iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 683-2:2024/AC:2025

(Corrigendum)

Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties

Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

Aluminium und Aluminiumlegierungen - Vormaterial für Wärmeaustauscher (Finstock) - Teil 2: Mechanische Eigenschaften

Aluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 2 : Caractéristiques mécaniques

Le présent document spécifie les caractéristiques mécaniques des bandes pour échangeurs thermiques en aluminium et alliages d'aluminium corroyés.
Les limites de la composition chimique de ces matériaux sont données dans l‘EN 573-3, sauf accord contraire entre le fournisseur et l’acheteur.
La désignation de l'aluminium et des alliages d'aluminium, ainsi que la désignation des états métallurgiques utilisées dans le présent document sont spécifiées dans l'EN 573-3 et la désignation des états métallurgiques est définie dans l'EN 515.

Aluminij in aluminijeve zlitine - Hladno valjani polizdelki za toplotne izmenjevalnike - 2. del: Mehanske lastnosti - Popravek AC

General Information

Status
Published
Publication Date
30-Jan-2025
ICS
77.120.10 - Aluminium and aluminium alloys
77.150.10 - Aluminium products
Technical Committee
INEK - Nonferrous metals
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
28-Jan-2025
Due Date
04-Apr-2025
Completion Date
31-Jan-2025
Ref Project
EN 683-2:2024/AC:2025 - Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties

Relations

Corrects
SIST EN 683-2:2024 - Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
Effective Date
20-Nov-2024

Buy Standard

EN 683-2:2024/AC:2025EN 683-2:2024/AC:2025
PreviousNext
Corrigendum
EN 683-2:2024/AC:2025
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2025
Aluminij in aluminijeve zlitine - Hladno valjani polizdelki za toplotne izmenjevalnike
- 2. del: Mehanske lastnosti - Popravek AC
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
Aluminium und Aluminiumlegierungen - Vormaterial für Wärmeaustauscher (Finstock) -
Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 2 :
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: EN 683-2:2024/AC:2025
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 683-2:2024/AC

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2025
ICS 77.120.10
English version
Aluminium and alum
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
EN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573-3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573-3, and the temper designations are defined in EN 515.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 573-3:2019+A2:2024(Main)
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-3:2019+A2:2023

This document specifies the chemical composition limits of wrought aluminium and wrought
aluminium alloys and form of products.
NOTE The chemical composition limits of aluminium and aluminium alloys specified herein are completely
identical with those registered with the Aluminium Association, 1525, Wilson Boulevard, Suite 600, Arlington,
VA 22209, USA, for the corresponding alloys.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 573-3:2019+A1:2022/oprA2:2023(Amendment)
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-3:2019+A1:2022/prA2

This document specifies the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
NOTE The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with those registered with the Aluminium Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, for the corresponding alloys.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 573-3:2019/oprA1:2021(Amendment)
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-3:2019/FprA1

This document specifies the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
NOTE The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with those registered with the Aluminium Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, for the corresponding alloys.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
EN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573-3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573-3, and the temper designations are defined in EN 515.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 573-3:2019+A2:2024(Main)
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-3:2019+A2:2023

This document specifies the chemical composition limits of wrought aluminium and wrought
aluminium alloys and form of products.
NOTE The chemical composition limits of aluminium and aluminium alloys specified herein are completely
identical with those registered with the Aluminium Association, 1525, Wilson Boulevard, Suite 600, Arlington,
VA 22209, USA, for the corresponding alloys.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 573-3:2019+A1:2022/oprA2:2023(Amendment)
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-3:2019+A1:2022/prA2

This document specifies the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
NOTE The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with those registered with the Aluminium Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, for the corresponding alloys.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 573-3:2019/oprA1:2021(Amendment)
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-3:2019/FprA1

This document specifies the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
NOTE The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with those registered with the Aluminium Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, for the corresponding alloys.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62309:2025(Main)
Dependability of new products containing reused parts and life-extended products (IEC 62309:2024)
EN IEC 62309:2025

IEC 62309:2024 introduces the concept to check the reliability and functionality of reused parts and their usage within new products. It also provides information and criteria about the assurance [for example, testing and analysis, required for products containing reused parts, which are declared "qualified-as-good-as-new" (QAGAN)] relative to the designed life of the product.
This document specifies requirements to be satisfied before making a declaration or applying a designation of QAGAN. This document also gives guidance to support any organisation that makes declarations about dependability of products containing reused parts.
In this document, the term "product" covers electrical, electro-mechanical, mechanical parts or hardware that can contain software.
"Qualified-as-good-as-new" (QAGAN) does not apply to reused materials or large structures and large systems, nor does it cover software products, concepts, and ideas.
The purpose of this document is to ensure by tests and analysis that the reliability and functionality of a new product containing reused parts is comparable to a product that contains only new parts. This would justify the manufacturer granting the next customer the full warranty of the product with "qualified-as-good-as-new" (QAGAN) parts.
Annex A describes extending useful life by refurbishment, updating, upgrading, maintenance and used as second-hand. These concepts are defined and the requirements for using the term with reference to this document are stated.
This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the previous Annex A has been separated into Annex B (Dependability aspects) and Annex C (Example with QAGAN parts);
b) a new normative Annex A has been written with expansion of lifecycle activities, to describe extending the useful life by refurbishment, life extension, updating, upgrading and second-hand use;
c) revision of Figure 1 accordingly;
d) minor editorial alignments throughout the document;
e) the abbreviation "quagan" has been changed "QAGAN" to reflect more contemporary use.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5530-2:2025(Main)
Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2025)
EN ISO 5530-2:2025

This document specifies a method using an extensograph for the determination of the rheological properties of wheat flour doughs in an extension test. The recorded load–extension curve is used to assess the general quality of flour and its response to improving agents.
The method is applicable to experimental and commercial flours from wheat (Triticum aestivum L.).
NOTE 1        This document is related to ICC 114[5] and AACC Method 54-10[6].
NOTE 2        For dough preparation, a farinograph is used (see 6.2)

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day