Powered industrial trucks - Visibility - test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier

This European Standard specifies the requirements and test procedures for 360° visibility of sit-on and stand-on self-propelled
-   towing and pushing tractors in accordance with 3.1 and 3.2 of ISO 5053-1:2015;
-   burden carrier in accordance with 3.25 of ISO 5053-1:2015 without load and
-   baggage and equipment tractors with driver's accommodation in accordance with EN 12312-15, without load
(herein after referred to as trucks)  and is intended to be used in conjunction with EN 16842-1.
Where specific requirements in this part are modified from the general requirements in EN 16842-1, the requirements of this part are truck specific and to be used for sit-on and stand-on self-propelled Towing and Pushing tractors and Burden carrier.
This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events  relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This part of the European Standard does not apply to personnel carrier in accordance with 3.25 of ISO 5053-1:2015.

Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Prüfverfahren und Verifikation - Teil 10: Schlepper und Schubschlepper und Lastentransportfahrzeuge

Diese Europäische Norm legt die Anforderungen und Prüfverfahren für die Rundumsicht (360°) von motorkraftbetriebenen
— Schleppern und Schubschleppern in Übereinstimmung mit ISO 5053-1:2015, 3.1 und 3.2;
— unbeladenen Lastentransportfahrzeugen in Übereinstimmung mit ISO 5053-1:2015, 3.25 und
— unbeladenen Gepäck- und Geräteschleppern mit Fahrerplatz in Übereinstimmung mit EN 12312-15
mit Fahrersitz oder Fahrerstand (nachfolgend als „Flurförderzeuge“ bezeichnet) fest und ist in Verbindung mit EN 16842-1 anzuwenden.
Wenn spezifische Anforderungen in diesem Teil von den allgemeinen Anforderungen in EN 16842-1 abweichen, sind die Anforderungen in diesem Teil für das Flurförderzeug spezifisch und für motorkraftbetriebene Schlepper und Schubschlepper und Lastentransportfahrzeuge mit Fahrersitz oder Fahrerstand anzuwenden.
Dieser Teil von EN 16842 behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder Gefährdungsereignisse, die für die Sichtverhältnisse des Bedieners bei vorgesehener Nutzung der betreffenden Maschinen und bei unter normalen Umständen durch den Hersteller vorhersehbaren Fehlanwendungen relevant sind.
Dieser Teil der Europäischen Norm gilt nicht für Personentransportfahrzeuge in Übereinstimmung mit ISO 5053-1:2015, 3.25.

Chariots de manutention automoteurs - Visibilité - Méthodes d'essai et vérification - Partie 10 : Tracteur, pousseur et transporteur de charge

Le présent document spécifie les prescriptions et les modes opératoires d’essai pour la visibilité sur 360° des chariots automoteurs à conducteur assis et debout
— tracteur et pousseur conformes aux 3.1 et 3.2 de l’ISO 5053-1:2015 ;
— transporteur de charge conforme au 3.25 de l’ISO 5053-1:2015 sans charge et
— tracteurs à bagages et matériels avec un poste de conduite conformes à l’EN 12312-15, sans charge
(ci-après désignés chariots) et est destiné à être utilisé conjointement avec l’EN 16842-1.
Lorsque des prescriptions spécifiques de la présente partie sont modifiées par rapport aux prescriptions générales de l'EN 16842-1, les prescriptions de la présente partie sont spécifiques au chariot et sont à utiliser pour les tracteur, pousseur et transporteur de charge automoteurs à conducteur assis et debout.
La présente partie de l'EN 16842 traite de tous les phénomènes dangereux, situations dangereuses ou événements dangereux significatifs relatifs à la visibilité du conducteur pour les machines concernées lorsqu'elles sont utilisées comme prévu et dans des conditions de mauvaise utilisation raisonnablement prévisible par le fabricant.
La présente partie ne s’applique pas aux transporteurs de personnel conforme au 3.25 de l’ISO 5053-1:2015.

Vozila za talni transport - Gnana vozila za talni transport - Vidno polje voznika - Preskusna metoda in preverjanje - 10. del: Vlačilci in vlečni traktorji ter tovorna vozila

General Information

Status
Published
Public Enquiry End Date
12-May-2019
Publication Date
09-Nov-2020
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Aug-2020
Due Date
29-Oct-2020
Completion Date
10-Nov-2020

Buy Standard

Standard
SIST EN 16842-10:2020
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 16842-10:2020
01-december-2020

Vozila za talni transport - Gnana vozila za talni transport - Vidno polje voznika -

Preskusna metoda in preverjanje - 10. del: Vlačilci in vlečni traktorji ter tovorna

vozila

Powered industrial trucks - Visibility - test methods and verification - Part 10: Towing and

Pushing tractors and Burden carrier

Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Prüfverfahren und Verifikation - Teil

10: Schlepper und Schubschlepper und Lastentransportfahrzeuge

Chariots de manutention automoteurs - Visibilité - Méthodes d'essai et vérification -

Partie 10 : Tracteur, pousseur et transporteur de charge
Ta slovenski standard je istoveten z: EN 16842-10:2020
ICS:
53.060 Industrijski tovornjaki Industrial trucks
SIST EN 16842-10:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16842-10:2020
---------------------- Page: 2 ----------------------
SIST EN 16842-10:2020
EN 16842-10
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2020
EUROPÄISCHE NORM
ICS 53.060
English Version
Powered industrial trucks - Visibility - Test methods and
verification - Part 10: Towing and Pushing tractors and
Burden carrier

Chariots de manutention automoteurs - Visibilité - Kraftbetriebene Flurförderzeuge - Sichtverhältnisse -

Méthodes d'essai et vérification - Partie 10 : Tracteur, Prüfverfahren und Verifikation - Teil 10: Schlepper und

pousseur et transporteur de charge Schubschlepper und Lastentransportfahrzeuge
This European Standard was approved by CEN on 5 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16842-10:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 16842-10:2020
EN 16842-10:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative reference(s) ................................................................................................................................ 5

3 Terms and definitions ................................................................................................................................... 6

4 Truck configuration ....................................................................................................................................... 6

5 Test equipment ................................................................................................................................................ 6

6 Test procedures for direct visibility......................................................................................................... 6

6.1 General ................................................................................................................................................................ 6

6.2 Lighting equipment position ....................................................................................................................... 7

6.2.1 General ................................................................................................................................................................ 7

6.2.2 Sit-on operated trucks ................................................................................................................................... 7

6.2.3 Stand-on operated trucks ............................................................................................................................. 7

6.3 Test paths for tractors and burden carriers.......................................................................................... 9

6.4 Measurement procedure .............................................................................................................................. 9

6.5 Test procedure for indirect visibility.................................................................................................... 10

7 Acceptance criteria ...................................................................................................................................... 10

7.1 General ............................................................................................................................................................. 10

7.2 Direct visibility .............................................................................................................................................. 10

7.2.1 General ............................................................................................................................................................. 10

7.2.2 Travelling visibility ..................................................................................................................................... 10

7.2.3 Manoeuvring visibility ............................................................................................................................... 10

7.3 Indirect visibility .......................................................................................................................................... 10

7.4 Criteria for tractors ..................................................................................................................................... 11

7.5 Criteria for burden carriers ..................................................................................................................... 12

8 Test report ...................................................................................................................................................... 13

9 Information for use ..................................................................................................................................... 13

---------------------- Page: 4 ----------------------
SIST EN 16842-10:2020
EN 16842-10:2020 (E)
European foreword

This document (EN 16842-10:2020) has been prepared by Technical Committee CEN/TC 150

“Industrial Trucks - Safety”, the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by February 2021, and conflicting national standards

shall be withdrawn at the latest by February 2021.

This document is intended to be used in combination with the requirements in EN 16842-1.

EN 16842 consists of the following parts under the general title Powered industrial trucks – Visibility –

Test methods and verification:
— Part 1: General requirements;

— Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including

10 000 kg capacity;
— Part 3: Reach trucks up to and including 10 000 kg capacity;

— Part 4: Industrial variable-reach trucks up to and including 10 000 kg capacity;

— Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity;

— Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg

capacity;

— Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length

and longer;
— Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity;

— Part 9: Order-picking, lateral- and front-stacking trucks with elevating operator position;

— Part 10: Towing and Pushing tractors and Burden carrier.
It is intended to develop additional parts related to the following machinery:
— Pallet-stacking trucks (rider controlled);
— Single side loader;
— Multi-directional forklift truck;
— Articulated counterbalance lift truck;
— Non-Stacking low-lift straddle carriers (as defined in ISO 5053-1:2020, 3.18);
— Stacking high-lift straddle carriers (as defined in ISO 5053-1:2020, 3.19).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organisations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 16842-10:2020
EN 16842-10:2020 (E)
Introduction
This document is a type-C standard as stated in EN ISO 12100.

This document is of relevance, in particular, for the following stakeholder groups representing the

market players with regard to machinery safety:
— machine manufacturers (small, medium and large enterprises);

— health and safety bodies (regulators, accident prevention organizations, market surveillance etc.).

Others can be affected by the level of machinery safety achieved with the means of the document by the

above-mentioned stakeholder groups:
— machine users/employers (small, medium and large enterprises);

— machine users/employees (e.g. trade unions, organizations for people with special needs);

— service providers, e.g. for maintenance (small, medium and large enterprises);
— consumers (in case of machinery intended for use by consumers).

The above-mentioned stakeholder groups have been given the possibility to participate at the drafting

process of this document.

The machinery concerned and the extent to which hazards, hazardous situations or hazardous events

are covered are indicated in the Scope of this document.

When requirements of this type-C standard are different from those which are stated in type-A or type-

B standards, the requirements of this type-C standard take precedence over the requirements of the

other standards for machines that have been designed and built according to the requirements of this

type-C standard.”
---------------------- Page: 6 ----------------------
SIST EN 16842-10:2020
EN 16842-10:2020 (E)
1 Scope

This document specifies the requirements and test procedures for 360° visibility of sit-on and stand-on

self-propelled

— towing and pushing tractors in accordance with ISO 5053-1:2020, 3.1 and 3.2 without load and

without trailer;
— burden carriers in accordance with ISO 505
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.