oSIST prEN 1993-2:2024

Eurocode 3 - Design of steel structures - Part 2: Bridges

(1) EN 1993-2 provides a general basis for the structural design of steel bridges and steel parts of composite bridges. It gives provisions that supplement, modify or supersede the equivalent provisions given in the various parts of EN 1993-1.
(2) The design criteria for composite bridges are covered in EN 1994-2.
(3) The design of high strength cables and related parts are included in EN 1993-1-11.
(4) This European Standard is concerned only with the resistance, serviceability and durability of bridge structures. Other aspects of design are not considered.
(5) For the execution of steel bridge structures, EN 1090 should be taken into account.
NOTE: As long as EN 1090 is not yet available a provisional guidance is given in Annex C.
(6) Execution is covered to the extent that is necessary to indicate the quality of the construction materials and products that should be used and the standard of workmanship needed to comply with the assumptions of the design rules.
(7) Special requirements of seismic design are not covered. Reference should be made to the requirements given in EN 1998, which complements and modifies the rules of EN 1993-2 specifically for this purpose.

Eurocode 3 - Bemessung und konstruktion von Stahlbauten - Teil 2: Brücken

Eurocode 3 - Calcul des structures en acier - Partie 2: Ponts

Evrokod 3 - Projektiranje jeklenih konstrukcij - 2. del: Mostovi

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Jun-2024
• ICS: 91.010.30 - Technical aspects
• ICS: 91.080.13 - Steel structures
• ICS: 93.040 - Bridge construction
• Technical Committee: KON - Structures
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 04-Apr-2024
• Due Date: 22-Aug-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/515 - Mandate for amending existing Eurocodes and extending the scope of structural Eurocodes
• Ref Project: prEN 1993-2 - Eurocode 3 - Design of steel structures - Part 2: Bridges

Relations

• Revises: SIST EN 1993-2:2007 - Eurocode 3 - Design of steel structures - Part 2: Steel Bridges
• Effective Date: 19-Jun-2019

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 1993-2:2024
01-junij-2024
Evrokod 3 - Projektiranje jeklenih konstrukcij - 2. del: Mostovi
Eurocode 3 - Design of steel structures - Part 2: Bridges
Eurocode 3 - Bemessung und konstruktion von Stahlbauten - Teil 2: Brücken
Eurocode 3 - Calcul des structures en acier - Partie 2: Ponts
Ta slovenski standard je istoveten z: prEN 1993-2
ICS:
91.010.30 Tehnični vidiki Technical aspects
91.080.13 Jeklene konstrukcije Steel structures
93.040 Gradnja mostov Bridge construction
oSIST prEN 1993-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1993-2:2024

---------------------- Page: 2 ----------------------
oSIST prEN 1993-2:2024


DRAFT
EUROPEAN STANDARD
prEN 1993-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2024
ICS 91.010.30; 91.080.13; 93.040 Will supersede EN 1993-2:2006
English Version

Eurocode 3 - Design of steel structures - Part 2: Bridges
Eurocode 3 - Calcul des structures en acier - Partie 2: Eurocode 3 - Bemessung und konstruktion von
Ponts Stahlbauten - Teil 2: Brücken
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 250.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1993-2:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1993-2:2024
prEN 1993-2:2024 (E)
Contents
Page
European foreword . 7
Introduction . 8
0.1 Introduction to the Eurocodes . 8
0.2 Introduction to EN 1993 (all parts) . 8
0.3 Introduction to prEN 1993-2 . 9
0.4 Verbal forms used in the Eurocodes . 10
0.5 National annex for prEN 1993-2 . 10
1 Scope . 12
1.1 Scope of prEN 1993-2 . 12
1.2 Assumptions . 12
2 Normative references . 12
3 Terms, definitions and symbols .
...