oSIST prEN ISO 7510:2023
(Main)Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
ISO 7510:2017 specifies a method for the determination of constituent materials of a test sample cut from a glass-reinforced plastics (GRP) component intended for use in a piping system. It includes determination of resin, glass, aggregate and filler contents.
It is also applicable to the determination of the type and arrangement of the reinforcements. If used to determine the amounts of constituent materials in layered constructions it may be necessary to separate the laminate layers by cutting or splitting and testing each separately.
Kunststoff-Rohrleitungssysteme - Teile aus glasfaserverstärkten Kunststoffen (GFK) - Ermittlung der Gehalte von Bestandteilen (ISO 7510:2017)
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants (ISO 7510:2017)
Cevni sistemi iz polimernih materialov - Sestavni deli iz polimernih materialov, ojačenih s steklenimi vlakni (GRP) - Določanje količine sestavin (ISO 7510:2017)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 7510:2023
01-december-2023
Cevni sistemi iz polimernih materialov - Sestavni deli iz polimernih materialov,
ojačenih s steklenimi vlakni (GRP) - Določanje količine sestavin (ISO 7510:2017)
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of
the amounts of constituents (ISO 7510:2017)
Kunststoff-Rohrleitungssysteme - Teile aus glasfaserverstärkten Kunststoffen (GFK) -
Ermittlung der Gehalte von Bestandteilen (ISO 7510:2017)
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de
verre (PRV) - Détermination des teneurs des constituants (ISO 7510:2017)
Ta slovenski standard je istoveten z: prEN ISO 7510
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
83.120 Ojačani polimeri Reinforced plastics
oSIST prEN ISO 7510:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 7510:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 7510:2023
INTERNATIONAL ISO
STANDARD 7510
Second edition
2017-06
Plastics piping systems — Glass-
reinforced plastics (GRP) components
— Determination of the amounts of
constituents
Systèmes de canalisations en matières plastiques — Composants
plastiques renforcés de verre (PRV) — Détermination des teneurs des
constituants
Reference number
ISO 7510:2017(E)
©
ISO 2017
---------------------- Page: 3 ----------------------
oSIST prEN ISO 7510:2023
ISO 7510:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 7510:2023
ISO 7510:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Test piece . 2
6.1 Dimensions . 2
6.2 Number . 3
7 Procedure. 3
8 Calculation and expression of results . 4
9 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.