SIST EN 10264-4:2003

Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire

This Part of this European Standard specifies the characteristics of stainless steel wire for the manufacture of ropes that are exposed to corrosion and in some cases to a moderate temperature.
This part of this European standard specifies the following for stainless steel wire for ropes
- dimensional tolerances;
- mechanical characteristics;
- requirements relating to the chemical composition of the stainless steel wire;
- conditions to be satisfied by any coating.

Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 4: Draht aus nichtrostendem Stahl

Dieser Teil dieser Europäischen Norm legt Anforderungen für Draht aus nichtrostendem Stahl fest, der für Seile verwendet wird, die korrosiven Einflüssen und in einigen Fällen mäßig hohen Temperaturen ausgesetzt sind.
Dieser Teil dieser Europäischen Norm legt zu folgenden Punkten Anforderungen für Seildraht aus nichtrostendem Stahl fest:
3 Maßtoleranzen
3 Mechanische Eigenschaften
3 Anforderungen an die chemische Zusammensetzung des Drahts aus nichtrostendem Stahl
3 Anforderungen an Überzüge

Fils et produits tréfilés en acier - Fils pour câbles - Partie 4: Fils tréfilés en acier inoxydable

La présente partie de la présente norme européenne définit les fils écrouis en acier inoxydables par tréfilage, pour la confection de câbles qui sont exposés a la corrosion et dans certains cas a une température modérée. La présente partie de la présente norme spécifie pour les fils tréfilés en acier inoxydable pour câbles: - les tolérances dimensionnelles; - les caractéristiques mécaniques; - les exigences concernant la composition chimique des fils en acier inoxydables; - les conditions auxquelles le revetement éventuel doit satisfaire.

Jeklena žica in žični izdelki - Jeklena žica za vrvi - 4. del: Nerjavna jeklena žica

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2003
• Withdrawal Date: 18-Jan-2012
• ICS: 77.140.20 - Stainless steels
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 19-Jan-2012
• Due Date: 11-Feb-2012
• Completion Date: 19-Jan-2012
• Ref Project: EN 10264-4:2002 - Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire

Relations

• Replaced By: SIST EN 10264-4:2012 - Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
• Effective Date: 01-Mar-2012
• Parent: SIST EN 10264-1:2003 - Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 4: Draht aus nichtrostendem StahlFils et produits tréfilés en acier - Fils pour câbles - Partie 4: Fils tréfilés en acier inoxydableSteel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains77.140.20Visokokakovostna jeklaStainless steelsICS:Ta slovenski standard je istoveten z:EN 10264-4:2002SIST EN 10264-4:2003en01-april-2003SIST EN 10264-4:2003SLOVENSKI
STANDARD



SIST EN 10264-4:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10264-4August 2002ICS 77.140.20; 77.140.65English versionSteel wire and wire products - Steel wire for ropes - Part 4:Stainless steel wireFils et produits tréfilés en acier - Fils pour câbles - Partie 4:Fils tréfilés en acier inoxydableStahldraht und Drahterzeugnisse - Stahldraht für Seile -Teil 4: Draht aus nichtrostendem StahlThis European Standard was approved by CEN on 4 May 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10264-4:2002 ESIST EN 10264-4:2003



EN 10264-4:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Designation of product.44General conditions of manufacture.44.1Main steel grades and characteristic applications.44.2Chemical composition.54.3Surface condition.65Characteristics and requirements.65.1Tensile strength.65.2Diameter tolerances.65.3Ductility.75.4Magnetic permeability.76Test methods.76.1General.76.2Dimension of wire.76.3Tensile test.76.4Reverse bend test.86.5Wrapping test.86.6Tensile test on knotted wire.86.7Magnetic permeability.8SIST EN 10264-4:2003



EN 10264-4:2002 (E)3ForewordThis document EN 10264-4:2002 has been prepared by Technical Committee ECISS/TC 30 "Steel wires", thesecretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2003, and conflicting national standards shall be withdrawn at the latestby February 2003.This European Standard for wire for ropes is made up of the following parts:Part 1: General requirements.Part 2: Cold drawn non alloy steel wire for ropes for general applications.Part 3: Cold drawn and cold shaped non alloy steel wire for high duty applications.Part 4: Stainless steel wire.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 10264-4:2003



EN 10264-4:2002 (E)41 ScopeThis Part of this European Standard specifies the characteristics of stainless steel wire for the manufacture of ropesthat are exposed to corrosion and in some cases to a moderate temperature.This part of this European Standard specifies the following for stainless steel wire for ropes¾ dimensional tolerances;¾ mechanical cha
...