SIST EN 13445-2:2009/A1:2012

Unfired pressure vessels - Part 2: Materials

This Part of this European Standard specifies the requirements for materials (including clad materials) for unfired pressure vessels and supports which are covered by EN 13445-1:2009 and manufactured from metallic materials; it is currently limited to steels with sufficient ductility but it is, for components operating in the creep range, also limited to sufficiently creep ductile materials . It specifies the requirements for the selection, inspection, testing and marking of metallic materials for the
fabrication of unfired pressure vessels.

Unbefeuerte Druckbehälter - Teil 2: Werkstoffe

Recipients sous pression non soumis à la flamme - Partie 2: Matériaux

Neogrevane tlačne posode - 2. del: Materiali - Dopolnilo A1

Ta del tega evropskega standarda določa zahteve za materiale (vključno z materiali za prevleke) za neogrevane tlačne posode in nosilce, ki jih zajema standard EN 13445-1:2009 in so proizvedeni iz kovinskih materialov; trenutno je omejen na jeklo ustrezne duktilnosti, za sestavne dele v razponu tečenja pa je omejen tudi na duktilne materialne z ustreznim tečenjem. Določa zahteve za izbiranje, pregled, preskušanje in označevanje kovinskih materialov za
izdelavo neogrevane tlačne posode.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 31-Mar-2011
• Publication Date: 27-Sep-2012
• Withdrawal Date: 29-Sep-2014
• ICS: 23.020.32 - Pressure vessels
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 25-Sep-2014
• Due Date: 18-Oct-2014
• Completion Date: 30-Sep-2014
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 13445-2:2009/A1:2012 - Unfired pressure vessels - Part 2: Materials

Relations

• Amends: SIST EN 13445-2:2009 - Unfired pressure vessels - Part 2: Materials
• Effective Date: 01-Oct-2012
• Replaced By: SIST EN 13445-2:2014 - Unfired pressure vessels - Part 2: Materials
• Effective Date: 01-Nov-2014
• Amends: SIST EN 13445-2:2009 - Unfired pressure vessels - Part 2: Materials
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13445-2:2009/A1:2012
01-oktober-2012
1HRJUHYDQHWODþQHSRVRGHGHO0DWHULDOL'RSROQLOR$
Unfired pressure vessels - Part 2: Materials
Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
Recipients sous pression non soumis à la flamme - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13445-2:2009/A1:2012
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-2:2009/A1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-2:2009/A1:2012

---------------------- Page: 2 ----------------------

SIST EN 13445-2:2009/A1:2012


EUROPEAN STANDARD
EN 13445-2:2009/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2012
ICS 23.020.30
English Version
Unfired pressure vessels - Part 2: Materials
Récipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
2: Matériaux
This amendment A1 modifies the European Standard EN 13445-2:2009; it was approved by CEN on 10 May 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-2:2009/A1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13445-2:2009/A1:2012
EN 13445-2:2009/A1:2012 (E)
Contents Page
Foreword .3
1 Modification 1 .4
2 Modification 2 .5
3 Modification 3 .5
4 Modification 4 .8
5 Modification 5 . 11

2

---------------------- Page: 4 ----------------------

SIST EN 13445-2:2009/A1:2012
EN 13445-2:2009/A1:2012 (E)
Foreword
This document (EN 13445-2:2009/A1:2012) has been prepared by Technical Committee CEN/TC 54 “Unfired
pressure vessels”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 13445-2:2009 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by December 2012, and conflicting
national standards shall be withdrawn at the latest by December 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 97/23/EC.
For relationship with EU Directive 97/23/EC, see informative Annex ZA, which is an integral part of this
document.
This document includes the text of the amendment itself. The corrected pages of EN 13445-2:2009 will be
published in July 2012 as issue 4 of this standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN 13445-2:2009/A1:2012
EN 13445-2:2009/A1:2012 (E)
1 Modification 1
Replace tables B.2-2 and B.2-3 in B.2.2.2 with the following revised tables:
Table B.2–2 — General requirements for prevention of brittle fracture — Reference thicknesses for
plates and strips

Plates and Strips
Max. reference
Design
No. Material
European thickness reference
as per Material group to
e
Standard Grade temperature Remarks
B
Table No. CR ISO
mm T
R
E.2-1 15608:2000
AW PWHT °C
1 P235GH 1.0345 35 200
1.1
2 P26EN 10028-5GH 1.0425 35 200
– 20
3 P292:2003 5GH 1.0481 35 110
1.2
4 P355GH 1.0473 35 70
29 P275NH 1.0487 35 200 – 20
30 P275NL1 1.0488 35 200 – 40 1.1
31 P275NL2 1.1104 35 200 – 50
EN 10028-
32 P355N 1.0562 35 70 – 20
3:2003
33 P355NH 1.0565 35 70 – 20
1.2
34 P355NL1 1.0566 35 70 – 40
35 P355NL2 1.1106 35 70 – 50
39 11MnNi5-3 1.6212 35 80 – 60
EN 10028-
40 13MnNi6-3 1.6217 35 70 – 60 9.1
4:2003
41 15NiMn6 1.6228 35 70 – 80
a)
50 P355M 1.8821 35 - – 20
a)
51 P355ML1 1.8832 35 - – 40 1.2
a)
52 P35EN 10028-5ML2 1.8833 35 - – 50
a)
53 P425:2003 0M 1.8824 35 - – 20
a)
54 P420ML1 1.8835 35 - – 40 2.1
a)
55 P420ML2 1.8828 35 - – 50
59 P355Q 1.8866 35 70 – 20
60 P35EN 10028-5QH 1.8867 35 70 – 20 1.2
61 P356:2003 5QL1 1.8868 35 70 – 40
62 P355QL2 1.8869 35 70 – 60
a)
TMCP steels shall not be Post Weld Heat Treated

4

---------------------- Page: 6 ----------------------

SIST EN 13445-2:2009/A1:2012
EN 13445-2:2009/A1:2012 (E)
Table B.2–3 — General requirements for prevention of brittle fracture — Reference thicknesses for
seamless and welded tubes

Seamless and welded tubes
Max. reference Design
No. Material
thickness
reference
as per European Material group to
Grade e temperature Remarks
B
Table Standard No. CR ISO
mm
T
R
E.2-1 15608:2000
AW PWHT °C
a)
231 P275NL1 1.0488 35 100
– 40
1.1
a)
...

SLOVENSKI STANDARD
SIST EN 13445-2:2009/oprA1:2011
01-marec-2011
1HRJUHYDQHWODþQHSRVRGHGHO0DWHULDOL'RSROQLOR$
Unfired pressure vessels - Part 2: Materials
Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
Recipients sous pression non soumis à la flamme - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13445-2:2009/prA1
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-2:2009/oprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-2:2009/oprA1:2011

---------------------- Page: 2 ----------------------

SIST EN 13445-2:2009/oprA1:2011


EUROPEAN STANDARD
DRAFT
EN 13445-2:2009
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
November 2010
ICS 23.020.30
English Version
Unfired pressure vessels - Part 2: Materials
Recipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
2: Matériaux
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 54.

This draft amendment A1, if approved, will modify the European Standard EN 13445-2:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-2:2009/prA1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13445-2:2009/oprA1:2011
EN 13445-2:2009/prA1:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN 13445-2:2009/oprA1:2011
EN 13445-2:2009/prA1:2010 (E)
Foreword
This document (EN 13445-2:2009/prA1:2010) has been prepared by Technical Committee CEN/TC 54
“Unfired pressure vessels”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document includes the text of the amendment itself. The corrected pages of EN 13445-2 will be delivered
as issue xx of the standard.
3

---------------------- Page: 5 ----------------------

SIST EN 13445-2:2009/oprA1:2011
EN 13445-2:2009/prA1:2010 (E)


Replace tables B.2-2 and B.2-3 in chapter B 2.2.2 with the following revised tables:
Table B.2–2 — General requirements for prevention of brittle fracture with reference thickness for
plates and strips

Plates and Strips
No. European Grade Material Max. reference Design Material Remarks
as per Standard No. thickness reference group to
Table e temperature CR ISO
B
D.2-1 AW PWHT T (°C) 15608:2000
R
1 P235GH 1.0345 35 200
1.1
EN
2 P265GH 1.0425 35 200
10028- – 20
3 P295GH 1.0481 35 110
2:2003 1.2
4 P355GH 1.0473 35 70
29 P275NH 1.0487 35 200 – 20
30 P275NL1 1.0488 35 200 – 40 1.1
31 P275NL2 1.1104 35 200 – 50
EN
32 P3510028- 5N 1.0562 35 70 – 20
33 P353:2003 5NH 1.0565 35 70 – 20
1.2
34 P355NL1 1.0566 35 70 – 40
35 P355NL2 1.1106 35 70 – 50
39 11MnNi5-3 1.6212 35 50 – 60
EN
40 13Mn10028- Ni6-3 1.6217 35 50 – 60 9.1
41 15Ni4:2003 Mn6 1.6228 35 50 – 80
a)
50 P355M 1.8821 35 - – 20
a)
51 P355ML1 1.8832 35 - – 40 1.2
EN a)
52 P355ML2 1.8833 35 - – 50
10028-
a)
53 P420M 1.8824 35 - – 20
5:2003
a)
54 P420ML1 1.8835 32 - – 40 2.1
a)
55 P420ML2 1.8828 32 - – 50
59 P355Q 1.8866 35 70 – 20
EN
60 P355QH 1.8867 35 70 – 20 1.2
10028-
61 P355QL1 1.8868 35 70 – 40
6:2003
62 P355QL2 1.8869 35 70 – 60 3.1
a)
TMCP steels shall not be Post Weld Heat Treated

4

---------------------- Page: 6 ----------------------

SIST EN 13445-2:2009/oprA1:2011
EN 13445-2:2009/prA1:2010 (E)
Table B.2–3 — General requirements for prevention of brittle fracture with reference thickness for
seamless and welded tubes

Seamless and welded tubes
No. European Grade Material Max. reference Design Material Remarks
as per Standard No. thickness reference group to
Table e temperature CR ISO
B
D.2-1 T (°C) 15608:2000
AW PWHT
R
a)
231 P275NL1 1.0488 35 40 – 40
1.1
a)
1.1104 – 50
232 P275NL2 35 40
EN
a)
– 20
233 P355N 1.0562 35 40
10216-
a)
1.0565
234 P355NH 35 40 – 20
3:2002
1.2
a)
1.0566
235 P355NL1 35 40 – 40
a)
P355NL2
236 1.1106 35 65 – 50
a)
248 P215NL 1.0451 10 10 – 40
a)
249 P255QL 1.0452 35 40 – 40 1.1
EN
a)
1.0453
250 P265NL 25 25 – 40
10216-
a)
26CrMo4-2 1.7219
251 15 40 – 60 5.1
4:2002
a)
11MnNi5-3 1.6212
252 35 40 – 60 9.1
a)
13MnNi6-3 1.6217
253 35 40 – 60 9.1
a)
1.0488
306 P275NL1 35 40 – 40
1.1
a)
P275NL2 1.1104
307 35 40 – 50
EN
a)
P355N 1.0562
308 35 40 – 20
10217-
a)
P355NH 1.0565
309 35 40 – 20
3:2002
1.2
a)
310 P355NL1 1.0566 35 40 – 40
a)
311 P355NL2 1.1106 35 40 – 50
a)
316 EN P215NL 1.0451 10 10 – 40 1.1
a)
10217-
317 P265NL 1.0453 16 16 – 40 1.1
4:2002
a)
321 EN P215NL 1.0451 10 10 – 40 1.1
a)
10217-
322 P26
...