Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table

This European Standard specifies the requirements and/or measures to remove the hazards and limit the risks on single end tenoning machines with sliding table, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings.  This European Standard covers all the hazards relevant to this machine. These  hazards are listed in [clause] 4. This European standard does not cover the hazards related to Electromagnetic compatibility (EMC) as stated in the EMC directive 89/336 EEC dated 03.05.89.  This standard does not apply to :  a) machines where the tenon is produced only by means of saw blades;  b) machines where the design speed of any tool spindle exceeds 6000 min-1;  c) machines where the average sliding table feed speed in either direction exceeds 25 m min-1 + 5%;  d) combined machines used for tenoning (see EN 940 : 1997);  e) tenoning attachments on a vertical spindle moulding machine (see EN 848-1 : 1997).  NOTE : Single and double end tenoning machines fed by chain or chains are dealt with in prEN 1218-2. Single end tenoning machines where the tenon is produced only by means of saw blades are dealt with in prEN 1218-3.  This European Standard is primarily applicable to machines which are manufactured after the date of issue of his standard.

Sicherheit von Holzbearbeitungsmaschinen - Zapfenschneid- und Schlitzmaschinen - Teil 1: Einseitige Zapfenschneid- und Schlitzmaschinen mit Schiebetisch

Diese europäische Norm beschreibt die Anforderungen und/oder Verfahren für die Beseitigung von Gefährdungen und zur Begrenzung der Risiken an einseitigen Zapfenschneid- und Schlitzmaschinen mit Schiebetisch -nachfolgend als "Maschinen" bezeichnet-, die bestimmt sind zum Hobeln von Massivholz, Spanplatten, Faserplatten, Sperrholz sowie diesen Werkstoffen, wenn sie kunststoffbeschichtet oder mit Kunststoffkanten versehen sind.

Sécurité des machines pour le travail du bois - Tenonneuses - Partie 1: Tenonneuses simples a table roulante

La présente norme européenne spécifie les prescriptions et/ou les mesures qui doivent etre prises pour éliminer les phénomenes dangereux et limiter les risques sur les tenonneuses simples a table roulante (désignées ci-apres sous le terme machines) conçues pour usiner du bois, des panneaux de fibres, de particules de contre-plaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de plastique.

Varnost lesnoobdelovalnih strojev - Stroji za izdelovanje čepov in utorov - 1. del: Enostranski stroji s podajalno mizo

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
06-Sep-2009
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Sep-2009
Due Date
30-Sep-2009
Completion Date
07-Sep-2009

Relations

Buy Standard

Standard
EN 1218-1:2000
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1218-1:2000
01-april-2000
9DUQRVWOHVQRREGHORYDOQLKVWURMHY6WURML]DL]GHORYDQMHþHSRYLQXWRURYGHO
(QRVWUDQVNLVWURMLVSRGDMDOQRPL]R
Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning
machines with sliding table
Sicherheit von Holzbearbeitungsmaschinen - Zapfenschneid- und Schlitzmaschinen -
Teil 1: Einseitige Zapfenschneid- und Schlitzmaschinen mit Schiebetisch
Sécurité des machines pour le travail du bois - Tenonneuses - Partie 1: Tenonneuses
simples a table roulante
Ta slovenski standard je istoveten z: EN 1218-1:1999
ICS:
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN 1218-1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 2 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 3 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 4 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 5 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 6 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 7 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 8 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 9 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 10 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 11 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 12 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 13 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 14 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 15 ----------------------

SIST EN 1218-1:2000

---------------------- Page: 16 ----------------------

SIST EN 1218-1:2000

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.