.1.9Frequencystabilityunderlow-voltageconditions.104.1.10Dutycycle.104.2Receiverrequirements.104.2.1Spuriousradiations.104.2.2Adjacentchannelselectivity-inband.104.2.3Adjacentbandselectivity.114.2.4Blockingordesensitization.115Testingforcompliancewithtechnicalrequirements.115.1Essentialradiotestsuites.115.1.1Environmentalconditionsfortesting.115.1.1.1Normalandextremetest-conditions.115.1.1.2Testpowersource.115.1.2Choiceofsamplesfortestsuites.115.1.3Transmittertestsuites.115.1.3.1Frequencyerrorordrift.115.1.3.2Carrierpower(conducted).115.1.3.3Effectiveradiatedpower.125.1.3.4Frequencydeviation.125.1.3.5Modulationdepth.125.1.3.6Adjacentchannelpower.125.1.3.7Rangeofmodulationbandwidthforwidebandequipment(>25kHz).125.1.3.8Spuriousemissions.125.1.3.9Frequencystabilityunderlow-voltageconditions.125.1.4Receivertestsuites.125.1.4.1Spuriousradiations.125.2Othertestspecifications.13SIST EN 300 220-3:2001
ETSIETSIEN300220-3V1.1.1(2000-09)46Interpretationofmeasurementresults.13AnnexA(informative):SubclausesofthepresentdocumentrelevantforadditionalessentialrequirementsofrelevantECCouncilDirectives.14A.1Compliancewith99/5/EC(R&TTEDirective)article3.3e.14A.2Compliancewith99/5/EC(R&TTEDirective)article3.3f.14History.15SIST EN 300 220-3:2001
ETSIETSIEN300220-3V1.1.1(2000-09)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeElectromagneticcompatibilityandRadiospectrumMatters(ERM).Thepresentdocumentispart3ofamulti-partdeliverable,coveringtheShortRangeDevices(SRD);Radioequipmenttobeusedinthe25MHzto1000MHzfrequencyrangewithpowerlevelsrangingupto500mW,asidentifiedbelow:Part1:"Technicalcharacteristicsandtestmethods";Part2:"Supplementaryparametersnotintendedforconformitypurposes";Part3:"HarmonizedENcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirective".ThepresentdocumenthasbeenproducedbyETSIinresponsetoamandatefromtheEuropeanCommissionissuedunderCouncilDirective98/34/EC[3]layingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.ThepresentdocumentisintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheDirective1999/5/EC[1]oftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity("theR&TTEDirective")[1].NationaltranspositiondatesDateofadoptionofthisEN:1September2000DateoflatestannouncementofthisEN(doa):31December2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):30June2001DateofwithdrawalofanyconflictingNationalStandard(dow):30June2001SIST EN 300 220-3:2001
ETSIETSIEN300220-3V1.1.1(2000-09)6IntroductionThepresentdocumentispartofasetofstandardsdesignedtofitinamodularstructuretocoverallradioandtelecommunicationsterminalequipmentundertheR&TTEDirective[1].Eachstandardisamoduleinthestructure.Themodularstructureisshowninfigure1.NewstandardforHealthforradio(ifneeded)Useofspectrum*IfneededScopedbyequipmentclassortypeScopedbyfrequencyand/orequipmenttypeDisability*Privacy*Fraud*Noharmtothenetwork*Emergency*Inter-workingviathenetwork*Inter-workingwiththenetworkNon-radioRadio(RE)Non-TTETTE3.1a/b3.23.3c3.3b3.3a3.3d3.3e3.3fRadioproductEMCProposedsinglestandardStandardsnotifiedunderEMCDirectiveStandardsnotifiedunderLVDDirective(inclacousticsafetyifneeded)Figure1:ModularstructureforthevariousstandardsusedundertheR&TTEDirectiveSIST EN 300 220-3:2001
ETSIETSIEN300220-3V1.1.1(2000-09)7ThelefthandedgeofthefigureshowsthedifferentsubclausesofArticle3oftheDirective.Theverticalboxesshowthestandardsunderarticle3.2fortheuseoftheradiospectrum.Thescopesofthesestandardsarespecifiedeitherbyfrequency(normallyinthecasewherefrequencybandsareharmonized)orbyradioequipmenttype.Forarticle3.3varioushorizontalboxesareshown.TheirdottedlinesindicatethatessentialrequirementsintheseareashavetobeadoptedbytheCommission.Ifsuchessentialrequirementsareadopted,andasfarandaslongastheyareapplicable,theywilljustifyindividualstan
...