SIST EN 62040-3:2002/A11:2010

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

Work assigned to TC 22X/WG 4 * The concern is purely European related to the EUP Directive * To be offered to IEC once implemented as A11

Unterbrechungsfreie Stromversorgungssysteme - Teil 3: Methoden zum Festlegen der Leistungs- und Prüfungsanforderungen

Alimentations sans interruption (ASI) - Partie 3: Méthode de spécification des performances et procédures d'essai

Sistemi z neprekinjenim napajanjem - 3. del: Metoda za določanje lastnosti in preskusnih zahtev

Velja za elektronske posredne pretvorniške sisteme za izmenični tok z možnostjo shranjevanja električne energije v enosmerni povezavi. Glavna funkcija sistema z neprekinjenim napajanjem, ki jo zajema ta standard, je zagotavljanje neprekinjenosti izmeničnega toka. Sistem z neprekinjenim napajanjem se lahko uporablja tudi za izboljšanje kakovosti vira energije, tako da ga vzdržuje v okviru določenih lastnosti.

General Information

• Status: Withdrawn
• Publication Date: 15-Dec-2009
• Withdrawal Date: 12-May-2014
• ICS: 29.200 - Rectifiers. Convertors. Stabilized power supply
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-May-2014
• Due Date: 05-Jun-2014
• Completion Date: 13-May-2014
• Directive: 2005/32/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Ref Project: EN 62040-3:2001/A11:2009 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

Relations

• Revised: SIST EN 62040-3:2011 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
• Effective Date: 22-Apr-2014
• Replaced By: SIST EN 62040-3:2011 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
• Effective Date: 07-Jun-2022
• Revised: SIST EN 62040-3:2011 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
• Effective Date: 18-Jun-2010
• Replaced By: SIST EN 62040-3:2011 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
• Effective Date: 28-Jan-2023
• Amends: SIST EN 62040-3:2002 - Uninterruptible power systems (UPS) -- Part 3: Method of specifying the performance and test requirements
• Effective Date: 28-Jan-2023
• Amends: SIST EN 62040-3:2002 - Uninterruptible power systems (UPS) -- Part 3: Method of specifying the performance and test requirements
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62040-3:2002/A11:2010
01-januar-2010
6LVWHPL]QHSUHNLQMHQLPQDSDMDQMHPGHO0HWRGD]DGRORþDQMHODVWQRVWLLQ
SUHVNXVQLK]DKWHY
Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and
test requirements
Unterbrechungsfreie Stromversorgungssysteme - Teil 3: Methoden zum Festlegen der
Leistungs- und Prüfungsanforderungen
Alimentations sans interruption (ASI) - Partie 3: Méthode de spécification des
performances et procédures d'essai
Ta slovenski standard je istoveten z: EN 62040-3:2001/A11:2009
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
SIST EN 62040-3:2002/A11:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62040-3:2002/A11:2010

---------------------- Page: 2 ----------------------

SIST EN 62040-3:2002/A11:2010

EUROPEAN STANDARD
EN 62040-3/A11

NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM

ICS 29.200


English version


Uninterruptible power systems (UPS) -
Part 3: Method of specifying the performance
and test requirements



Alimentations sans interruption (ASI) -  Unterbrechungsfreie
Partie 3: Méthode de spécification Stromversorgungssysteme (USV) -
des performances et procédures d'essai Teil 3: Methoden zum Festlegen
der Leistungs- und
Prüfungsanforderungen




This amendment A11 modifies the European Standard EN 62040-3:2001; it was approved by CENELEC on
2009-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62040-3:2001/A11:2009 E

---------------------- Page: 3 ----------------------

SIST EN 62040-3:2002/A11:2010
EN 62040-3:2001/A11:2009 - 2 -
Foreword
This amendment to the European Standard EN 62040-3:2001 was prepared by the Technical Committee
CENELEC TC 22X, Power electronics.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as
amendment A11 to EN 62040-3:2001 on 2009-09-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-09-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2012-09-01
__________

---------------------- Page: 4 ----------------------

SIST EN 62040-3:2002/A11:2010
- 3 - EN 62040-3:2001/A11:2009
Add the following Annex AA:
Annex AA
(normative)

Methods of efficiency measurement for UPS
AA.1 Introduction
This annex is intended to give the detailed UPS efficiency measuring method and conditions. This method
shall be used also for the efficiency test specified in 6.3.10. The definition of efficiency given in 3.3.19 (ratio
of output active power to input active power under specified conditions with no significant energy transfer to
and from the energy storage means) applies.
AA.2 Measurement conditions
The efficiency measurement shall be carried out as type test (see 3.2.39) under the following conditions:
AA.2.1 Environmental conditions
The environmental conditions shall be within the limits specified in 4.1. The following conditions also apply:
1) ambient temperature between 20 °C to 30 °C;
2) elevation between 0 m and 1 000 m above sea level.
AA.2.2 Operational and electrical conditions
The following conditions apply during the measurement:
1) the UPS shall be in Normal Mode (see 3.2.13);
2) there shall be no significant transfer to and from the energy storage
...