SIST EN ISO 29863:2019

Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018)

This document specifies a series of methods for the determination of the ability of a pressure sensitive tape to remain adhered under a constant load applied parallel to the surfaces of the tape and substrate.
This document contains:
— method A: Self adhesive tapes ? Measurement of shear adhesion to a vertical standard steel panel;
— method B: Self adhesive tapes ? Measurement of shear adhesion to a vertical panel covered with NIST SRM 1810A[1] standard fibreboard;
— method C: Self adhesive tapes ? Measurement of shear adhesion to a vertical panel covered with a fibreboard agreed upon by the buyer and seller;
— method D: Self adhesive tapes ? Measurement of shear adhesion of filament reinforced tape applied to a horizontal standard steel panel;
— method E: Self adhesive tapes ? Measurement of shear adhesion of filament reinforced tape applied to a horizontal panel covered with NIST SRM 1810A1) standard fibreboard;
— method F: Self adhesive tapes ? Measurement of shear adhesion of filament reinforced tape applied to a horizontal panel covered with a fibreboard agreed upon by the buyer and seller;
— method G: Self adhesive tapes ? Measurement of shear adhesion to a vertical standard steel panel at elevated temperature after a 10 min dwell time.
[1] NIST SRM 1810A is National Institute of Standards and Technology ? Standard Reference Material 1810A and is available from the Institute at Gaithersburg, Maryland MD 20899, USA.

Klebebänder - Messung des Scherwiderstandes unter statischer Belastung (ISO 29863:2018)

Dieses Dokument legt eine Reihe von Verfahren fest zur Bestimmung der Fähigkeit druckempfindlicher Klebebänder, sich unter einer konstanten, parallel zur Oberfläche von Klebeband und Träger wirkenden Last nicht abzulösen.
Dieses Dokument beinhaltet:
   Verfahren A: Klebebänder — Messung des Scherwiderstandes auf einer genormten, vertikal angeordneten Prüfplatte aus Stahl;
   Verfahren B: Klebebänder — Messung des Scherwiderstandes auf einer vertikal angeordneten Prüfplatte, die mit einer genormten NIST SRM 1810A  Hartpappe abgedeckt ist;
   Verfahren C: Klebebänder — Messung des Scherwiderstandes auf einer vertikal angeordneten Prüfplatte, die mit einer Hartpappe abgedeckt ist, für die zwischen Käufer und Verkäufer Vereinbarungen getroffen wurden;
   Verfahren D: Klebebänder — Messung des Scherwiderstandes von faserverstärktem Klebeband, das auf eine genormte, horizontal angeordnete Prüfplatte aus Stahl aufgebracht wird;
   Verfahren E: Klebebänder — Messung des Scherwiderstandes von faserverstärktem Klebeband, das auf eine horizontal angeordnete Prüfplatte aufgebracht wird, die mit einer genormten NIST SRM 1810A1-Hartpappe abgedeckt ist;
   Verfahren F: Klebebänder — Messung des Scherwiderstandes von faserverstärktem Klebeband, das auf eine horizontal angeordnete Prüfplatte aufgebracht wird, die mit einer Hartpappe abgedeckt ist, für die zwischen Käufer und Verkäufer Vereinbarungen getroffen wurden;
   Verfahren G: Klebebänder — Messung des Scherwiderstandes auf einer vertikal angeordneten, genormten Prüfplatte aus Stahl bei erhöhter Temperatur nach 10 min Wartezeit.

Rubans auto-adhésifs - Mesurage du pouvoir adhésif tangentiel (ISO 29863:2018)

Le présent document spécifie une série de méthodes permettant de déterminer l'aptitude d'un ruban adhésif sensible à la pression à rester collé sous l'effet d'une charge constante appliquée parallèlement aux surfaces du ruban et du support.
Le présent document contient:
— méthode A: Rubans auto-adhésifs ? Mesure de la résistance au cisaillement statique sur une plaque en acier de référence en position verticale;
— méthode B: Rubans auto-adhésifs ? Mesure de la résistance au cisaillement statique sur une plaque en position verticale revêtue d'un panneau de fibres étalon NIST SRM 1810A[1];
— méthode C: Rubans auto-adhésifs ? Mesure de la résistance au cisaillement statique sur une plaque en position verticale revêtue d'un panneau de fibres de qualité convenue entre l'acheteur et le fournisseur;
— méthode D: Rubans auto-adhésifs ? Mesure de la résistance au cisaillement statique d'un ruban adhésif renforcé par des filaments sur une plaque en acier de référence en position horizontale;
— méthode E: Rubans auto-adhésifs ? Mesure de la résistance au cisaillement statique d'un ruban adhésif renforcé par des filaments sur une plaque en position horizontale revêtue d'un panneau de fibres étalon NIST SRM 1810A1);
— méthode F: Rubans auto-adhésifs ? Mesure de la résistance au cisaillement statique d'un ruban adhésif renforcé par des filaments sur une plaque en position horizontale revêtue d'un panneau de fibres de qualité convenue entre l'acheteur et le fournisseur;
— méthode G: Rubans auto-adhésifs ? Mesure de la résistance au cisaillement statique sur une plaque en acier de référence en position verticale à une température élevée après un temps de fixation de 10 min.
[1] NIST SRM 1810A correspond au matériau de référence normalisé 1810A agréé par le National Institute of Standards and Technology et distribué par l?Institut de Gaithersburg, Maryland MD 20899, États-Unis.

Samolepilni trakovi - Merjenje statične strižne lepljivosti (ISO 29863:2018)

Ta dokument določa vrsto metod za določanje sposobnosti na pritisk občutljivega traku, da ostane prilepljen pod stalno obremenitvijo, ki je vzporedna s površino traku in podlage.
Ta dokument zajema naslednje metode:
– Metoda A: Samolepilni trakovi ? Merjenje strižne lepljivosti na navpični standardni jekleni plošči;
– Metoda B: Samolepilni trakovi ? Merjenje strižne lepljivosti na navpični plošči, prekriti s standardno vlakneno ploščo NIST SRM 1810A[1];
– Metoda C: Samolepilni trakovi ? Merjenje strižne lepljivosti na navpični plošči, prekriti z vlakneno ploščo, za katero sta se dogovorila kupec in prodajalec;
– Metoda D: Samolepilni trakovi ? Merjenje strižne lepljivosti traku, ki je ojačan z nitmi, na vodoravni standardni jekleni plošči;
– Metoda E: Samolepilni trakovi ? Merjenje strižne lepljivosti traku, ki je ojačan z nitmi, na vodoravni plošči, prekriti s standardno vlakneno ploščo NIST SRM 1810A1);
– Metoda F: Samolepilni trakovi ? Merjenje strižne lepljivosti traku, ki je ojačan z nitmi, na vodoravni plošči, prekriti z vlakneno ploščo, za katero sta se dogovorila kupec in prodajalec;
– Metoda G: Samolepilni trakovi ? Merjenje strižne oprijemljivosti na navpični standardni jekleni plošči pri povišani temperaturi 10 minut po prilepljenju.
[1] NIST SRM 1810A je Nacionalni inštitut za standarde in tehnologijo ? Standardno referenčno gradivo 1810A in je na voljo pri Inštitutu v Gaithersburgu, MD 20899 Maryland, ZDA.

General Information

• Status: Published
• Public Enquiry End Date: 28-Feb-2019
• Publication Date: 17-Jun-2019
• ICS: 83.180 - Adhesives
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Jun-2019
• Due Date: 18-Aug-2019
• Completion Date: 18-Jun-2019
• Ref Project: EN ISO 29863:2019 - Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018)

Relations

• Replaces: SIST EN 1943:2003 - Self adhesive tapes - Measurement of static shear adhesion
• Effective Date: 01-Sep-2019
• Replaces: SIST EN 1943:2003 - Self adhesive tapes - Measurement of static shear adhesion
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 29863:2019
01-september-2019
Nadomešča:
SIST EN 1943:2003
Samolepilni trakovi - Merjenje statične strižne lepljivosti (ISO 29863:2018)
Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018)
Klebebänder - Messung des Scherwiderstandes unter statischer Belastung (ISO
29863:2018)
Rubans auto-adhésifs - Mesurage du pouvoir adhésif tangentiel (ISO 29863:2018)
Ta slovenski standard je istoveten z: EN ISO 29863:2019
ICS:
83.180 Lepila Adhesives
SIST EN ISO 29863:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 29863:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 29863:2019


EN ISO 29863
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2019
EUROPÄISCHE NORM
ICS 83.180 Supersedes EN 1943:2002
English Version

Self adhesive tapes - Measurement of static shear adhesion
(ISO 29863:2018)
Rubans auto-adhésifs - Mesurage de la résistance au Klebebänder - Messung des Scherwiderstandes unter
cisaillement statique (ISO 29863:2018) statischer Belastung (ISO 29863:2018)
This European Standard was approved by CEN on 8 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29863:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 29863:2019
EN ISO 29863:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 29863:2019
EN ISO 29863:2019 (E)
European foreword
The text of ISO 29863:2018 has been prepared by Technical Committee ISO/TC 61 "Plastics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 29863:2019 by
Technical Committee CEN/TC 193 “Adhesives” the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards
shall be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1943:2002.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 29863:2018 has been approved by CEN as EN ISO 29863:2019 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 29863:2019

---------------------- Page: 6 ----------------------

SIST EN ISO 29863:2019
INTERNATIONAL ISO
STANDARD 29863
Second edition
2018-05
Self adhesive tapes — Measurement of
static shear adhesion
Rubans auto-adhésifs — Mesurage de la résistance au cisaillement
statique
Reference number
ISO 29863:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------

SIST EN ISO 29863:2019
ISO 29863:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 29863:2019
ISO 29863:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Significance and use . 2
5 Method A: Measurement of shear adhesion to a vertical standard steel panel .2
5.1 Principle . 2
5.2 Materials . 2
5.3 Apparatus . 3
5.3.1 Typical shear adhesion tester . 3
5.3.2 Test piece cutter . 3
5.3.3 Stainless steel panels . 3
5.3.4 Roller mechanically or hand operated . 3
5.4 Test samples and test piece . 4
5.5 Procedure . 4
5.5.1 Standard test conditions . 4
5.5.2 Preparation of the panel . 4
5.5.3 Shear adhesion . 4
5.6 Expression of results . 5
5.7 Test report . 5
6 Method B: Measurement of shear adhesion to a vertical panel covered with NIST
SRM 1810A standard fibreboard . 6
6.1 Principle . 6
6.2 Materials . 6
6.3 Apparatus . 6
6.3.1 Test piece cutter . 6
6.3.2 Suitable panels . 6
6.3.3 Roller mechanically or hand operated . 6
6.3.4 Test stands and ancillary apparatus . 6
6.4 Test samples and test piece . 6
6.5 Procedure . 6
6.5.1 Standard test conditions . 6
6.5.2 Preparation of the panel . 6
6.5.3 Shear adhesion . 7
6.6 Expression of results . 7
6.7 Test report . 7
7 Method C: Measurement of shear adhesion to a vertical panel covered with a
fibreboard agreed upon by the buyer and the seller . 7
7.1 Principle . 7
7.2 Procedure . 7
8 Method D: Measurement of shear adhesion of filament reinforced tape applied to a
horizontal standard steel panel . . 7
8.1 Principle . 7
8.2 Materials . 7
8.3 Apparatus . 8
8.3.1 Test piece cutter . 8
8.3.2 Stainless steel panels . 8
8.3.3 Roller mechanically or hand operated . 8
8.3.4 Test stands and ancillary apparatus . 8
8.4 Test samples and test piece . 8
© ISO 2018 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 29863:2019
ISO 29863:2018(E)

8.5 Procedure . 8
8.5.1 Standard test conditions . 8
8.5.2 Preparation of the panel . 8
8.5.3 Shear adhesion . 8
8.6 Expression of results . 9
8.7 Test report . 9
9 Method E: Measurement of shear adhesion of filament reinforced tape applied to a
horizontal panel covered with NIST SRM 1810A standard fibreboard .10
9.1 Principle .10
9.2 Procedure .10
10 Method F: Measurement of shear adhesion of filament reinforced tape applied to a
horizontal panel covered with a fibreboard agreed upon by the buyer and the seller.10
10.1 Principle .10
10.2 Procedure .10
11 Method G: Measurement of shear adhesion to a vertical standard steel panel at an
elevated temperature after 10 min dwell time .10
11.1 Principle .10
11.2 Procedure .11
Bibliography .14
iv © ISO 2018 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 29863:2019
ISO 29863:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11,
Products.
This second edition cancels and replaces the first edition (ISO 29863:2007) of which it constitutes a
minor revision.
The changes compared to the previous edition are as follows:
— the Introduction has been revised to remove outdated information;
— the normative references in Clause 2 have been updated;
— the definition of “shear adhesion” has been revised and a definition has been added for “self adhesive
tape” in Clause 3;
— a Bibliography has been added;
— the text has been editorially revised to comply with the most recent editing rules.
© ISO 2018 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 29863:2019
ISO 29863:2018(E)

Introduction
This document has been prepared in conjunction with AFERA (International Association for the Self
Adhesive Tape Industry) in Europe and PSTC (Pressure Sensitive Tape Council) in USA.
vi © ISO 2018 – All rights reserved

---------------------- Page: 12 ----------------------

SIST EN ISO 29863:2019
INTERNATIONAL STANDARD ISO 29863:2018(E)
Self adhesive tapes — Measurement of static shear
adhesion
1 Scope
This document specifies a series of methods for the determination of the ability of a pressure sensitive
tape to remain adhered under a constant load applied parallel to the surfaces of the tape and substrate.
This document contains:
— method A: Self adhesive tapes – Measurement of shear adhesion to a vertical standard steel panel;
— method B: Self adhesive tapes – Measurement of shear adhesion to a vertical panel covered with
1)
NIST SRM 1810A standard fibreboard;
— method C: Self adhesive tapes – Measurement of shear adhesion to a vertical panel covered with a
fibreboard agreed upon by the buyer and seller;
— method D: Self adhesive tapes – Measurement of shear adhesion of filament reinforced tape applied
to a horizontal standard steel panel;
— method E: Self adhesive tapes – Measurement of shear adhesion of filament reinforced tape applied
1)
to a horizontal panel covered with NIST SRM 1810A standard fibreboard;
— method F: Self adhesive tapes – Measurement of shear adhesion of filament reinforced tape applied
to a horizontal panel covered with a fibreboard agreed upon by the buyer and seller;
— method G: Self adhesive tapes – Measurement of shear adhesion to a vertical standard steel panel at
elevated temperature after a 10 min dwell time.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12481, Self adhesive tapes — Terminology
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 12481 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http: //www .electropedia .org/
— ISO Online browsing platform: available at https: //www .iso .org/obp
1) NIST SRM 1810A is National Institute of Standards and Technology – Standard Reference Material 1810A and
is available from the Institute at Gaithersburg, Maryland MD 20899, USA.
© ISO 2018 – All rights reserved 1

---------------------- Page: 13 ----------------------

SIST EN ISO 29863:2019
ISO 29863:2018(E)

3.1
shear adhesion
resistance of the pressure sensitive adhesive against shear when static forces are exerted parallel to
the bonding surface
Note 1 to entry: It is expressed as the time to failure under constant load.
3.2
self adhesive tape
pressure sensitive adhesive
adhesive which in a dry state is permanently tacky at room temperature and adheres readily to surfaces
under brief and light pressure
4 Significance and use
These test methods are tools for quality control use. Given specific self adhesive tape and a requirement
in terms of the minimum or maximum value expected for this tape, the data from the test can be used
in conjunction with acceptance criteria.
These methods provide a means of assessing the uniformity of the adhesive of a given type of pressure-
sensitive tape (an example are tapes used for packaging applications). The assessment may be within a
roll of tape, between rolls or production lots.
Variations in the tape backing and adhesive affect the results, therefore, these methods cannot be used
to pinpoint the specific cause(s) of non-uniformity.
These test methods may not provide design information as there is usually no direct relationship
between shear adhesion and any functional requirement.
5 Method A: Measurement of shear adhesion to a vertical standard steel panel
5.1 Principle
Method A measures the shear adhesion of a self adhesive tape to a standard steel panel by its time to
failure at 23 °C and 50 % relative humidity (RH) under constant load.
Shear adhesion to standard steel panel – A strip of tape is applied to a standard steel panel under
controlled roll down. The panel is mounted vertically, a standard mass is attached to the free end of the
tape and the time to failure is determined.
5.2 Materials
5.2.1 Absorbent cleaning material, surgical gauze, cotton wool or tissue. To be suitable, materials
shall be lint free during use, absorbent, contain no additives that are soluble in the solvents listed in 5.2.2
and made exclusively from virgin materials.
5.2.2 One or more of the following solvents:
— diacetone alcohol (4-hydroxy-4-methyl-2-pentanone) non–residual grade;
— methanol;
— methyl ethyl ketone;
— acetone;
— n-heptane;
2 © ISO 2018 – All rights reserved

---------------------- Page: 14 ----------------------

SIST EN ISO 29863:2019
ISO 29863:2018(E)

— a mixture of n-heptane and a fluorinated hydrocarbon such as refrigerant (suitable when toxicity or
flammability restrictions apply).
Solvents shall be of general purpose chemical grade and held in a suitable dispensing system.
5.3 Apparatus
5.3.1 Typical shear adhesion tester
See Figure 1 for a typical shear adhesion tester.
5.3.2 Test piece cutter
A test piece cutter shall hold two single edge razor blades in parallel planes a precise distance apart, to
form a cutter of exact specimen width; two cutters, 12 mm and 24 mm cutting width, shall be available
or appropriate alternatives which will not cause edge damage. The precision of the razor blade
separation shall be the nominal width ±0,1 mm.
5.3.3 Stainless steel panels
These shall be perfectly flat, at least 125 mm long and 50 mm wide and at least 1,1 mm thick, stainless
steel type 1.4301 in accordance with the 2 R quality defined in EN 10088-2, having a bright annealed
finish with a surface roughness of 50 nm ± 25 nm. Panels showing stains, discoloration or many
scratches are not acceptable. New panels shall be cleaned prior to use as described in 5.5.2 except with
ten washes of the final solvent. Between uses the panel test surface shall be protected from scratches
and contamination and the panels shall be stored in the conditions described in 5.5.2.
5.3.4 Roller mechanically or hand operated
5.3.4.1 A steel roller 85 mm ± 2,5 mm in diameter and 45 mm ± 1,5 mm in width, covered with rubber
approximately 6 mm in thickness, having a Shore A durometer hardness of 80 ± 5. The surface shall be a
true cylinder, void of any convex or concave deviations. The mass of the roller shall be 2 kg ± 0,1 kg.
5.3.4.2 No part of the apparatus shall increase the mass of the roller during use. The roller shall move
either mechanically or by hand at the rate of 10 mm/s ± 0,5 mm/s.
5.3.5 Test stands and ancillary apparatus
5.3.5.1 Test stand
A test stand that shall hold the test panel, with tape applied, at an angle between 0° and 2° from the
vertical, so that when the mass is acting on the test specimen, no peel force will be exerted on the tape.
5.3.5.2 Clamps
Clamps that will allow the attachment of the mass to the specimen, distributing the load equally across
the tape specimen width.
5.3.5.3 Test masses
The test mass shall be 1 000 g ± 5 g or other mass as specified. The mass of the clamp described in
5.3.5.2 shall be included as part of the total mass.
© ISO 2018 – All rights reserved 3

---------------------- Page: 15 ----------------------

SIST EN ISO 29863:2019
ISO 29863:2018(E)

5.3.5.4 Timing system
A timing system to measure the interval between the application of the load to the specimen and its
separation from the panel.
5.4 Test samples and test piece
5.4.1 Condition the sample rolls of tape in the standard conditions of 23 °C ± 1 °C and 50 % ± 5 % RH.
Test at these conditions unless otherwise specified [see 5.7 h)].
If these tolerances cannot be maintained, the closest possible tolerances shall be used and these revised
tolerances quoted in the report.
5.4.2 The test requires three test pieces, each shall be 12 mm ± 0,5 mm wide by approximately 150 mm
long. A
...

SLOVENSKI STANDARD
oSIST prEN ISO 29863:2019
01-februar-2019
6DPROHSLOQLWUDNRYL0HUMHQMHVWDWLþQHVWULåQHOHSOMLYRVWL,62
Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018)
Klebebänder - Messung des Scherwiderstandes unter statischer Belastung (ISO
29863:2018)
Rubans auto-adhésifs - Mesurage du pouvoir adhésif tangentiel (ISO 29863:2018)
Ta slovenski standard je istoveten z: prEN ISO 29863
ICS:
83.180 Lepila Adhesives
oSIST prEN ISO 29863:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 29863:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 29863:2019
INTERNATIONAL ISO
STANDARD 29863
Second edition
2018-05
Self adhesive tapes — Measurement of
static shear adhesion
Rubans auto-adhésifs — Mesurage de la résistance au cisaillement
statique
Reference number
ISO 29863:2018(E)
©
ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 29863:2019
ISO 29863:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 29863:2019
ISO 29863:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Significance and use . 2
5 Method A: Measurement of shear adhesion to a vertical standard steel panel .2
5.1 Principle . 2
5.2 Materials . 2
5.3 Apparatus . 3
5.3.1 Typical shear adhesion tester . 3
5.3.2 Test piece cutter . 3
5.3.3 Stainless steel panels . 3
5.3.4 Roller mechanically or hand operated . 3
5.4 Test samples and test piece . 4
5.5 Procedure . 4
5.5.1 Standard test conditions . 4
5.5.2 Preparation of the panel . 4
5.5.3 Shear adhesion . 4
5.6 Expression of results . 5
5.7 Test report . 5
6 Method B: Measurement of shear adhesion to a vertical panel covered with NIST
SRM 1810A standard fibreboard . 6
6.1 Principle . 6
6.2 Materials . 6
6.3 Apparatus . 6
6.3.1 Test piece cutter . 6
6.3.2 Suitable panels . 6
6.3.3 Roller mechanically or hand operated . 6
6.3.4 Test stands and ancillary apparatus . 6
6.4 Test samples and test piece . 6
6.5 Procedure . 6
6.5.1 Standard test conditions . 6
6.5.2 Preparation of the panel . 6
6.5.3 Shear adhesion . 7
6.6 Expression of results . 7
6.7 Test report . 7
7 Method C: Measurement of shear adhesion to a vertical panel covered with a
fibreboard agreed upon by the buyer and the seller . 7
7.1 Principle . 7
7.2 Procedure . 7
8 Method D: Measurement of shear adhesion of filament reinforced tape applied to a
horizontal standard steel panel . . 7
8.1 Principle . 7
8.2 Materials . 7
8.3 Apparatus . 8
8.3.1 Test piece cutter . 8
8.3.2 Stainless steel panels . 8
8.3.3 Roller mechanically or hand operated . 8
8.3.4 Test stands and ancillary apparatus . 8
8.4 Test samples and test piece . 8
© ISO 2018 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 29863:2019
ISO 29863:2018(E)

8.5 Procedure . 8
8.5.1 Standard test conditions . 8
8.5.2 Preparation of the panel . 8
8.5.3 Shear adhesion . 8
8.6 Expression of results . 9
8.7 Test report . 9
9 Method E: Measurement of shear adhesion of filament reinforced tape applied to a
horizontal panel covered with NIST SRM 1810A standard fibreboard .10
9.1 Principle .10
9.2 Procedure .10
10 Method F: Measurement of shear adhesion of filament reinforced tape applied to a
horizontal panel covered with a fibreboard agreed upon by the buyer and the seller.10
10.1 Principle .10
10.2 Procedure .10
11 Method G: Measurement of shear adhesion to a vertical standard steel panel at an
elevated temperature after 10 min dwell time .10
11.1 Principle .10
11.2 Procedure .11
Bibliography .14
iv © ISO 2018 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 29863:2019
ISO 29863:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11,
Products.
This second edition cancels and replaces the first edition (ISO 29863:2007) of which it constitutes a
minor revision.
The changes compared to the previous edition are as follows:
— the Introduction has been revised to remove outdated information;
— the normative references in Clause 2 have been updated;
— the definition of “shear adhesion” has been revised and a definition has been added for “self adhesive
tape” in Clause 3;
— a Bibliography has been added;
— the text has been editorially revised to comply with the most recent editing rules.
© ISO 2018 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 29863:2019
ISO 29863:2018(E)

Introduction
This document has been prepared in conjunction with AFERA (International Association for the Self
Adhesive Tape Industry) in Europe and PSTC (Pressure Sensitive Tape Council) in USA.
vi © ISO 2018 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 29863:2019
INTERNATIONAL STANDARD ISO 29863:2018(E)
Self adhesive tapes — Measurement of static shear
adhesion
1 Scope
This document specifies a series of methods for the determination of the ability of a pressure sensitive
tape to remain adhered under a constant load applied parallel to the surfaces of the tape and substrate.
This document contains:
— method A: Self adhesive tapes – Measurement of shear adhesion to a vertical standard steel panel;
— method B: Self adhesive tapes – Measurement of shear adhesion to a vertical panel covered with
1)
NIST SRM 1810A standard fibreboard;
— method C: Self adhesive tapes – Measurement of shear adhesion to a vertical panel covered with a
fibreboard agreed upon by the buyer and seller;
— method D: Self adhesive tapes – Measurement of shear adhesion of filament reinforced tape applied
to a horizontal standard steel panel;
— method E: Self adhesive tapes – Measurement of shear adhesion of filament reinforced tape applied
1)
to a horizontal panel covered with NIST SRM 1810A standard fibreboard;
— method F: Self adhesive tapes – Measurement of shear adhesion of filament reinforced tape applied
to a horizontal panel covered with a fibreboard agreed upon by the buyer and seller;
— method G: Self adhesive tapes – Measurement of shear adhesion to a vertical standard steel panel at
elevated temperature after a 10 min dwell time.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12481, Self adhesive tapes — Terminology
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 12481 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http: //www .electropedia .org/
— ISO Online browsing platform: available at https: //www .iso .org/obp
1) NIST SRM 1810A is National Institute of Standards and Technology – Standard Reference Material 1810A and
is available from the Institute at Gaithersburg, Maryland MD 20899, USA.
© ISO 2018 – All rights reserved 1

---------------------- Page: 9 ----------------------
oSIST prEN ISO 29863:2019
ISO 29863:2018(E)

3.1
shear adhesion
resistance of the pressure sensitive adhesive against shear when static forces are exerted parallel to
the bonding surface
Note 1 to entry: It is expressed as the time to failure under constant load.
3.2
self adhesive tape
pressure sensitive adhesive
adhesive which in a dry state is permanently tacky at room temperature and adheres readily to surfaces
under brief and light pressure
4 Significance and use
These test methods are tools for quality control use. Given specific self adhesive tape and
...