SIST EN 61068-1:1998
(Main)Specification for polyester fibre woven tapes -- Part 1: Definitions, designation and general requirements
Specification for polyester fibre woven tapes -- Part 1: Definitions, designation and general requirements
Specifies requirements for tapes woven on shuttleless looms for continuous filament polyester fibres. Nominal thickness of 0,13 mm and 0,25 mm and nominal widths of 15 mm, 20 mm and 25 mm are covered.
Bestimmung für gewebte Bänder aus Polyesterfilamenten -- Teil 1: Definitionen, Bezeichnung und allgemeine Anforderungen
Spécification pour rubans tissés en fibres de polyester -- Partie 1: Définitions, désignation et prescriptions générales
Donne les prescriptions pour les rubans tissés en filament continu, sur des métiers sans navettes, avec des fibres des polyester. Sont couvertes les épaisseurs nominales de 0,13 mm et 0,25 mm et les largeurs nominales de 15 mm, 20 mm et 25 mm.
Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements (IEC 61068-1:1991)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61068-1:1998
01-junij-1998
Specification for polyester fibre woven tapes - Part 1: Definitions, designation and
general requirements (IEC 61068-1:1991)
Specification for polyester fibre woven tapes -- Part 1: Definitions, designation and
general requirements
Bestimmung für gewebte Bänder aus Polyesterfilamenten -- Teil 1: Definitionen,
Bezeichnung und allgemeine Anforderungen
Spécification pour rubans tissés en fibres de polyester -- Partie 1: Définitions,
désignation et prescriptions générales
Ta slovenski standard je istoveten z: EN 61068-1:1997
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 61068-1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61068-1:1998
---------------------- Page: 2 ----------------------
SIST EN 61068-1:1998
---------------------- Page: 3 ----------------------
SIST EN 61068-1:1998
---------------------- Page: 4 ----------------------
SIST EN 61068-1:1998
NORME
CEI
INTERNATIONALE
IEC
61068-1
INTERNATIONAL
Première édition
STAN DARD
First edition
1991-05
Spécification pour
rubans tissés en fibres de
polyester
Partie 1:
Définitions, désignation et prescriptions générales
Specification for polyester fibre woven tapes
Part 1:
Definitions, designation and general requirements
© IEC 1991 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission
3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
F
PRICE CODE
International Electrotechnical Commission
IEC
Me>xayHapoimac
3r19KTpoTeXHH4eCHan HOMHCCH11
Pour prix, voir catalogue en vigueur
• • For price, see current catalogue
---------------------- Page: 5 ----------------------
SIST EN 61068-1:1998
1068-1© IEC - 3 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
SPECIFICATION FOR POLYESTER FIBRE WOVEN TAPES
Part 1: Definitions, designation and general requirements
FOREWORD
1) The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
2) They have the form of recommendations for international use and they are accepted by the National
Committees in that sense.
3) In order to promote international unification, the IEC expresses the wish that all National Committees
should adopt the text of the IEC recommendation for their national rules in so far as national conditions will
permit. Any divergence between the IEC recommendation and the corresponding national rules should, as
far as possible, be clearly indicated in the latter.
4)
The IEC has not laid down any procedure concerning marking as an indication of approval and has no
responsibility when an item of equipment is declared to comply with one of its recommendations.
This part of International Standard IEC 1068 has been prepared by Sub-Committee 15C:
Specifications, of IEC Technical Committee No. 15: Insulating materials.
The text of this part is based on the following documents:
Six Months' Rule Report on Voting
15C(CO)233
15C(CO)247
Full information on the voting for the approval of this pa
rt can be found in the Voting
Report
indicated in the above table.
---------------------- Page: 6 ----------------------
SIST EN 61068-1:1998
1068-1©IEC - 5 -
SPECIFICATION FOR POLYESTER FIBRE WOVEN TAPES
Part 1: Definitions, designation and general requirements
1 Scope
of IEC 1068 specifies requirements for tapes woven on shuttleless looms for continuous
This part
filament polyester fibres.
Nominal thicknesses of 0,13 mm to 0,25 mm and nominal widths of 15 mm, 20 mm and 25 mm are
covered. The standard combinations of nominal thickness and nominal width are specified and an
additional designation is included for tapes which, whilst complying with the majority of the
requirements of this part, are supplied with non-standard widths.
This part gives definitions, a designation and general requirements.
Other parts of IEC 1068 are:
- Pa
rt 2: Methods of test.
- Part 3: Specifications for individual materials.
2 Definitions
For the purpose of this part, the follo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.