SIST EN ISO 1524:2020
(Main)Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2020)
Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2020)
This document specifies a method for determining the fineness of grind of paints, inks and related
products by use of a suitable gauge, graduated in micrometres.
It is applicable to all types of liquid paints and related products, except products containing pigments in
flake form (e.g. glass flakes, micaceous iron oxides, zinc flakes).
Beschichtungsstoffe und Druckfarben - Bestimmung der Mahlfeinheit (Körnigkeit) (ISO 1524:2020)
Dieses Dokument legt ein Verfahren zum Bestimmen der Mahlfeinheit (Körnigkeit, Kornfeinheit) von pigmentierten Beschichtungsstoffen, Druckfarben und ähnlichen Produkten mit einem geeigneten Messgerät, dessen Skale eine Teilung in Mikrometern hat, fest.
Es ist auf alle Arten von flüssigen, pigmentierten Beschichtungsstoffen und ähnlichen Produkten anwendbar, außer auf Produkte, die plättchenförmige Pigmente (z. B. Glasplättchen, Eisenglimmer, Zinkplättchen) enthalten.
Peintures, vernis et encres d'imprimerie - Détermination de la finesse de broyage (ISO 1524:2020)
Le présent document spécifie une méthode pour déterminer la finesse de broyage des peintures, des encres et des produits assimilés, au moyen d'une jauge appropriée graduée en micromètres.
Il s'applique à tous les types de peintures liquides et de produits assimilés, excepté les produits contenant des pigments en forme de lamelles (par exemple des copeaux, de l'oxyde de fer micacé, des particules de zinc).
Barve, laki in tiskarske barve - Ugotavljanje finosti mletja (ISO 1524:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 1524:2020
01-september-2020
Nadomešča:
SIST EN ISO 1524:2013
Barve, laki in tiskarske barve - Ugotavljanje finosti mletja (ISO 1524:2020)
Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2020)
Beschichtungsstoffe und Druckfarben - Bestimmung der Mahlfeinheit (Körnigkeit) (ISO
1524:2020)
Peintures, vernis et encres d'imprimerie - Détermination de la finesse de broyage (ISO
1524:2020)
Ta slovenski standard je istoveten z: EN ISO 1524:2020
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 1524:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 1524:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 1524:2020
EN ISO 1524
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 1524:2013
English Version
Paints, varnishes and printing inks - Determination of
fineness of grind (ISO 1524:2020)
Peintures, vernis et encres d'imprimerie - Beschichtungsstoffe und Druckfarben - Bestimmung
Détermination de la finesse de broyage (ISO der Mahlfeinheit (Körnigkeit) (ISO 1524:2020)
1524:2020)
This European Standard was approved by CEN on 19 June 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1524:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1524:2020
EN ISO 1524:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 1524:2020
EN ISO 1524:2020 (E)
European foreword
This document (EN ISO 1524:2020) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1524:2013.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 1524:2020 has been approved by CEN as EN ISO 1524:2020 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 1524:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 1524:2020
INTERNATIONAL ISO
STANDARD 1524
Fifth edition
2020-06
Paints, varnishes and printing inks —
Determination of fineness of grind
Peintures, vernis et encres d'imprimerie — Détermination de la
finesse de broyage
Reference number
ISO 1524:2020(E)
©
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 1524:2020
ISO 1524:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 1524:2020
ISO 1524:2020(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 1
5 Sampling . 3
6 Procedure. 3
7 Expression of results . 5
8 Precision . 5
8.1 Repeatability limit, r . 5
8.2 Reproducibility limit, R . 6
9 Test report . 6
© ISO 2020 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 1524:2020
ISO 1524:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods
...
SLOVENSKI STANDARD
oSIST prEN ISO 1524:2019
01-oktober-2019
Barve, laki in tiskarske barve - Ugotavljanje finosti mletja (ISO/DIS 1524:2019)
Paints, varnishes and printing inks - Determination of fineness of grind (ISO/DIS
1524:2019)
Beschichtungsstoffe und Druckfarben - Bestimmung der Mahlfeinheit (Körnigkeit)
(ISO/DIS 1524:2019)
Peintures, vernis et encres d'imprimerie - Détermination de la finesse de broyage
(ISO/DIS 1524:2019)
Ta slovenski standard je istoveten z: prEN ISO 1524
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 1524:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 1524:2019
---------------------- Page: 2 ----------------------
oSIST prEN ISO 1524:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 1524
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2019-09-04 2019-11-27
Paints, varnishes and printing inks — Determination of
fineness of grind
Peintures, vernis et encres d'imprimerie — Détermination de la finesse de broyage
ICS: 87.040
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 1524:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
oSIST prEN ISO 1524:2019
ISO/DIS 1524:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 1524:2019
ISO/DIS 1524:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 1
5 Sampling . 3
6 Procedure. 3
7 Expression of results . 6
8 Precision . 6
8.1 Repeatability limit, r . 6
8.2 Reproducibility limit, R . 7
9 Test report . 7
© ISO 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 1524:2019
ISO/DIS 1524:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
This fifth edition cancels and replaces the fourth edition (ISO 1524:2013), which has been technically
revised. The main changes compared to the previous edition are as follows:
— The material of the gauges has been changed from hardened steel only to allow also other materials;
— Gauges with three grooves have been added;
— The description of the scraper has been modified;
— A second example of a gauge reading has been added in Figure 3;
— The text has been editorially revised and the normative references have been updated.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 1524:2019
DRAFT INTERNATIONAL STANDARD ISO/DIS 1524:2019(E)
Paints, varnishes and printing inks — Determination of
fineness of grind
1 Scope
This document specifies a method for determining the fineness of grind of paints, inks and related
products by use of a suitable gauge, graduated in micrometres.
It is applicable to all types of liquid paints and related products, except products containing pigments in
flake form (e.g. glass flakes, micaceous iron oxides, zinc flakes).
Of the three gauges referred to in 4.1, the 100 µm gauge is suitable for general use, but the 50 µm
and especially the 25 µm gaug
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.