iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 389-3:2016/oprA1:2020

(Amendment)

Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators - Amendment 1 (ISO 389-3:2016/DAM 1:2020)

Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators - Amendment 1 (ISO 389-3:2016/DAM 1:2020)

2021-04-14 (data): WI abandoned following cancellation of equivalent ISO WI.

Akustik - Standard-Bezugspegel für die Kalibrierung audiometrischer Geräte - Teil 3: Äquivalente Bezugs-Schwellenkraftpegel für reine Töne und Knochenleitungshörer; Änderung 1 (ISO 389-3:2016/DAM 1:2020)

[Not available]

Acoustique - Zéro de référence pour l'étalonnage d'équipements audiométriques - Partie 3: Niveaux de référence équivalents de force vibratoire liminaire pour les vibrateurs à sons purs et les ossivibrateurs - Amendement 1 (ISO 389-3:2016/DAM 1:2020)

Akustika - Referenčna ničla za umerjanje avdiometrov - 3. del: Referenčne ekvivalentne ravni za prag vibracijske sile za čiste tone in za kostne vibratorje (vzbujevalnike kostnih vibracij) - Dopolnilo A1 (ISO 389-3:2016/DAM 1:2020)

General Information

Status
Not Published
Public Enquiry End Date
19-Feb-2020
ICS
13.140 - Noise with respect to human beings
17.140.01 - Acoustic measurements and noise abatement in general
Technical Committee
AKU - Acoustics
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
27-Feb-2020
Due Date
16-Jul-2020
Completion Date
17-Apr-2020
Ref Project
EN ISO 389-3:2016/prA1 - Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators - Amendment 1 (ISO 389-3:2016/DAM 1:2020)

Relations

Amends
SIST EN ISO 389-3:2016 - Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators (ISO 389-3:2016)
Effective Date
01-Apr-2020

Buy Standard

EN ISO 389-3:2016/oprA1:2020EN ISO 389-3:2016/oprA1:2020
PreviousNext
Draft
EN ISO 389-3:2016/oprA1:2020
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 389-3:2016/oprA1:2020
01-april-2020
Akustika - Referenčna ničla za umerjanje avdiometrov - 3. del: Referenčne
ekvivalentne ravni za prag vibracijske sile za čiste tone in za kostne vibratorje
(vzbujevalnike kostnih vibracij) - Dopolnilo A1 (ISO 389-3:2016/DAM 1:2020)
Acoustics - Reference zero for the calibration of audiometric equipment - Part 3:
Reference equivalent threshold vibratory force levels for pure tones and bone vibrators -
Amendment 1 (ISO 389-3:2016/DAM 1:2020)
Acoustique - Zéro de référence pour l'étalonnage d'équipements audiométriques - Partie
3: Niveaux de référence équivalents de force vibratoire liminaire pour les vibrateurs à
sons purs et les ossivibrateurs - Amendement 1 (ISO 389-3:2016/DAM 1:2020)
Ta slovenski standard je istoveten z: EN ISO 389-3:2016/prA1
ICS:
13.140 Vpliv hrupa na ljudi Noise with respect to human
beings
17.140.01 Akustična merjenja in Acoustic measurements and
blaženje hrupa na splošno noise abatement in general
SIST EN ISO 389-3:2016/oprA1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 389-3:2016/oprA1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 389-3:2016/oprA1:2020
DRAFT AMENDMENT
ISO 389-3:2016/DAM 1
ISO/TC 43 Secretariat: DIN
Voting begins on: Voting terminates on:
2020-02-10 2020-05-04
Acoustics — Reference zero for the calibration of
audiometric equipment —
Part 3:
Reference equivalent threshold vibratory force levels for
pure tones and bone vibrators
AMENDMENT 1
Acoustique — Zéro de référence pour l'étalonnage d'équipements audiométriques —
Partie 3: Niveaux de référence équivalents de force vibratoire liminaire pour les vibrateurs à sons purs et
les ossivibrateurs
AMENDEMENT 1
ICS: 13.140
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 389-3:2016/DAM 1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
SIST EN ISO 389-3:2016/oprA1:2020
ISO 389-3:2016/DAM 1:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rig
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 8253-3:2022(Main)
Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2022)
EN ISO 8253-3:2022

This document specifies basic methods for speech recognition tests for audiological applications.
NOTE       Examples of speech materials are given in Annex A.
In order to ensure minimum requirements of precision and comparability between different test procedures including speech recognition tests in different languages, this document specifies requirements for the composition, validation and evaluation of speech test materials, and the realization of speech recognition tests. This document does not specify the contents of the speech material because of the variety of languages.
Furthermore, this document also specifies the determination of reference values and requirements for the realization and manner of presentation. In addition, there are features of speech tests described which are important to be specified, but which are not understood as a requirement.
This document specifies procedures and requirements for speech audiometry with the recorded test material being presented by an audiometer through a transducer, e.g., an earphone, bone vibrator, or loudspeaker arrangement for sound field audiometry. Methods for using noise either for masking the non-test ear or as a competing sound are described.
Some test subjects, for example children, can require modified test procedures not specified in this document.
Specialized tests, such as those used for evaluating directional hearing and dichotic hearing, are outside the scope of this document.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 389-7:2020(Main)
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:2019)
EN ISO 389-7:2019

EN-ISO 389-7 in addition to ISO 16092-1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of pneumatic presses which are intended to work cold metal or material partly of cold metal. This document deals with all significant hazards relevant for pneumatic presses, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All the phases of the lifetime of the machinery as described in ISO 12100:2010, 5.4, have been taken into consideration. The data are given in numerical form for the preferred frequencies in the one-third-octave series from 20 Hz to 16 000 Hz inclusive in accordance with ISO 266 and, in addition, for some intermediate audiometric frequencies up to 18 000 Hz. The threshold data differ from the audiometric zero specified in ISO 389-1, ISO 389-2, ISO 389-5 and ISO 389-8, since the latter refer to monaural listening through earphones with sound pressure levels referred to specified couplers and ear simulators. Direct comparison between the data in the parts of ISO 389 mentioned above and in this document is therefore not appropriate.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 389-1:2018(Main)
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:2017)
EN ISO 389-1:2018

This document specifies a standard reference zero for the scale of hearing threshold level applicable
to pure-tone air conduction audiometers, to promote agreement and uniformity in the expression of
hearing threshold level measurements throughout the world.
It states the information in a form suitable for direct application to the calibration of audiometers, that
is, in terms of the reference equivalent threshold sound pressure levels of generic supra-aural earphones
specified in 4.2, measured on an ear simulator complying with IEC 60318-1 and in terms of modelspecific
data given in two additional tables for the IEC 60318-3 acoustic coupler and the IEC 60318-1
ear simulator, respectively.
The data are based on an assessment of the information available from the various standardizing
laboratories responsible for audiometric standards and from scientific publications.
Some notes on the application and derivation of the reference levels are given in Annexes A and B.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 1996-2:2017
Acoustics - Description, measurement and assessment of environmental noise - Part 2: Determination of sound pressure levels
ISO 1996-2:2017

This document describes how sound pressure levels intended as a basis for assessing environmental
noise limits or comparison of scenarios in spatial studies can be determined. Determination can be
done by direct measurement and by extrapolation of measurement results by means of calculation.
This document is primarily intended to be used outdoors but some guidance is given for indoor
measurements as well. It is flexible and to a large extent, the user determines the measurement effort
and, accordingly, the measurement uncertainty, which is determined and reported in each case. Thus,
no limits for allowable maximum uncertainty are set up. Often, the measurement results are combined
with calculations to correct for reference operating or propagation conditions different from those
during the actual measurement. This document can be applied on all kinds of environmental noise
sources, such as road and rail traffic noise, aircraft noise and industrial noise.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    60 pages
    English language
    sale 15% off
  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 1996-1:2016
Acoustics -- Description, measurement and assessment of environmental noise -- Part 1: Basic quantities and assessment procedures
ISO 1996-1:2016

This part of ISO 1996 defines the basic quantities to be used for the description of noise in community
environments and describes basic assessment procedures. It also specifies methods to assess
environmental noise and gives guidance on predicting the potential annoyance response of a community
to long-term exposure from various types of environmental noises. The sound sources can be separate
or in various combinations. Application of the method to predict annoyance response is limited to areas
where people reside and to related long-term land uses.
Community response to noise can vary differently among sound sources that are observed to have
the same acoustic levels. This part of ISO 1996 describes adjustments for sounds that have different
characteristics. The term “rating level” is used to describe physical sound predictions or measurements
to which one or more adjustments have been added. On the basis of these rating levels, the long-term
community response can be estimated.
The sounds are assessed either singly or in combination, allowing for consideration, when deemed
necessary by responsible authorities, of the special characteristics of their impulsiveness, tonality,
and low-frequency content, and for the different characteristics of road-traffic noise, other forms of
transportation noise (such as aircraft noise), and industrial noise.
This part of ISO 1996 does not specify limits for environmental noise.
NOTE 1 In acoustics, several different physical measures describing sound can have their level expressed in
decibels (e.g. sound pressure, maximum sound pressure, and equivalent continuous sound pressure). The levels
corresponding to these physical measures normally will differ for the same sound. This often leads to confusion.
Therefore, it is necessary to specify the underlying physical quantity (e.g. sound pressure level, maximum sound
pressure level, and equivalent continuous sound pressure level).
NOTE 2 In this part of ISO 1996, quantities are expressed as levels in decibels. However, some countries
validly express the underlying physical quantity, such as maximum sound pressure, in pascal or sound exposure
in pascal-squared seconds.
NOTE 3 ISO 1996-2 deals with the determination of sound pressure levels.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    47 pages
    English language
    sale 15% off
  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 389-3:2016(Main)
Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators (ISO 389-3:2016)
EN ISO 389-3:2016

This part of ISO 389 specifies the following data applicable to the calibration of bone vibrators for puretone
bone-conduction audiometry:
a) reference equivalent threshold vibratory force levels (RETVFL), corresponding to the threshold of
hearing of young otologically normal persons by bone-conduction audiometry;
b) essential characteristics of the bone vibrator and the method of coupling to the test subject, and to
the mechanical coupler;
c) essential characteristics of the masking noise and the baseline masking noise level applied to the
ear not under test.
Guidance on the practical application of this part of ISO 389 in the calibration of audiometers is
given in Annex B.
RETVFL is the vibratory force level transmitted to a mechanical coupler of specified characteristics by a
vibrator when applied to the mechanical coupler under stated conditions of test and when energized at the
voltage level corresponding to the normal threshold of hearing for location on the mastoid prominence.
NOTE 1 Values for the differences in reference equivalent threshold vibratory force levels between location on
the forehead and mastoid are included for information in Annex C.
NOTE 2 Recommended procedures for carrying out bone-conduction audiometry are specified in ISO 8253‑1.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8253-1:2011(Main)
Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010)
EN ISO 8253-1:2010

This part of ISO 8253 specifies procedures and requirements for pure-tone air conduction and bone conduction threshold audiometry. For screening purposes, only pure-tone air conduction audiometric test methods are specified. It is possible that the procedures are not appropriate for special populations, e.g. very young children. This part of ISO 8253 does not cover audiometric procedures to be carried out at levels above the hearing threshold levels of the subjects. Procedures and requirements for speech audiometry, electrophysiological audiometry, and where loudspeakers are used as a sound source are not specified.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8253-2:2010(Main)
Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals (ISO 8253-2:2009)
EN ISO 8253-2:2009

This part of ISO 8253 specifies relevant test signal characteristics, requirements for free, diffuse, and quasi-free sound fields, and procedures for sound field audiometry using pure tones, frequency-modulated tones or other narrow-band test signals presented by means of one or more loudspeakers. The primary purpose is the determination of hearing threshold levels in the frequency range 125 Hz to 8 000 Hz, but this range can be extended to 20 Hz to 16 000 Hz. This part of ISO 8253 does not include specifications for the use of hand-held loudspeakers. Speech as a test signal is not covered. The purpose of this part of ISO 8253 is to ensure that tests of hearing, using sound field audiometry, give as high a degree of accuracy and reproducibility as possible. Examples of graphical representations of the results are given in Annex A.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8253-3:2022(Main)
Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2022)
EN ISO 8253-3:2022

This document specifies basic methods for speech recognition tests for audiological applications.
NOTE       Examples of speech materials are given in Annex A.
In order to ensure minimum requirements of precision and comparability between different test procedures including speech recognition tests in different languages, this document specifies requirements for the composition, validation and evaluation of speech test materials, and the realization of speech recognition tests. This document does not specify the contents of the speech material because of the variety of languages.
Furthermore, this document also specifies the determination of reference values and requirements for the realization and manner of presentation. In addition, there are features of speech tests described which are important to be specified, but which are not understood as a requirement.
This document specifies procedures and requirements for speech audiometry with the recorded test material being presented by an audiometer through a transducer, e.g., an earphone, bone vibrator, or loudspeaker arrangement for sound field audiometry. Methods for using noise either for masking the non-test ear or as a competing sound are described.
Some test subjects, for example children, can require modified test procedures not specified in this document.
Specialized tests, such as those used for evaluating directional hearing and dichotic hearing, are outside the scope of this document.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 389-7:2020(Main)
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:2019)
EN ISO 389-7:2019

EN-ISO 389-7 in addition to ISO 16092-1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of pneumatic presses which are intended to work cold metal or material partly of cold metal. This document deals with all significant hazards relevant for pneumatic presses, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All the phases of the lifetime of the machinery as described in ISO 12100:2010, 5.4, have been taken into consideration. The data are given in numerical form for the preferred frequencies in the one-third-octave series from 20 Hz to 16 000 Hz inclusive in accordance with ISO 266 and, in addition, for some intermediate audiometric frequencies up to 18 000 Hz. The threshold data differ from the audiometric zero specified in ISO 389-1, ISO 389-2, ISO 389-5 and ISO 389-8, since the latter refer to monaural listening through earphones with sound pressure levels referred to specified couplers and ear simulators. Direct comparison between the data in the parts of ISO 389 mentioned above and in this document is therefore not appropriate.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day