SIST EN 1895:2002

Adhesives for paper and board, packaging and disposable sanitary products - 180° - "T" peel test for a flexible-to-flexible assembly

This European standard specifies a 180° - "T" peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two flexible adherends which may have an equal or different flexural modulus.

Klebstoffe für Papier, Verpackung und Hygieneprodukte - 180°-"T"-Schälprüfung für flexibel/flexibel geklebte Proben

Diese Europäische Norm beschreibt eine 180°-?T"-Schälprüfung unter festgelegten Bedingungen zur Bestimmung des Schälwiderstandes einer Klebung, die aus zwei flexiblen Fügeteilen hergestellt ist, die einen gleichen oder unterschiedlichen Biegemodul haben können.

Adhésifs pour papier et carton, emballage et produits sanitaires jetables - Essai de pelage en "T" a 180° pour un assemblage flexible sur flexible

La présente Norme européenne spécifie un essai de pelage en T a 180° pour la détermination, dans des conditions spécifiées, de la résistance au pelage d'un assemblage collé de deux supports flexibles pouvant présenter des modules de flexion identiques ou différents.

Lepila za papir in karton za embalažo in higienske izdelke za enkratno uporabo - 180o - T-preskus luščenja za spoje dveh gibkih lepljencev

General Information

• Status: Published
• Publication Date: 31-Aug-2002
• ICS: 83.180 - Adhesives
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Ref Project: EN 1895:2001 - Adhesives for paper and board, packaging and disposable sanitary products - 180° - "T" peel test for a flexible-to-flexible assembly

Relations

• Corrected By: SIST EN 1895:2002/AC:2007 - Adhesives for paper and board, packaging and disposable sanitary products - 180°-"T" peel test for a flexible-to-flexible assembly
• Effective Date: 01-Oct-2007

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klebstoffe für Papier, Verpackung und Hygieneprodukte - 180°-"T"-Schälprüfung für flexibel/flexibel geklebte ProbenAdhésifs pour papier et carton, emballage et produits sanitaires jetables - Essai de pelage en "T" a 180° pour un assemblage flexible sur flexibleAdhesives for paper and board, packaging and disposable sanitary products - 180° - "T" peel test for a flexible-to-flexible assembly83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 1895:2001SIST EN 1895:2002en01-september-2002SIST EN 1895:2002SLOVENSKI
STANDARD



SIST EN 1895:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1895October 2001ICS 83.180English versionAdhesives for paper and board, packaging and disposablesanitary products – 180°-”T” peel test for a flexible-to-flexibleassemblyAdhésifs pour papier et carton, emballage et produitssanitaires jetables - Essai de pelage en “T” à 180° pour unassemblage flexible sur flexibleKlebstoffe für Papier, Verpackung und Hygieneprodukte –180°-”T”-Schälprüfung für flexibel/flexibel geklebte ProbenThis European Standard was approved by CEN on 30 September 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1895:2001 ESIST EN 1895:2002



EN 1895:2001 (E)2ContentspageForeword.3Introduction.41Scope.42Normative references.43Terms and definitions.44Principle.55Safety.56Apparatus and material.57Test specimens.58Conditioning and test atmosphere.89Procedure.810Expression of results.811Test report.9SIST EN 1895:2002



EN 1895:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 193 "Adhesives", the secretariat ofwhich is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest byApril 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 1895:2002



EN 1895:2001 (E)4IntroductionPeel testing for adhesive bonds is widely used for assessing the performance of adhesives and, because of thewide diversity of the flexibility of substrates which can be used, no single peel test will fulfil the requirements of allcases.This European Standard is intended to test an assembly consisting of two flexible adherends.“T” peel test can also be made in compliance withEN 28510-1, Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90° peel (ISO8510-1:1990).EN 28510-2, Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 180° peel (ISO8510-2:1990).1ScopeThis European standard specifies a 180° - "T" peel test for the determination, under specified conditions, of thepeel resistance of a bonded assembly of two flexible adherends which may have an equal or different flexuralmodulus.2Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 923Adhesives - Terms and definitions.EN 1066Adhesives - Sampling.EN 1067Adhesives - Examination and preparation of samples for testing.EN ISO 10365Adhesives – Designation of main failure patterns (ISO10365:1992).ISO 554Standard atmospheres for conditioning and/
...