SIST EN 14187-1:2004
(Main)Cold applied joint sealants - Part 1:Test method for the determination of rate of cure
Cold applied joint sealants - Part 1:Test method for the determination of rate of cure
This European Standard applies to the determination of the rate of cure of cold applied joint sealants indicated by the build up of the tensile modulus during the cure.
Kalt verarbeitbare Fugenmassen - Teil 1: Prüfverfahren zur Bestimmung des Aushärtungsgrades
Diese Europäische Norm gilt für die Bestimmung des Aushärtungsgrades von kalt verarbeitbaren Fugenmassen, der durch den Anstieg des Zugspannungswertes während der Aushärtung angezeigt wird.
Mastics pour joints appliqués a froid - Partie 1: Méthodes d'essai pour la détermination du taux de polymérisation
La présente Norme européenne traite de la détermination du taux de polymérisation des mastics pour joints appliqués a froid qui se traduit par l'acquisition de propriétés de résistance a la traction au cours de la polymérisation.
Hladno nanosljive tesnilne mase za stike – 1. del: Preskusna metoda za ugotavljanje stopnje strditve
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno nanosljive tesnilne mase za stike – 1. del: Preskusna metoda za ugotavljanje stopnje strditveKalt verarbeitbare Fugenmassen - Teil 1: Prüfverfahren zur Bestimmung des AushärtungsgradesMastics pour joints appliqués a froid - Partie 1: Méthodes d'essai pour la détermination du taux de polymérisationCold applied joint sealants - Part 1:Test method for the determination of rate of cure93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-1:2003SIST EN 14187-1:2004en01-junij-2004SIST EN 14187-1:2004SLOVENSKI
STANDARD
SIST EN 14187-1:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14187-1June 2003ICS 93.080.20English versionCold applied joint sealants - Part 1:Test method for thedetermination of rate of cureMastics pour joints appliqués à froid - Partie 1: Méthodesd'essai pour la détermination du taux de polymérisationKalt verarbeitbare Fugenmassen - Teil 1: Prüfverfahren zurBestimmung des AushärtungsgradesThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14187-1:2003 ESIST EN 14187-1:2004
EN 14187-1:2003 (E)2ContentspageForeword.31Scope.32Normative references.33Terms and definitions.44Principle.45Apparatus and materials.46Preparation of test specimens.47Procedure.58Calculation and expression of results.69Test report.6Bibliography.7SIST EN 14187-1:2004
EN 14187-1:2003 (E)3ForewordThis document (EN 14187-1:2003) has been prepared by Technical Committee CEN/TC 227, "Road materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by December 2003, and conflicting national standards shall be withdrawn at the latestby March 2005.This European Standard is one of a series of standards as listed below:EN 14187-1, Cold applied joint sealants — Part 1: Test method for the determination of the rate of cure.EN 14187-2, Cold applied joint sealants — Part 2: Test method for the determination of tack free time.EN 14187-3, Cold applied joint sealants — Part 3: Test method for the determination of self-levelling properties.EN 14187-4, Cold applied joint sealants — Part 4: Test method for the determination of the change in mass andvolume after immersion in test fuel.EN 14187-5, Cold applied joint sealants — Part 5: Test method for the determination of the resistance tohydrolysis.EN 14187-6, Cold applied joint sealants — Part 6: Test method for the determination of the adhesion/cohesionproperties after immersion in chemical liquids.EN 14187-7, Cold applied joint sealants — Part 7: Test method for the determination of the resistance to flame.EN 14187-8, Cold applied joint sealants — Part 8: Test method for the determination of the artificial weathering byUV-irradiation.prEN 14187-9, Cold applied joint sealants — Part 9: Function test.1)No existin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.