SIST EN 62591:2010
(Main)Industrial communication networks - Wireless communication network and communication pofiles - WirelessHART (IEC 62591:2010)
Industrial communication networks - Wireless communication network and communication pofiles - WirelessHART (IEC 62591:2010)
This International Standard specifies an additional Type 20 communication network to IEC 61158-5-20, IEC 61158-6-20 and a Communication Profile CP 9/2 in addition to IEC 61784-1 CPF 9. This standard specifies the following:
- Physical layer service definition and protocol specification,
- Data-link layer service and protocol,
- Application layer service and protocol,
- Network management,
- Security,
- Communication profile,
- Wireless procedures and
- Gateway.
Industrielle Kommunikationsnetze - Kommunikationsnetze und Kommunikationsprofile - WirelessHART (IEC 62591:2010)
Réseaux de communication industrielles - Réseaux de communications sans fil et profils de communication - WirelessHART (CEI 62591:2010)
La CEI 62591:2010 spécifie un réseau de communication type 20 supplémentaire en ajout à la IEC 61158-5-20 et à la IEC 61158-6-20 ainsi qu'un Profil de communication CP 9/2 en ajout à la famille de profils de communications CPF 9 de la IEC 61784-1. La présente norme spécifie ce qui suit:
- Définition de service de la couche physique et spécification de protocole,
- Service et protocole de la couche liaison de données,
- Service et protocole de la couche application,
- Gestion de réseau,
- Sécurité,
- Profil de communication,
- Procédures sans fil et Passerelle. Elle annule et remplace le IEC/PAS 62591 publiée en 2009. Cette première édition constitue une révision technique. La présente version bilingue, publiée en 2011-07 correspond à la version anglaise. La version française de cette norme n'a pas été soumise au vote.
Industrijska komunikacijska omrežja - Brezžično komunikacijsko omrežje in komunikacijski profili - Brezžični HART (IEC 62591:2010)
Ta mednarodni standard določa dodaten tip 20 komunikacijskega omrežja za IEC 61158-5-20 in IEC 61158-6-20 in komunikacijski profil CP 9/2 kot dodatek k IEC 61784-1 CPF 9. Ta standard določa naslednje:
- fizično plast definicije storitve in specifikacije protokola,
- podatkovno povezavo plasti storitve in protokola,
- uporabno povezavo plasti storitve in protokola,
- upravljanje omrežja,
- varnost,
- komunikacijski profil,
- brezžične postopke in
- prehod.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62591:2010
01-september-2010
,QGXVWULMVNDNRPXQLNDFLMVNDRPUHåMD%UH]åLþQRNRPXQLNDFLMVNRRPUHåMHLQ
NRPXQLNDFLMVNLSURILOL%UH]åLþQL+$57 ,(&
Industrial communication networks - Wireless communication network and
communication pofiles - WirelessHART (IEC 62591:2010)
Industrielle Kommunikationsnetze - Kommunikationsnetze und Kommunikationsprofile -
WirelessHART (IEC 62591:2010)
Réseaux de communication industrielles - Réseaux de communications sans fil et profils
de communication - WirelessHART (CEI 62591:2010)
Ta slovenski standard je istoveten z: EN 62591:2010
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62591:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62591:2010
---------------------- Page: 2 ----------------------
SIST EN 62591:2010
EUROPEAN STANDARD
EN 62591
NORME EUROPÉENNE
June 2010
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.05
English version
Industrial communication networks -
Wireless communication network and communication profiles -
WirelessHART™
(IEC 62591:2010)
Réseaux de communication industrielles - Industrielle Kommunikationsnetze -
Réseaux de communications sans fil Kommunikationsnetze
et profils de communication - und Kommunikationsprofile -
WirelessHART™ WirelessHART™
(CEI 62591:2010) (IEC 62591:2010)
This European Standard was approved by CENELEC on 2010-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62591:2010 E
---------------------- Page: 3 ----------------------
SIST EN 62591:2010
EN 62591:2010 - 2 -
Foreword
The text of document 65C/587/FDIS, future edition 1 of IEC 62591, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 62591 on 2010-06-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-03-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-06-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62591:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61158-6-9 NOTE Harmonized as EN 61158-6-9.
__________
---------------------- Page: 4 ----------------------
SIST EN 62591:2010
- 3 - EN 62591:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60559 - Binary floating-point arithmetic for HD 592 S1 -
microprocessor systems
1) 2)
IEC/TR 61158-1 201X Industrial communication networks - Fieldbus CLC/TR 61158-1 201X
specifications -
Part 1: Overview and guidance for the
IEC 61158 and IEC 61784 series
IEC 61158-5-20 2007 Industrial communication networks - Fieldbus EN 61158-5-20 2008
specifications -
Part 5-20: Application layer service definition -
Type 20 elements
IEC 61158-6-20 2007 Industrial communication networks - Fieldbus EN 61158-6-20 2008
specifications -
Part 6-20: Application layer protocol
specification - Type 20 elements
1) 3)
IEC 61784-1 201X Industrial communication networks - Profiles - EN 61784-1 201X
Part 1: Fieldbus profiles
1) 3)
IEC 61784-2 201X Industrial communication networks - Profiles - EN 61784-2 201X
Part 2: Additional fieldbus profiles for real-time
networks based on ISO/IEC 8802-3
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model: The
Basic Model
ISO/IEC 8824 - Information technology - Open Systems - -
Interconnection - Specification of Abstract
Syntax Notation One (ASN.1)
ISO/IEC 8859-1 - Information technology - 8-bit single-byte - -
coded graphic character sets -
Part 1: Latin alphabet No.1
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services
1)
To be published.
2)
To be ratified.
3)
At draft stage.
---------------------- Page: 5 ----------------------
SIST EN 62591:2010
EN 62591:2010 - 4 -
Publication Year Title EN/HD Year
IEEE 802 2001 IEEE standard for local and metropolitan area - -
networks: overview and architecture
IEEE 802.15.4 2006 IEEE Standard for Information technology- - -
Telecommunications and information
exchange between systems- Local and
metropolitan area networks- Specific
requirements
Part 15.4: Wireless Medium Access Control
(MAC) and Physical Layer (PHY)
Specifications for Low-Rate Wireless Personal
Area Networks (WPANs)
---------------------- Page: 6 ----------------------
SIST EN 62591:2010
IEC 62591
®
Edition 1.0 2010-04
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Wireless communication network and
communication profiles – WirelessHART™
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XP
ICS 25.040.40; 35.100.05 ISBN 2-8318-1089-8
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN 62591:2010
– 2 – 62591 © IEC:2010(E)
CONTENTS
FOREWORD.18
INTRODUCTION.20
1 Scope.22
2 Normative references .22
3 Terms, definitions, symbols, abbreviations and conventions .23
3.1 Reference model terms and definitions .23
3.2 Terms and definitions from ISO/IEC 7498-1 terms .24
3.2.1 Terms and definitions from ISO/IEC 9545 .24
3.2.2 Terms and definitions from ISO/IEC 8824 .24
3.2.3 Terms and definitions from ISO/IEC 8825 .24
3.3 Specific terms and definitions .24
3.4 Abbreviations.33
3.5 Conventions .35
3.5.1 Conventions used for service.35
3.5.2 Conventions used for DL-protocol (state machine).36
3.5.3 Conventions for Application Layer service .36
3.5.4 Conventions for the AL-protocol .39
4 Physical layer specification and service definition.44
4.1 Physical layer service definition .44
4.1.1 General overview.44
4.1.2 Physical layer services .44
4.2 Physical layer protocol specification .48
5 Data-link layer service definition – Type 20 elements .48
5.1 Data-link layer services .48
5.1.1 Facilities of the data-link layer services .48
5.1.2 QoS for message service.49
5.1.3 Sequence of primitives .50
5.1.4 DL-TRANSMIT service .52
5.1.5 DL-RECEIVE service .54
5.1.6 DL-DISCONNECT service .55
5.1.7 DL-PATH-FAILURE service .55
5.1.8 DL-ADVERTISE service.55
5.1.9 DL-NEIGHBOR service.56
5.1.10 DLM-SET .56
5.1.11 DLM-GET .57
5.1.12 DLM-ACTION .58
5.1.13 DLM-EVENT.59
5.2 Network layer services.59
5.2.1 Facilities of the network layer services .59
5.2.2 QoS for message service.59
5.2.3 Sequence of primitives .60
5.2.4 NL-TRANSMIT Service.60
5.2.5 NLM-SET .61
5.2.6 NLM-GET .62
5.2.7 NLM-ACTION .63
5.3 Transport layer services .64
---------------------- Page: 8 ----------------------
SIST EN 62591:2010
62591 © IEC:2010(E) – 3 –
5.3.1 Facilities of the transport layer services.64
5.3.2 QoS for message service.64
5.3.3 Sequence of primitives .65
5.3.4 TL-DATA-TRANSFER Service.66
5.3.5 TL-DATA-EXCHANGE Service .68
5.3.6 TLM-SET.69
5.3.7 TLM-GET .70
6 Data-link layer protocol specification – Type 20 elements.71
6.1 Overview .71
6.1.1 Data-link layer operation.71
6.1.2 Network layer operation.74
6.1.3 Device procedures.76
6.2 Logical link control.76
6.2.1 General DLPDU structure .76
6.2.2 DLPDU-specific structure, encoding and elements of procedure .79
6.2.3 DLPDU Priority and Flow Control.84
6.2.4 Error detection and security.85
6.3 Medium Access Control .86
6.3.1 Function .86
6.3.2 Slot timing .87
6.3.3 Communication tables and buffers.89
6.3.4 Link scheduling.95
6.3.5 MAC operation .100
6.4 DL-management-information.112
6.4.1 General .112
6.4.2 DL attributes.112
6.4.3 DLM actions .113
6.5 Network layer .113
6.5.1 Two level model of NL .113
6.5.2 NPDU structure .116
6.5.3 Security function.118
6.5.4 Network layer tables .123
6.5.5 NLE machine.126
6.5.6 NLE elements of procedure .128
6.5.7 NL-management information.131
6.6 Transport layer .133
6.6.1 General .133
6.6.2 TPDU structure.133
6.6.3 Transport pipe table .134
6.6.4 TLE elements of procedure.134
6.6.5 TLE state machines .137
6.6.6 TL-management information .140
7 Application layer service definition – Type 20 elements . 141
7.1 Common concepts .141
7.2 Data type ASE .141
7.2.1 Overview .141
7.2.2 Formal definition of data type objects .143
7.2.3 FAL defined data types.145
7.2.4 Data type ASE service specification .148
---------------------- Page: 9 ----------------------
SIST EN 62591:2010
– 4 – 62591 © IEC:2010(E)
7.2.5 Summary of data types.148
7.3 Communication model specification . 149
7.3.1 Common parameters .149
7.3.2 ASEs .150
7.3.3 ARs .217
7.3.4 Summary of classes .220
7.3.5 Permitted services by AREP role . 220
8 Application layer protocol specification – Type 20 elements .221
8.1 Abstract syntax.221
8.2 Transfer syntax.221
8.2.1 Common APDU fields .221
8.2.2 Common APDU structure.222
8.2.3 Device application service-specific APDU structures . 225
8.2.4 Layer management service specific APDU structures . 249
8.2.5 Gateway and network manager specific APDU structures . 291
8.2.6 Network management configuration specific APDU structures . 303
8.2.7 Data coding rules .319
8.3 Common procedures.324
8.3.1 Delayed response.324
8.3.2 Response time .327
8.4 FAL service protocol machine (FSPM) . 328
8.4.1 General .328
8.4.2 FSPM state tables .328
8.4.3 Functions used by FSPM .330
8.4.4 Parameters of FSPM/ARPM primitives.331
8.5 Application relationship protocol machines (ARPMs). 332
8.5.1 AREP mapping to transport layer. 332
8.5.2 Application relationship protocol machines (ARPMs) . 333
8.5.3 AREP state machine primitive definitions. 335
8.5.4 AREP state machine functions. 336
8.6 TL mapping protocol machine (TMPM). 336
8.6.1 TMPM states .336
8.6.2 TMPM state machines .336
8.6.3 Primitives exchanged between transport layer and TMPM .337
8.6.4 Functions used by TMPM .337
9 Communication Profile Family 9 (HART™) .338
9.1 General Overview .338
9.2 Profile 9/1.338
9.3 Profile 9/2.338
9.3.1 Conformance statement.338
9.3.2 Device types.339
9.3.3 Physical layer .342
9.3.4 Data-link layer .346
9.3.5 Application layer.347
Annex A (normative) Security .355
Annex B (normative) Wireless procedures .368
Annex C (normative) Network management .372
Annex D (normative) Gateway .376
---------------------- Page: 10 ----------------------
SIST EN 62591:2010
62591 © IEC:2010(E) – 5 –
Annex E (normative) Command response codes .381
Annex F (normative) Common tables .390
Annex G (informative) Application of publish data mode and event commands. 404
Annex H (informative) Network redundancy .408
Annex I (informative) Network manager implementation.409
Annex J (informative) Gateway implementation.433
Annex K (informative) Handheld device .444
Bibliography.446
Figure 1 – Superframe class example .41
Figure 2 – Inheritance example.42
Figure 3 – Basic aggregation example .43
Figure 4 – Composition aggregation example .43
Figure 5 – Physical layer service sequences.45
Figure 6 – Message service error-free sequences.51
Figure 7 – Message service sequences with errors .52
Figure 8 – Receive only message service .52
Figure 9 – NLL Data transfer service sequences.60
Figure 10 – Data transfer service error-free sequences.65
Figure 11 – Data transfer service sequences with errors.66
Figure 12 – A TDMA slot and superframe .72
Figure 13 – Channel hopping .73
Figure 14 – Wireless network.75
Figure 15 – DLPDU Structure .76
Figure 16 – Address specifier .76
Figure 17 – Construction of 8-octet EUI-64 Address.78
Figure 18 – DLPDU specifier.78
Figure 19 – Slot timing details.87
Figure 20 – DLE tables and relationship .90
Figure 21 – Relationships used for link scheduling.97
Figure 22 – MAC components .100
Figure 23 – TDMA state machine .102
Figure 24 – XMIT state machine .106
Figure 25 – RECV state machine .109
Figure 26 – ACK transmission state machine .111
Figure 27 – Graph routing.114
Figure 28 – Source routing.115
Figure 29 – NPDU Structure .116
Figure 30 – NPDU control octet .116
Figure 31 – Security control octet .118
Figure 32 – NLE tables and relationship .124
Figure 33 – NLE state machine.127
Figure 34 – Routing decision of the NPDU .130
---------------------- Page: 11 ----------------------
SIST EN 62591:2010
– 6 – 62591 © IEC:2010(E)
Figure 35 – TPDU Structure.133
Figure 36 – TPDU control octet.133
Figure 37 – Transition diagram of the client data transfer state machine . 138
Figure 38 – Transition diagram of the client data exchange state machine. 138
Figure 39 – Transition diagram of the server state machine . 139
Figure 40 – Data t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.