SIST EN 13068-1:2000
(Main)Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties
Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties
The procedures given in this standard can be applied to all radioscopic systems which provide an electronic signal to a display unit or an automated image interpretation system. The radioscopic system is analysed for the response to well defined test specimen. The measurement should be performed by a sufficiently equipped and experienced laboratory. From the results, the specifications of the imaging system regarding image properties can be derived. This standard so far does not include imaging properties under moving conditions.
Zerstörungsfreie Prüfung - Radioskopische Prüfung - Teil 1: Quantitative Messung der bildgebenden Eigenschaften
Die Verfahren, die in dieser Norm beschrieben werden, können auf alle radioskopischen Systeme angewendet werden, die ein elektronisches Signal an einen Bildschirm oder an ein automatisches Bildauswertesystem übertragen. Die Antwort des radioskopischen Systems auf genau definierte Prüfkörper wird gemessen. Die Messung sollte von einem ausreichend ausgestatteten Labor ausgeführt werden. Von den Ergebnissen können Spezifikationen der bildgebenden Systeme bezüglich ihrer Bildeigenschaften abgeleitet werden. DieseNorm behandelt nicht die bildgebenden Eigenschaften bei Prüfung in Bewegung.
Essais non destructifs - Contrôle par radioscopie - Partie 1: Mesure quantitative des caractéristiques d'image
Les modes opératoires donnés dans cette norme peuvent être appliqués à tous les systèmes radioscopiques émettant un signal électronique en direction d'un dispositif de visualisation ou d'un système automatique d'interprétation de l'image. La réponse du système radioscopique à des test spécifiques bien définis est analysée. Il convient que les mesures soient effectués par un laboratoire disposant d'un matériel suffisant. On peut déduire des résultats obtenus les spécifications du dispositif d'imagerie en ce qui concerne les caractéristiques de l'image.L
Neporušitveno preskušanje - Radioskopski pregled - 1. del: Kvantitativna meritev lastnosti slike
General Information
- Status
- Published
- Publication Date
- 30-Sep-2000
- Technical Committee
- PKG - Testing of metallic materials
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Oct-2000
- Due Date
- 01-Oct-2000
- Completion Date
- 01-Oct-2000
Overview
EN 13068-1:1999 is a CEN standard for non‑destructive testing (NDT) focusing on radioscopic testing. Part 1 defines procedures for the quantitative measurement of imaging properties of radioscopic systems that provide an electronic signal to a display unit or to an automated image‑interpretation system. Measurements are carried out on well‑defined test specimens by suitably equipped and experienced laboratories to derive formal specifications of the imaging system. The standard explicitly excludes imaging properties under moving conditions.
Keywords: EN 13068-1:1999, radioscopic testing, non-destructive testing, NDT, quantitative measurement, imaging properties, radioscopy, CEN.
Key Topics
- Scope and applicability to radioscopic systems delivering an electronic output for display or automated analysis.
- Requirements for laboratory capability: measurement should be performed by a sufficiently equipped and experienced laboratory.
- Procedures for analysing a radioscopic system’s response to well‑defined test specimens.
- Methodology to convert measurement results into specifications of imaging system properties.
- Explicit exclusion: imaging under moving conditions is not covered in this part.
Note: The standard is part of the CEN suite for NDT and has been adopted nationally by member bodies (example shown as SIST EN 13068-1:2000).
Applications
EN 13068-1:1999 is practical for organisations that need to quantify and document the performance of radioscopic imaging systems, including:
- NDT laboratories performing system characterization, acceptance testing and quality assurance.
- Manufacturers of radioscopic equipment validating and specifying imaging performance.
- Facility technical managers procuring or specifying radioscopic inspection systems.
- Regulators and certification bodies requiring documented, repeatable measurement methods for imaging properties.
- R&D teams comparing system designs or evaluating upgrades to detectors, electronics, or image processing chains.
Benefits include consistent measurement practices, reproducible performance specifications, and a stronger basis for procurement, maintenance and automated image‑interpretation validation.
Related standards
- Other CEN and ISO standards covering non‑destructive testing and radiographic/radioscopic methods (users should consult the CEN and ISO catalogues for linked parts and later revisions).
- National adoptions and translations (example: SIST EN 13068-1:2000 as a Slovenian adoption).
For implementation details and the definitive list of measured imaging parameters, refer to the full EN 13068-1:1999 text and any later amendments or related parts published by CEN.
Frequently Asked Questions
SIST EN 13068-1:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties". This standard covers: The procedures given in this standard can be applied to all radioscopic systems which provide an electronic signal to a display unit or an automated image interpretation system. The radioscopic system is analysed for the response to well defined test specimen. The measurement should be performed by a sufficiently equipped and experienced laboratory. From the results, the specifications of the imaging system regarding image properties can be derived. This standard so far does not include imaging properties under moving conditions.
The procedures given in this standard can be applied to all radioscopic systems which provide an electronic signal to a display unit or an automated image interpretation system. The radioscopic system is analysed for the response to well defined test specimen. The measurement should be performed by a sufficiently equipped and experienced laboratory. From the results, the specifications of the imaging system regarding image properties can be derived. This standard so far does not include imaging properties under moving conditions.
SIST EN 13068-1:2000 is classified under the following ICS (International Classification for Standards) categories: 19.100 - Non-destructive testing. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13068-1:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13068-1:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Neporušitveno preskušanje - Radioskopski pregled - 1. del: Kvantitativna meritev lastnosti slikeZerstörungsfreie Prüfung - Radioskopische Prüfung - Teil 1: Quantitative Messung der bildgebenden EigenschaftenEssais non destructifs - Contrôle par radioscopie - Partie 1: Mesure quantitative des caractéristiques d'imageNon-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties19.100Neporušitveno preskušanjeNon-destructive testingICS:Ta slovenski standard je istoveten z:EN 13068-1
...
The standard SIST EN 13068-1:2000 outlines critical guidelines for the quantitative measurement of imaging properties in non-destructive testing using radioscopic systems. Its scope is particularly comprehensive, addressing all radioscopic systems that generate an electronic signal suitable for a display unit or an automated image interpretation system. This inclusivity ensures that the standard can be effectively applied across a wide range of industries utilizing radioscopic testing methodologies. One of the significant strengths of this standard is its emphasis on well-defined test specimens. By analyzing the response of radioscopic systems to standardized specimens, it facilitates a consistent approach to evaluating the performance and reliability of imaging systems. This structured methodology allows for clear communication of the imaging properties derived from measurements, which is pivotal for ensuring compliance with safety and quality standards in various applications, from industrial inspections to medical diagnostics. Furthermore, the requirement for measurements to be conducted by sufficiently equipped and experienced laboratories enhances the credibility of the results obtained. This not only guarantees the integrity of the testing procedures but also positions the standard as a trusted reference for professionals in the field of non-destructive testing. However, it is important to note that this standard currently does not encompass imaging properties under moving conditions, which may limit its applicability in scenarios where dynamic testing is required. Nevertheless, the foundational principles laid out in SIST EN 13068-1:2000 remain highly relevant and beneficial for organizations seeking to implement robust radioscopic testing practices. The standard serves as an essential tool for improving imaging system specifications and operational standards, reinforcing the importance of quality control in non-destructive testing environments.
SIST EN 13068-1:2000 표준은 비파괴 검사 분야에서 방사선학적 검사에 대한 양적 측정에 대한 절차를 제시하고 있습니다. 이 표준은 전자 신호를 디스플레이 장치 또는 자동 이미지 해석 시스템으로 제공하는 모든 방사선학적 시스템에 적용될 수 있으며, 이는 특히 각종 산업에서 중요한 역할을 합니다. 이 표준의 주요 강점 중 하나는 잘 정의된 시험 샘플에 대한 방사선학적 시스템의 반응을 분석할 수 있도록 하는 절차를 제공한다는 점입니다. 이로 인해 측정된 결과는 이미지 속성과 관련된 이미징 시스템의 사양을 도출하는 데 유용합니다. 따라서, 고품질 이미징 시스템을 운영하고자 하는 실험실이나 기업에 필수적인 기준이 됩니다. SIST EN 13068-1:2000은 충분히 장비를 갖춘 경험이 풍부한 연구소에서 수행되어야 하며, 이러한 요구사항은 테스트의 신뢰성과 정확성을 보장하는데 핵심적입니다. 그러나 이 표준은 이동 조건에서의 이미징 속성은 포함하지 않고 있어, 해당 분야에서의 추가적인 연구와 기준이 필요할 수 있습니다. 전반적으로, SIST EN 13068-1:2000 표준은 비파괴 검사에 있어 방사선학적 검사 방법의 표준화 및 품질 보증 측면에서 매우 중요한 문서로, 관련 분야의 전문가들에게 필수적으로 참조되어야 할 기준입니다.
SIST EN 13068-1:2000は、非破壊検査の分野におけるラジオスコピー試験の標準として、非常に重要な役割を果たしています。この標準は、電子信号をディスプレイユニットや自動画像解釈システムに提供する全てのラジオスコピーシステムに適用可能であり、その範囲は広いです。特に、明確に定義された試験標本に対するシステムの応答を分析するための手続きを提供している点が強調されます。 この標準の強みは、画像特性に関する厳密な_quantitative measurement_を実施することで、ラジオスコピーシステムの特性を客観的に評価できることです。熟練した装備を持つ実験室での測定が求められ、技術者の経験に基づいた信頼性の高いデータが得られます。この結果を基に、イメージングシステムの仕様を導出することができるため、実際の運用において非常に有用です。 ただし、この標準は移動条件下でのイメージング特性については含まれておらず、今後の発展が期待されます。移動する対象物に対するラジオスコピーの適用が求められる場面では、別の基準や手法が必要となる可能性がありますが、現段階では静的な条件下における評価に特化されています。この点を踏まえると、今後のさらなる標準化の進展が必要ですが、SIST EN 13068-1:2000はラジオスコピー試験における基礎としての重要性を持ち続けていると言えます。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...