SIST EN 2591-6303:2004

Aerospace series - Elements of electrical and optical connection - Test methods - Part 6303: Optical elements - Cold/low pressure and damp heat

This standard specifies a method of checking the long term stability of optical connection elements (including permanent connections) and fibre optic couplers.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6303: Optische Elemente - Kälte/niedriger Luftdruck und feuchte Wärme

Diese Norm legt ein Verfahren zum Nachweis der Langzeitstabilität von optischen Verbindungselementen (einschließlich dauerhaften Verbindungen) und LWL-Kopplern fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6303 : Organes optiques - Froid/basse pression et chaleur humide

La présente norme prescrit une méthode pour vérifier la stabilité, sur une longue durée, d'organes de connexion optique (y compris les connexions permanentes) et de coupleurs a fibre optique.
Elle doit etre utilisée conjointement avec EN 2591-100.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 6303: Optical elements - Cold/low pressure and damp heat

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I08 - Imaginarni 08
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN 2591-6303:2001 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6303: Optical elements - Cold/low pressure and damp heat

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 6303: Optical elements - Cold/low pressure and damp heatLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6303: Optische Elemente - Kälte/niedriger Luftdruck und feuchte WärmeSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6303 : Organes optiques - Froid/basse pression et chaleur humideAerospace series - Elements of electrical and optical connection - Test methods - Part 6303: Optical elements - Cold/low pressure and damp heat49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-6303:2001SIST EN 2591-6303:2004en01-maj-2004SIST EN 2591-6303:2004SLOVENSKI
STANDARD



SIST EN 2591-6303:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-6303November 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 6303: Optical elements - Cold/lowpressure and damp heatSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 6303: Organesoptiques - Froid/basse pression et chaleur humideLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 6303: OptischeElemente - Kälte/niedriger Luftdruck und feuchte WärmeThis European Standard was approved by CEN on 4 June 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-6303:2001 ESIST EN 2591-6303:2004



EN 2591-6303:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorseme
...