SIST EN 15583-2:2012
(Main)Winter maintenance equipment - Snow ploughs - Part 2: Testing criteria and their requirements
Winter maintenance equipment - Snow ploughs - Part 2: Testing criteria and their requirements
This document is valid for snow ploughs designed to be fitted to winter maintenance vehicles on their frontmounting
plates according to EN 15432 and also for side-mounted snow ploughs.
Requirements regarding the testing of override security systems and/or bump security systems of frontmounted
or side-mounted snow ploughs for winter service are determined by this document. This document is
meant to assess the demands made on snow ploughs operated in traffic.
The document is valid for:
- single-side snow ploughs;
- variable V-ploughs;
The following points are not standardized by this document:
- V-shaped snow ploughs;
- requirements for registration and approval;
- requirements made by carrier vehicle manufacturers;
- requirements on safety – these are dealt with in EN 13021.
Winterdienstausrüstung - Schneepflüge - Teil 2: Prüfkriterien und deren Anforderungen
Dieses Dokument gilt für Schneepflüge, die nach EN 15432 mittels Anbauplatten an Winterdienstfahrzeugen montiert werden sowie für seitlich montierte Schneepflüge.
Es werden Anforderungen für die Prüfung der Überfahrsicherung und des Anfahrschutzes von im Winterdienst eingesetzten Front- oder Seitenpflügen festgelegt. Das Dokument legt die Anforderungen fest, die Schneepflüge erfüllen müssen, die im öffentlichen Verkehr zum Einsatz kommen.
Geltungsbereich:
- einseitig räumende Schneepflüge;
- Variable Pflüge.
Folgende Punkte sind nicht Gegenstand dieses Regelwerkes:
- Keilpflüge;
- Anforderungen für die Anmeldung und Zulassung;
- Anforderungen der Fahrzeughersteller;
- Sicherheitstechnische Anforderungen — diese werden in EN 13021 behandelt.
Matériels de viabilité hivernale - Lames de déneigement - Partie 2: Critères d'essai et exigences
Le présent document s’applique aux lames de déneigement conçues pour équiper les plaques de base avant des véhicules de viabilité hivernale conformément à l’EN 15432. Le document s’applique aussi aux ailerons.
Il établit les exigences concernant les essais sur les systèmes de sécurité et/ou les systèmes de protection contre les chocs des lames frontales ou des ailerons utilisés lors du service de la viabilité hivernale. L'objet du présent document est d'évaluer les exigences relatives aux lames de déneigement opérant sur la chaussée.
Le document s’applique aux :
- lames biaises ;
- étraves transformables.
Le présent document ne réglemente pas les éléments suivant :
- lames de déneigement en forme de V ;
- exigences d'enregistrement et d'homologation ;
- exigences des fabricants de véhicules porteurs ;
- exigences de sécurité, traitées dans l'EN 13021.
Oprema za zimska vzdrževalna dela - Snežni plugi - 2. del: Merila za preskušanje in njihove zahteve
Ta dokument velja za snežne pluge, ki so izdelani za nameščanje na sprednje plošče zimskih vzdrževalnih vozil v skladu s standardom EN 15432 ter tudi za stransko nameščene snežne pluge.
Zahteve v zvezi s preskušanjem varnostnih sistemov za prevoženje in/ali ovire za spredaj nameščene ali stransko nameščene snežne pluge za zimsko službo so določene v tem dokumentu. Ta dokument je namenjen ocenjevanju zahtev za snežne pluge, ki delujejo v prometu.
Ta dokument velja za:
– enostranske snežne pluge;
– variabilne V-pluge.
Ta dokument ne zajema naslednjih točk:
– snežni plugi v obliki V;
– zahteve za registracijo in odobritev;
– zahteve proizvajalcev nosilnih vozil;
– zahteve v zvezi z varnostjo – te so obravnavane v standardu EN 13021.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za zimska vzdrževalna dela - Snežni plugi - 2. del: Merila za preskušanje in njihove zahteveWinterdienstausrüstung - Schneepflüge - Teil 2: Prüfkriterien und deren AnforderungenMatériels de viabilité hivernale - Lames de déneigement - Partie 2: Critères d'essai et exigencesWinter maintenance equipment - Snow ploughs - Part 2: Testing criteria and their requirements43.160Vozila za posebne nameneSpecial purpose vehiclesICS:Ta slovenski standard je istoveten z:EN 15583-2:2012SIST EN 15583-2:2012en,fr,de01-maj-2012SIST EN 15583-2:2012SLOVENSKI
STANDARD
SIST EN 15583-2:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15583-2
February 2012 ICS 43.160 English Version
Winter maintenance equipment - Snow ploughs - Part 2: Testing criteria and their requirements
Matériels de viabilité hivernale - Lames de déneigement - Partie 2: Critères d'essai et exigences
Winterdienstausrüstung - Schneepflüge - Teil 2: Prüfkriterien und deren Anforderungen This European Standard was approved by CEN on 14 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15583-2:2012: ESIST EN 15583-2:2012
EN 15583-2:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Requirements .54.1 General requirements .54.2 Testing criteria – static .54.2.1 General .54.2.2 Description of the test bench .54.3 Testing criteria – dynamic .74.3.1 General .74.3.2 Validation criteria after testing .94.3.3 Side reverse test criteria of front-mounted snow plough and variable V-ploughs .9Annex A (informative) Test protocol . 10Bibliography . 11 SIST EN 15583-2:2012
EN 15583-2:2012 (E) 3 Foreword This document (EN 15583-2:2012) has been prepared by Technical Committee CEN/TC 337 “Winter maintenance and road service area maintenance equipment”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 15583-2:2012
EN 15583-2:2012 (E) 4
1 Scope This European standard is valid for snow ploughs designed to be fitted to winter maintenance vehicles on their front-mounting plates according to EN 15432 and also for side-mounted snow ploughs. Requirements regarding the testing of override security systems and/or bump security systems of front-mounted or side-mounted snow ploughs for winter service are determined by this document. This document is meant to assess the demands made on snow ploughs operated in traffic. The document is valid for: single-side snow ploughs; variable V-ploughs. The following points are not standardized by this document: V-shaped snow ploughs; requirements for registration and approval; requirements made by carrier vehicle manufacturers; requirements on safety – these are dealt with in EN 1302
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.