SIST EN 3021:2017
(Main)Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification
Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification
This standard specifies the qualification and test requirements for graphite and halogen free molybdenum
disulphide dry film lubricant.
Test requirements and testing of fretting, corrosion, wear and friction properties of relevant lubricants are
not part of this standard. Refer to relevant standards in normative references.
All testing defined in this standard has to be certified by the manufacturer of the lubricant.
In order to achieve uniform coatings with defined thickness and best adhesion properties, spray application
in combination with heat curing is recommended.
Luft- und Raumfahrt - Trockenschmierstofffilme aus Molybdänsulfid-Basis, graphitfrei und halogenfrei - Technische Lieferbedingungen
Série aérospatiale - Lubrifiants á base de bisulfure de molybdène, sans graphite et sans halogène - Spécification technique
Aeronavtika - Suha maziva iz molibdenovega disulfida brez grafita in halogena - Tehnična specifikacija
Ta standard določa zahteve glede ustreznosti in preskušanja suhega maziva iz molibdenovega disulfida brez grafita in halogena.
Preskusni pogoji in preskušanje lastnosti fretiranja, korozije, obrabe in trenja ustreznih maziv niso del tega standarda. Upoštevajte ustrezne standarde v normativnih referencah.
Vse preskuse, opredeljene v tem standardu, mora potrditi proizvajalec maziva.
Za dosego enakomernih premazov z določeno debelino in najboljšimi adhezijskimi lastnostmi priporočamo nanašanje pršila v kombinaciji s toplotno obdelavo.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Trockenschmierstofffilme aus Molybdänsulfid-Basis, graphitfrei und halogenfrei - Technische LieferbedingungenSérie aérospatiale - Lubrifiants á base de bisulfure de molybdène, sans graphite et sans halogène - Spécification techniqueAerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification75.100MazivaLubricants, industrial oils and related productsICS:Ta slovenski standard je istoveten z:EN 3021:2017SIST EN 3021:2017en,fr,de01-oktober-2017SIST EN 3021:2017SLOVENSKI
STANDARD
SIST EN 3021:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3021
July
t r s y ICS
y wä s r r English Version
Aerospace series æ Molybdenum disulphide dry film lubricants graphite and halogen free æ Technical specification Série aérospatiale æ Lubrifiants á base de bisulfure de molybdèneá sans graphite et sans halogène æ Spécification technique
Luftæ und Raumfahrt æ Trockenschmierstofffilme aus MolybdänsulfidæBasisá graphitfrei und halogenfrei æ Technische Lieferbedingungen This European Standard was approved by CEN on
s y April
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u r t sã t r s y ESIST EN 3021:2017
EN 3021:2017 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions. 7 4 Composition . 7 4.1 General . 7 4.2 Type A, room temperature curing . 7 4.3 Type B, heat curing . 7 5 Curing. 8 5.1 At ambient temperature . 8 5.2 Heat curing . 8 6 Storage . 8 7 Batch release and qualification testing quality assurance. 8 7.1 Qualification tests . 8 7.2 Batch Acceptance Testing (BAT) . 8
SIST EN 3021:2017
EN 3021:2017 (E) 3 European foreword This document (EN 3021:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2018, and conflicting national standards shall be withdrawn at the latest by January 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 3021:2017
EN 3021:2017 (E) 4 Introduction
The requirements of this specification concern graphite and halogen free molybdenum disulphide dry film lubricants for fastener and other parts subjected to sliding and wear. Graphite and halogenated substances may have corrosive effects on the substrate.
SIST EN 3021:2017
EN 3021:2017 (E) 5 1 Scope This standard specifies the qualification and test requirements for graphite and halogen free molybdenum disulphide dry film lubricant. Test requirements and testing of fretting, corrosion, wear and friction properties of relevant lubricants are not part of this standard. Refer to relevant standards in normative references.
All testing defined in this standard has to be certified by the manufacturer of the lubricant. In order to achieve uniform coatings with defined thickness and best adhesion properties, spray application in combination with heat curing is recommended. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2491, Aerospace series — Molybdenum disulphide dry lubricants — Coating methods EN 2497, Aerospace series — Dry abrasive blasting of titanium and titanium alloys
EN 3026, Aerospace series — Test method for dry film lubricants — Corrosion test on steel specimens EN 3027, Aerospace series — Test method for dry film lubricants — Salt spray test EN 3030, Aerospace series — Test method for dry film lubricants — Solids content EN 3840, Aerospace series — Paints and varnishes — Technical specification EN 3847, Aerospace series — Paints and varnishes — Determination of sedimentation rating1) EN 4160, Aerospace series — Paints and varnishes — Determination of the effect of thermal exposure EN 10204, Metallic products —Types of inspection documents EN ISO 1513, Paints and varnishes — Examination and preparation of test samples (ISO 1513:2010) EN ISO 1519, Paints and varnishes — Bend test (cylindrical mandrel) (ISO 1519:2011) EN ISO 1523, Determination of flash point — Closed cup equilibrium method (ISO 1523:2002) EN ISO 1524, Paints, varnishes and printing inks — Determination of fineness of grind (ISO 1524:2013) EN ISO 2409, Paints and varnishes — Cross-cut test (ISO 2409:2013) EN ISO 2431, Paints and varnishes — Determination of flow time by use of flow cups (ISO 2431:2011) EN ISO 2808, Paints and varnishes — Determination of film thickness (ISO 2808:2007)
1) Published as ASD-STAN Prestandard at the date of publication of this standard. http://www.asd-stan.org/ SIST EN 3021:2017
EN 3021:2017 (E) 6 EN ISO 2811-1, Paints and varnishes — Determination of density — Part 1: Pyknometer method (ISO 2811-1:2011) EN ISO 2811-2, Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method (ISO 2811-2:2011) EN ISO 2811-3, Paints and varnishes — Determination of density — Part 3: Oscillation method (ISO 2811-3:2011) EN ISO 2811-4, Paints and varnishes — Determination of density — Part 4: Pressure cup method (ISO 2811-4:2011) EN ISO 2812-1, Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water (ISO 2812-1:2007) EN ISO 2812-2, Paints and varnishes — Determination of resistance to liquids — Part 2: water immersion method (ISO 2812-2:2007) EN ISO 3675, Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method (ISO 3675:1998) EN ISO 4618, Paints and varnishes — Terms and definitions (ISO 4618:2014) EN ISO 4628-2, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering (ISO 4628-2:2003) EN ISO 6270-1, Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation (ISO 6270-1:1998) EN ISO 8504-2, Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning (ISO 8504-2:2000)
EN ISO 9117-1, Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) EN ISO 9117-6, Paints and varnishes — Drying tests — Part 6: Print-free test (ISO 9117-6:2012) EN ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests (ISO 9227:2012) ISO 3270, Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing ISO 8080, Aerospace — Anodic treatment of titanium and titanium alloys — Sulfuric acid process ISO 11075, Aircraft — De-icing/anti-icing fluids — ISO type I ISO 11078, Aircraft — De-icing/anti-icing fluids — ISO types II, III and IV SIST EN 3021:2017
EN 3021:2017 (E) 7 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 dry lubricant batch dry lubricant quantity of known composition (MoS2 containing resin) prepared as one mixture using the same equipment 3.2 runs sags local irregularities in the film or coat thickness caused by the downward movement of a coating material during drying in a vertical or an inclined position Note 1 to entry: Small sags may be called runs, tears or droplets; large sags may be called curtains. [SOURCE: EN ISO 4618, definition 2.220
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.