SIST EN 50260-2-4:2002
(Main)Safety of hand-held battery-powered motor-operated tools and battery packs -- Part 2-4: Particular requirements for sanders
Safety of hand-held battery-powered motor-operated tools and battery packs -- Part 2-4: Particular requirements for sanders
Superseded by EN 60745-2-4:2003
Sicherheit für handgeführte akkubetriebene Elektrowerkzeuge und Akkublöcke -- Teil 2-4: Besondere Anforderungen für Schwing- und Bandschleifer
Sécurité des outils électroportatifs alimentés par batteries et des blocs de batteries -- Partie 2-4: Règles particulières pour les ponceuses
Varnost baterijskih ročnih orodij in baterijskih vložkov - 2-4. del: Posebne zahteve za brusilnike
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit für handgeführte akkubetriebene Elektrowerkzeuge und Akkublöcke -- Teil 2-4: Besondere Anforderungen für Schwing- und BandschleiferSécurité des outils électroportatifs alimentés par batteries et des blocs de batteries -- Partie 2-4: Règles particulières pour les ponceusesSafety of hand-held battery-powered motor-operated tools and battery packs -- Part 2-4: Particular requirements for sanders29.220.20EDWHULMHAcid secondary cells and batteries25.140.20Electric tools25.080.50Brusilni in polirni strojiGrinding and polishing machinesICS:Ta slovenski standard je istoveten z:EN 50260-2-4:2002SIST EN 50260-2-4:2002en01-september-2002SIST EN 50260-2-4:2002SLOVENSKI
STANDARD
SIST EN 50260-2-4:2002
EUROPEAN STANDARDEN 50260-2-4NORME EUROPÉENNEEUROPÄISCHE NORMMay 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 50260-2-4:2002 EICS 25.140.20English versionSafety of hand-held battery-powered motor-operated toolsand battery packsPart 2-4: Particular requirements for sandersSécurité des outils électroportatifsalimentés par batterieset des blocs de batteriesPartie 2-4: Règles particulièrespour les ponceusesSicherheit für handgeführteakkubetriebene Elektrowerkzeuge undAkkublöckeTeil 2-4: Besondere Anforderungenfür Schwing- und BandschleiferThis European Standard was approved by CENELEC on 2000-08-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.SIST EN 50260-2-4:2002
EN 50260-2-4:2002- 2 -ForewordThis European Standard has been prepared by the Technical Committee CENELEC TC 61F, Hand-held and transportable electric motor-operated tools.A first draft was submitted to the Unique Acceptance Procedure in August 1996 with positive result. Asecond draft incorporating the editorial comments received during the UAP and the modificationsnecessary to incorporate the mechanical requirements which have been agreed for hand-held toolswas submitted to the formal vote in November 1999 and was approved by CENELEC asEN 50260-2-4 on 2000-08-01.The following dates were fixed:-latest date by the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2003-03-01-latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2005-03-01This European Standard is divided into two parts:Part 1:General requirements which are common to most hand-held battery powered motor operatedtools (for the purpose of this European Standard referred to simply as tools).Part 2:Requirements for particular types of tool which either supplement or modify the requirementsgiven in Part 1 to account for the particular hazards and characteristics of these specific tools.This European Standard has been prepared under a mandate (M/083) given to CEN and CENELECby the European Commission and the European Free Trade Association and supports the essentialsafety requirements of the Machinery Directive.Compliance with the clauses of Part 1 of this European Standard together with this Part 2 providesone means of conforming with the specified essential requirements of the Directive concerned.For noise and vibration, this European Standard covers the requirements for their measurement, theprovision of information arising from these measurements and the provision of information about thepersonal protective equipment required. Specific requirements for the reduction of the risk arising fromnoise and vibration through design of the tool are not given as this reflects the current state of the art.As with any standard, technical progress will be kept under review so that any developments can betaken into account.Warning: Other requirements and other EC Directives can be applicable to the products falling withinthe scope of this European Standard.Hand-held motor-operated tools are covered by the EN 50144 series.In order to be consistent with the EN 50144 series, the same order of clauses has been kept; themissing clauses are considered void.CEN/TC 255 is producing standards for non-electric sanders and polishers (EN 792-8).This European Standard follows the overall requirements of EN 292-1 and EN 292-2.Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101.NOTE:
In this standard the following print types are used:-Requirements proper;-Test specifications;-Explanatory matter.SIST EN 50260-2-4:2002
- 3 -EN 50260-2-4:2002Contents1Scope.42Definitions.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.