oSIST prEN ISO 10256-4:2022
(Main)Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO/DIS 10256-4:2021)
Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO/DIS 10256-4:2021)
Schutzausrüstung zum Gebrauch beim Eishockey - Teil 4: Kopf- und Gesichtsschutz für Torhüter (ISO/DIS 10256-4:2021)
ISO 10256-4:202x legt Leistungsanforderungen und Prüfverfahren für Kopf- und Gesichtsschützer zum Gebrauch durch Eishockeytorhüter fest. Sie ist vorgesehen, in Verbindung mit ISO 10256-1:202x, ISO 10256-2:202x und ISO 10256-3:202x verwendet zu werden.
Anforderungen und entsprechende Prüfverfahren, wo anwendbar, sind für folgende Punkte festgelegt:
a) Werkstoffe und Konstruktion;
b) Konstruktion;
c) geschützte Bereiche (Bedeckung);
d) Durchdringungsfestigkeit (Prüfklinge/Prüfscheibe);
e) Stoßdämpfungsvermögen;
f) Puckaufprallwiderstand;
g) Eigenschaften der Trageeinrichtung;
h) Sichtfeld;
i) Prüfbericht;
j) Kennzeichnungen; und
k) Benutzerinformation.
Équipements de protection destinés à être utilisés en hockey sur glace - Partie 4: Protections de tête et de visage pour les gardiens de but (ISO/DIS 10256-4:2021)
Varovalna oprema za uporabo pri hokeju na ledu - 4. del: Zaščita glave in obraza za vratarje (ISO/DIS 10256-4:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 10256-4:2022
01-januar-2022
Varovalna oprema za uporabo pri hokeju na ledu - 4. del: Zaščita glave in obraza
za vratarje (ISO/DIS 10256-4:2021)
Protective equipment for use in ice hockey - Part 4: Head and face protection for
goalkeepers (ISO/DIS 10256-4:2021)
Schutzausrüstung zum Gebrauch beim Eishockey - Teil 4: Kopf- und Gesichtsschutz für
Torhüter (ISO/DIS 10256-4:2021)
Équipements de protection destinés à être utilisés en hockey sur glace - Partie 4:
Protections de tête et de visage pour les gardiens de but (ISO/DIS 10256-4:2021)
Ta slovenski standard je istoveten z: prEN ISO 10256-4
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
97.220.20 Oprema za zimske športe Winter sports equipment
oSIST prEN ISO 10256-4:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 10256-4:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10256-4:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10256-4
ISO/TC 83/SC 5 Secretariat: SCC
Voting begins on: Voting terminates on:
2021-11-16 2022-02-08
Protective equipment for use in ice hockey —
Part 4:
Head and face protection for goalkeepers
ICS: 97.220.20; 13.340.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10256-4:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10256-4:2022
ISO/DIS 10256-4:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10256-4:2022
ISO/DIS 10256-4:2021(E)
Contents Page
Foreword .v
European foreword . vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 Materials and construction . 2
4.1.1 General . 2
4.1.2 Types of goalkeeper head and face protectors . 2
4.2 Design . 2
4.2.1 Welded wire component . 2
4.2.2 Obstruction of vision . 2
4.2.3 Airway access . 3
4.2.4 Overlap . 3
4.2.5 Maximum distance (headform to face protector) . 3
4.2.6 Minimum load bearing area . 3
4.3 Protected area . 3
4.3.1 Protected area of the head . 3
4.3.2 Protected area of the face . 3
4.4 Penetration (test blade/disk) . 3
4.4.1 General . 3
4.4.2 Type D1 . 3
4.4.3 Type D3 . 3
4.5 Shock-absorbing capacity . 3
4.6 Puck impact resistance . 4
4.6.1 Contact test . 4
4.6.2 Toughness test . 4
4.7 Retention system . 4
4.8 Field of vision . 4
5 Test methods . 5
5.1 General . 5
5.1.1 Tolerances . 5
5.1.2 Samples . 5
5.1.3 Complete goalkeeper protector assembled from separate head and face
protectors . 5
5.2 Conditioning. 5
5.3 Goalkeeper protector positioning . 5
5.3.1 Helmet-positioning index (HPI) . 5
5.3.2 Placing and adjusting goalkeeper protector . 5
5.4 Protected area (coverage) test . 5
5.4.1 Protected area of the head . 5
5.4.2 Protected area of the face . 5
5.5 Penetration test . 6
5.5.1 General . 6
5.5.2 Penetration test over the protected area of the head . . 6
5.5.3 Penetration test over the protected area of the face . 6
5.6 Shock absorbing capacity test . . 6
5.7 Puck impact resistance test . 6
5.8 Retention system . 6
5.9 Field of vision . 7
6 Test report . 7
iii
© ISO 2021 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 10256-4:2022
ISO/DIS 10256-4:2021(E)
7 Markings . 7
8 Information for users . 7
ANNEX ZA (informative) Relationship between this European Standard and the essential
requirements of Annex II of Regulation (EU) 2016/425 of the European Parliament
and of the Council of 9 March 2016 on personal protective equipment aimed to be
covered, .13
iv
© ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 10256-4:2022
ISO/DIS 10256-4:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 83, Sports and other recreational facilities
and equipment, Subcommittee SC 5, Ice hockey equipment and facilities.
This second edition, which has been technically revised, cancels and replaces the first edition
(ISO 10256-4:2016).
The main changes compared to the previous edition are as follows:
— Definitions were updated and reordered to reflect their location in the document.
— Clauses 4.1, 4.2, 4.3, 4.4, 5.1.2 and 5.4 were updated.
— Type D2 goalkeeper head and face protector was removed in Clause 4.1.2.
— Table 1 was revised to include additional tests.
— Annex ZA was revised.
A list of all parts in the ISO 10256 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
© ISO 2021 – All rights reserved
---------------------- Page: 7 ----------------------
oSIST prEN ISO 10256-4:2022
ISO/DIS 10256-4:2021(E)
European foreword
This document (ISO 10256-4:202x) has been prepared by Technical Committee ISO/TC 83, “Sports and
other recreational facilities and equipment” /SC 5 “Ice hockey equipment and facilities” in collaboration
with Technical Committee CEN/TC 158 “Head protection” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by Month 202x, and conflicting national standards shall
be withdrawn at the latest by Month 202x.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request (M/571) given to CEN by the
European Commission and the European Free Trade Association and supports essential requirements
of Regulation (EU) 2016/425.
For the relationship with EU Regulation, see informative Annex ZA, which is an integral part of this
document.
In accordance with the CEN-CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic
of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10256-4:202x has been approved by CEN as ISO 10256-4:202x without any modification.
vi
© ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
oSIST prEN ISO 10256-4:2022
ISO/DIS 10256-4:2021(E)
Introduction
Ice hockey is a high speed, collision sport in which there is a risk of injury. The objective of ISO 10256-
4:202x is to specify requirements for head and face protectors to be used by ice hockey goalkeepers,
considering the risks inherent in participating in the sport, many of which cannot be eliminated by
protective equipment. By playing this sport, participants accept the risk of serious injury, paralysis, or
death.
This standard was developed to address the unique demands and hazards associated with t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.