iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 575:1998

(Main)

Aluminium and aluminium alloys - Master alloys produced by melting - Specifications

Aluminium and aluminium alloys - Master alloys produced by melting - Specifications

This European Standard specifies the requirements for grades of master alloys produced by melting and intended for addition to a melt to adjust composition and/or to control impurities and/or to control the as-cast structure. It specifies the classification and designation applicable to these grades, the conditions in which they are produced, their properties and the marks by which they are identified.

Aluminium und Aluminiumlegierungen - Vorlegierungen durch Erschmelzen hergestellt - Spezifikationen

Diese Europäische Norm legt die Anforderungen an verschiedene Sorten von Vorlegierugen fest, die durch Erschmelzen hergestellt wurden und zur Schmelze hinzugefügt werden sollen, um die Zusammensetzung einzustellen und/oder die Verunreinigungen zu begrenzen und/oder die Gußstruktur zu beeinflussen. Sie legt die Klassifizierung und Bezeichnung für diese Sorten, ihre Herstellungsbedingungen, ihre Eigenschaften sowie die Kennzeichnungen zur Identifizierung fest.

Aluminium et alliages d'aluminium - Alliages meres obtenus par fusion - Spécifications

La présente norme européenne spécifie les caractéristiques des nuances d'alliages meres obtenues par fusion destinés a etre ajoutés a la charge pour en ajuster la composition, et/ou en contrôler les impuretés et/ou en contrôler la structure brute de coulée. Elle spécifie la classification et la désignationde ces nuances, leurs conditions de production, leurs propriétés et leurs marques d'identification.

Aluminij in aluminijeve zlitine - Predzlitine, izdelane s taljenjem - Specifikacije

General Information

Status
Published
Publication Date
31-Mar-1998
ICS
77.120.10 - Aluminium and aluminium alloys
Technical Committee
INEK - Nonferrous metals
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-1998
Due Date
01-Apr-1998
Completion Date
01-Apr-1998
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 575:1995 - Aluminium and aluminium alloys - Master alloys produced by melting - Specifications

Buy Standard

EN 575:1998EN 575:1998
PreviousNext
Standard
EN 575:1998
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 575:1998
01-april-1998
Aluminij in aluminijeve zlitine - Predzlitine, izdelane s taljenjem - Specifikacije
Aluminium and aluminium alloys - Master alloys produced by melting - Specifications
Aluminium und Aluminiumlegierungen - Vorlegierungen durch Erschmelzen hergestellt -
Spezifikationen
Aluminium et alliages d'aluminium - Alliages meres obtenus par fusion - Spécifications
Ta slovenski standard je istoveten z: EN 575:1995
ICS:
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN 575:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 575:1998

---------------------- Page: 2 ----------------------

SIST EN 575:1998

---------------------- Page: 3 ------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14242:2023(Main)
Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis
EN 14242:2023

This European Standard describes detailed steps for dissolution and preparation of calibration solutions. The pre-ferred use is for certification and referee analysis. All instrumentation, including software used in the testing labo-ratories, are different an subject to change. Therefore, general criteria for calibration and measurement are speci-fied.
This method has to be used with primary reference materials whose mass of substance have a significant smaller uncertainty as required of the repeatability of the testing procedure.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 573-3:2019+A1:2022(Main)
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-3:2019+A1:2022

This document specifies the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
NOTE The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with those registered with the Aluminium Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, for the corresponding alloys.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7668:2021(Main)
Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° (ISO 7668:2021)
EN ISO 7668:2021

This document specifies methods for the measurement of specular reflectance and specular gloss of
flat samples of anodized aluminium using geometries of 20° (Method A), 45° (Method B), 60° (Method
C) and 85° (Method D) and of specular reflectance by an additional 45° method (Method E) employing a
narrow acceptance angle.
The methods described are intended mainly for use with clear anodized surfaces. They can be used
with colour-anodized aluminium, but only with similar colours.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18771:2020(Main)
Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019)
EN ISO 18771:2020

This document specifies a method for the determination of the surface abrasion resistance of anodic oxidation coatings produced by sulfuric acid anodizing of aluminium and its alloys. It is mainly intended for the evaluation of external architectural coatings. It is a production control method that relies to a large extent on operator experience and instruction.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2106:2020(Main)
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
EN ISO 2106:2020

This document specifies a gravimetric method for determining the mass per unit area(surface density) of anodic oxidation coatings on aluminium and its alloys. Themethod is applicable to all oxidation coatings formed by anodizing aluminium andits alloys, either cast or wrought, and is suitable for most aluminium alloys,except those in which the mass fraction of copper is greater than 6 %.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2376:2019(Main)
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
EN ISO 2376:2019

This document specifies test methods for the determination of the breakdown voltage and withstand
voltage of anodic oxidation coatings on aluminium and its alloys, on flat or near-flat surfaces and on
round wire. The methods are applicable to anodic oxidation coatings used primarily as electrical
insulators.
The methods are not applicable to coatings in the vicinity of cut edges, the edges of holes, or sharp
changes of angle on, for example, extruded shapes.
NOTE 1 Breakdown voltage and withstand voltage are affected by relative humidity.
NOTE 2 The methods described do not give satisfactory results for unsealed coatings because they are
affected by the humidity in particular.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14726:2019(Main)
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
EN 14726:2019

This document describes the criteria and operation procedure for carrying out spark optical emission spectrometry (S-OES) on metal samples. The scope of this standard covers the following:
-   sample preparation;
-   operational guidelines for an optical emission spectrometer (including self-maintenance);
-   traceability of the analytical results to the international base units — mass (kg);
-   assessing the uncertainty associated with each analytical result.
This document refers to simultaneous spark emission spectrometers for the analysis of solid samples.
It applies to the determination of silicon, iron, copper, manganese, magnesium, chromium, nickel, zinc, titanium, boron, gallium, vanadium, beryllium, bismuth, calcium, cadmium, cobalt, lithium, sodium, phosphorus, lead, antimony, tin, strontium and zirconium in aluminium and aluminium alloys.
Elements other than those listed above may be analysed on the condition that:
a)   suitable reference materials are available; and
b)   the instrument is suitably calibrated and equipped.
In the case of determining mercury, for compliance purposes an alternate method with a limit of quantification < 0,000 1 % is recommended as its detection is compromised by intense iron interference at 253,65 nm.
The test result obtained from a spark optical emission spectrometer generally uses a sampling mass of less than one milligram per spark spot. The result can be used to refer to the laboratory test sample, to the aluminium or aluminium alloy melt or to the cast product.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8994:2019(Main)
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
EN ISO 8994:2018

This document specifies a grid rating system that provides a means of defining levels of performance of
anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests.
This rating system is applicable to pitting corrosion resulting from
— accelerated tests,
— exposure to corrosive environments, and
— practical service tests.
This document takes into account only pitting corrosion of the basis metal resulting from penetration
of the protective anodic oxidation coating.
NOTE 1 ISO 8993[1] describes a similar rating system based on defined chart scales.
NOTE 2 The grid rating system is frequently used for rating the results of short-term corrosion tests for
relatively thin anodic oxidation coating, such as those used in the automotive industry.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3211:2019(Main)
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
EN ISO 3211:2018

This document specifies an empirical method for assessing the resistance of anodic oxidation coatings
to cracking by deformation.
The method is applicable particularly to sheet material with anodic oxidation coatings of thickness less
than 5 μm, and is useful for development purposes.
NOTE If the test specimen is thick, more than 5 μm of coating can be measured (see Clause 9).

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2085:2018(Main)
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
EN ISO 2085:2018

This document specifies a method for checking the continuity of thin anodic oxidation coatings on
aluminium and its alloys by a copper sulfate contact test.
The use of this method is limited to anodic oxidation coatings of thickness less than 5 μm or coatings
that have been deformed, which includes those produced by coil anodizing techniques.
NOTE The method described enables a rapid check to be made for the continuity of a thin coating of
aluminium oxidation on aluminium and its alloys. In cases of doubt regarding a visible fault on the surface of
a coating, the use of this method makes it possible to verify whether the fault corresponds to a local gap in the
coating that exposes bare metal.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day