SIST EN ISO/IEC 19896-1:2023
(Main)IT security techniques - Competence requirements for information security testers and evaluators - Part 1: Introduction, concepts and general requirements (ISO/IEC 19896-1:2018)
IT security techniques - Competence requirements for information security testers and evaluators - Part 1: Introduction, concepts and general requirements (ISO/IEC 19896-1:2018)
This document defines terms and establishes an organized set of concepts and relationships to
understand the competency requirements for information security assurance conformance-testing
and evaluation specialists, thereby establishing a basis for shared understanding of the concepts and
principles central to the ISO/IEC 19896 series across its user communities. It provides fundamental
information to users of the ISO/IEC 19896 series
IT-Sicherheitstechniken - Kompetenzanforderungen an Tester und Evaluatoren von Informationssicherheit - Teil 1: Einführung, Konzepte und allgemeine Anforderungen (ISO/IEC 19896-1:2018)
Dieses Dokument legt Begriffe fest und bietet eine übersichtliche Zusammenstellung von Konzepten und Beziehungen
zum Verständnis der Kompetenzanforderungen an Spezialisten zur Konformitätsprüfung und Evaluierung
der Vertrauenswürdigkeit der Informationssicherheit. Damit wird die Grundlage für ein gemeinsames
Verständnis der Konzepte und Grundsätze geschaffen, die für die Normenreihe ISO/IEC 19896 in den verschiedenen
Benutzergemeinschaften von zentraler Bedeutung sind. Es bietet grundlegende Informationen für Nutzer
der Normenreihe ISO/IEC 19896.
Techniques de sécurité IT - Exigences de compétence pour l'information testeurs d'assurance et les évaluateurs - Partie 1: Introduction, concepts et exigences générales (ISO/IEC 19896-1:2018)
Le présent document définit les termes et établit un ensemble structuré de concepts et leurs relations pour comprendre les exigences de compétences des spécialistes des essais de conformité et de l'évaluation pour l'assurance de la sécurité de l'information, établissant ainsi la base d'une compréhension partagée des concepts et des principes centraux de la série ISO/IEC 19896 à travers ses communautés d'utilisateurs. Il fournit des informations fondamentales aux utilisateurs de la série ISO/IEC 19896.
Varnostne tehnike IT - Zahteve za usposobljenost za preskuševalce in ocenjevalce informacijske varnosti - 1. del: Uvod, pojmi in splošne zahteve (ISO/IEC 19896-1:2018)
Ta dokument opredeljuje izraze in določa organiziran sklop konceptov in razmerij za razumevanje zahtev za usposobljenost strokovnjakov s področja zagotavljanja informacijske varnosti, preskušanja skladnosti in ovrednotenja, in s tem vzpostavlja podlago za skupno razumevanje ključnih konceptov in načel skupine standardov ISO/IEC 19896 v vseh zadevnih uporabniških skupinah. Uporabnikom skupine standardov ISO/IEC 19896 zagotavlja temeljne informacije.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO/IEC 19896-1:2023
01-maj-2023
Varnostne tehnike IT - Zahteve za usposobljenost za preskuševalce in ocenjevalce
informacijske varnosti - 1. del: Uvod, pojmi in splošne zahteve (ISO/IEC 19896-
1:2018)
IT security techniques - Competence requirements for information security testers and
evaluators - Part 1: Introduction, concepts and general requirements (ISO/IEC 19896-
1:2018)
IT-Sicherheitstechniken - Kompetenzanforderungen an Tester und Evaluatoren von
Informationssicherheit - Teil 1: Einführung, Konzepte und allgemeine Anforderungen
(ISO/IEC 19896-1:2018)
Techniques de sécurité IT - Exigences de compétence pour l'information testeurs
d'assurance et les évaluateurs - Partie 1: Introduction, concepts et exigences générales
(ISO/IEC 19896-1:2018)
Ta slovenski standard je istoveten z: EN ISO/IEC 19896-1:2023
ICS:
03.100.30 Vodenje ljudi Management of human
resources
35.030 Informacijska varnost IT Security
SIST EN ISO/IEC 19896-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO/IEC 19896-1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO/IEC 19896-1:2023
EUROPEAN STANDARD EN ISO/IEC 19896-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2023
ICS 35.030
English version
IT security techniques - Competence requirements for
information security testers and evaluators - Part 1:
Introduction, concepts and general requirements (ISO/IEC
19896-1:2018)
Techniques de sécurité IT - Exigences de compétence IT-Sicherheitstechniken - Kompetenzanforderungen an
pour l'information testeurs d'assurance et les Tester und Evaluatoren von Informationssicherheit -
évaluateurs - Partie 1: Introduction, concepts et Teil 1: Einführung, Konzepte und allgemeine
exigences générales (ISO/IEC 19896-1:2018) Anforderungen (ISO/IEC 19896-1:2018)
This European Standard was approved by CEN on 9 January 2023.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2023 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. EN ISO/IEC 19896-1:2023 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
SIST EN ISO/IEC 19896-1:2023
EN ISO/IEC 19896-1:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO/IEC 19896-1:2023
EN ISO/IEC 19896-1:2023 (E)
European foreword
The text of ISO/IEC 19896-1:2018 has been prepared by Technical Committee ISO/IEC JTC 1
"Information technology” of the International Organization for Standardization (ISO) and has been
taken over as EN ISO/IEC 19896-1:2023 by Technical Committee CEN-CENELEC/ JTC 13 “Cybersecurity
and Data Protection” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2023, and conflicting national standards shall be
withdrawn at the latest by July 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN-CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN and CENELEC websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/IEC 19896-1:2018 has been approved by CEN-CENELEC as EN ISO/IEC 19896-1:2023
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO/IEC 19896-1:2023
---------------------- Page: 6 ----------------------
SIST EN ISO/IEC 19896-1:2023
INTERNATIONAL ISO/IEC
STANDARD 19896-1
First edition
2018-02
IT security techniques — Competence
requirements for information security
testers and evaluators —
Part 1:
Introduction, concepts and general
requirements
Techniques de sécurité IT — Exigences de compétence pour
l'information testeurs d'assurance et les évaluateurs —
Partie 1: Introduction, concepts et exigences générales
Reference number
ISO/IEC 19896-1:2018(E)
©
ISO/IEC 2018
---------------------- Page: 7 ----------------------
SIST EN ISO/IEC 19896-1:2023
ISO/IEC 19896-1:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO/IEC 19896-1:2023
ISO/IEC 19896-1:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Concepts . 2
5 Elements of competence . 3
5.1 Competences . 3
5.2 Knowledge . 3
5.3 Skills . 4
5.4 Experience . 4
5.5 Education . 5
5.6 Effectiveness . 5
6 Competency levels . 5
6.1 General . 5
6.2 Level 1 (Associate) . 5
6.3 Level 2 (Professional) . 5
6.4 Level 3 (Manager) . 5
6.5 Level 4 (Principal) . 6
7 Measurement of elements of competence . 6
7.1 Knowledge . 6
7.2 Skills . 6
7.3 Experience . 6
7.4 Education . 6
7.5 Effectiveness . 7
7.6 Recording elements of competence . 7
Annex A (informative) Framework for describing competence requirements .8
Annex B (informative) Example records of experience and competence .10
Bibliography .11
© ISO/IEC 2018 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO/IEC 19896-1:2023
ISO/IEC 19896-1:2018(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 27, IT Security techniques.
A list of all parts in the ISO/IEC 19896 series can be found on the ISO website.
iv © ISO/IEC 2018 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO/IEC 19896-1:2023
ISO/IEC 19896-1:2018(E)
Introduction
The objective of the ISO/IEC 19896 series is to provide the fundamental concepts related to the topic
of the competence of the individuals responsible for performing IT product security evaluations
and conformance testing. The ISO/IEC 19896 series provides the framework and the specialized
requirements that specify the minimum competence of individuals performing IT product security
evaluations and conformance testing using established standards.
In pursuit of this objective, the ISO/IEC 19896 series comprises the following:
a) The terms and definitions relating to the topic of competence in IT product security evaluators and
testers;
b) The fundamental concepts relating to competence in IT product security evaluations and
conformance testing; and
c) The minimum competence requirements for IT product security evaluators and testers to conduct
IT product testing/evaluation.
The ISO/IEC 19896 series is of interest to:
a) Information security evaluation and conformance-testing specialists;
b) Information security evaluation and conformance-testing approval authorities;
c) Information security evaluation and conformance-testing laboratories;
d) Vendors or technology providers whose IT products can be the subject of information security
assurance evaluations or conformance-testing;
e) Organizations offering professional credentials or recognitions.
The ISO/IEC 19896 series is organized in parts to address the competence of evaluation and testing
professionals as follows.
In this document, the introduction and concepts, provides an overview of the definitions, fundamental
concepts and a general description of the framework used to communicate the competence requirements
for certain specialized areas. This material is aimed at providing the fundamental knowledge necessary
to use the framework presented in the other parts of the ISO/IEC 19896 series appropriately.
ISO/IEC 19896-2 describes the minimum set of competence requirements at each competency level for
conformance testers working with ISO/IEC 19790 and associated standards.
ISO/IEC 19896-3 describes the minimum set of competence requirements at each competency level for
information security evaluators working with ISO/IEC 15408 (all parts) and associated standards.
© ISO/IEC 2018 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO/IEC 19896-1:2023
---------------------- Page: 12 ----------------------
SIST EN ISO/IEC 19896-1:2023
INTERNATIONAL STANDARD ISO/IEC 19896-1:2018(E)
IT security techniques — Competence requirements for
information security testers and evaluators —
Part 1:
Introduction, concepts and general requirements
1 Scope
This document defines terms and establishes an organized set of concepts and relationships to
understand the competency requirements for information security assurance conformance-testing
and evaluation specialists, thereby establishing a basis for shared understanding of the concepts and
principles central to the ISO/IEC 19896 series across its user communities. It provides fundamental
information to users of the ISO/IEC 19896 series.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 17000, Conformity assessment — Vocabulary and general principles
ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/IEC 17000, ISO/IEC 17025
and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
competence
ability to apply knowledge
...
SLOVENSKI STANDARD
oSIST prEN ISO/IEC 19896-1:2022
01-november-2022
IT varnostne tehnike - Zahteve za usposobljenost za preskuševalce in ocenjevalce
informacijske varnosti - 1. del: Uvod, pojmi in splošne zahteve (ISO/IEC 19896-
1:2018)
IT security techniques - Competence requirements for information security testers and
evaluators - Part 1: Introduction, concepts and general requirements (ISO/IEC 19896-
1:2018)
IT-Sicherheitstechniken - Kompetenzanforderungen an Tester und Evaluatoren von
Informationssicherheit - Teil 1: Einführung, Konzepte und allgemeine Anforderungen
(ISO/IEC 19896‑1:2018)
Techniques de sécurité IT - Exigences de compétence pour l'information testeurs
d'assurance et les évaluateurs - Partie 1: Introduction, concepts et exigences générales
(ISO/IEC 19896-1:2018)
Ta slovenski standard je istoveten z: prEN ISO/IEC 19896-1
ICS:
03.100.30 Vodenje ljudi Management of human
resources
35.030 Informacijska varnost IT Security
oSIST prEN ISO/IEC 19896-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO/IEC 19896-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO/IEC 19896-1:2022
INTERNATIONAL ISO/IEC
STANDARD 19896-1
First edition
2018-02
IT security techniques — Competence
requirements for information security
testers and evaluators —
Part 1:
Introduction, concepts and general
requirements
Techniques de sécurité IT — Exigences de compétence pour
l'information testeurs d'assurance et les évaluateurs —
Partie 1: Introduction, concepts et exigences générales
Reference number
ISO/IEC 19896-1:2018(E)
©
ISO/IEC 2018
---------------------- Page: 3 ----------------------
oSIST prEN ISO/IEC 19896-1:2022
ISO/IEC 19896-1:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO/IEC 19896-1:2022
ISO/IEC 19896-1:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Concepts . 2
5 Elements of competence . 3
5.1 Competences . 3
5.2 Knowledge . 3
5.3 Skills . 4
5.4 Experience . 4
5.5 Education . 5
5.6 Effectiveness . 5
6 Competency levels . 5
6.1 General . 5
6.2 Level 1 (Associate) . 5
6.3 Level 2 (Professional) . 5
6.4 Level 3 (Manager) . 5
6.5 Level 4 (Principal) . 6
7 Measurement of elements of competence . 6
7.1 Knowledge . 6
7.2 Skills . 6
7.3 Experience . 6
7.4 Education . 6
7.5 Effectiveness . 7
7.6 Recording elements of competence . 7
Annex A (informative) Framework for describing competence requirements .8
Annex B (informative) Example records of experience and competence .10
Bibliography .11
© ISO/IEC 2018 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO/IEC 19896-1:2022
ISO/IEC 19896-1:2018(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 27, IT Security techniques.
A list of all parts in the ISO/IEC 19896 series can be found on the ISO website.
iv © ISO/IEC 2018 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO/IEC 19896-1:2022
ISO/IEC 19896-1:2018(E)
Introduction
The objective of the ISO/IEC 19896 series is to provide the fundamental concepts related to the topic
of the competence of the individuals responsible for performing IT product security evaluations
and conformance testing. The ISO/IEC 19896 series provides the framework and the specialized
requirements that specify the minimum competence of individuals performing IT product security
evaluations and conformance testing using established standards.
In pursuit of this objective, the ISO/IEC 19896 series comprises the following:
a) The terms and definitions relating to the topic of competence in IT product security evaluators and
testers;
b) The fundamental concepts relating to competence in IT product security evaluations and
conformance testing; and
c) The minimum competence requirements for IT product security evaluators and testers to conduct
IT product testing/evaluation.
The ISO/IEC 19896 series is of interest to:
a) Information security evaluation and conformance-testing specialists;
b) Information security evaluation and conformance-testing approval authorities;
c) Information security evaluation and conformance-testing laboratories;
d) Vendors or technology providers whose IT products can be the subject of information security
assurance evaluations or conformance-testing;
e) Organizations offering professional credentials or recognitions.
The ISO/IEC 19896 series is organized in parts to address the competence of evaluation and testing
professionals as follows.
In this document, the introduction and concepts, provides an overview of the definitions, fundamental
concepts and a general description of the framework used to communicate the competence requirements
for certain specialized areas. This material is aimed at providing the fundamental knowledge necessary
to use the framework presented in the other parts of the ISO/IEC 19896 series appropriately.
ISO/IEC 19896-2 describes the minimum set of competence requirements at each competency level for
conformance testers working with ISO/IEC 19790 and associated standards.
ISO/IEC 19896-3 describes the minimum set of competence requirements at each competency level for
information security evaluators working with ISO/IEC 15408 (all parts) and associated standards.
© ISO/IEC 2018 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO/IEC 19896-1:2022
---------------------- Page: 8 ----------------------
oSIST prEN ISO/IEC 19896-1:2022
INTERNATIONAL STANDARD ISO/IEC 19896-1:2018(E)
IT security techniques — Competence requirements for
information security testers and evaluators —
Part 1:
Introduction, concepts and general requirements
1 Scope
This document defines terms and establishes an organized set of concepts and relationships to
understand the competency requirements for information security assurance conformance-testing
and evaluation specialists, thereby establishing a basis for shared understanding of the concepts and
principles central to the ISO/IEC 19896 series across its user communities. It provides fundamental
information to users of the ISO/IEC 19896 series.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 17000, Conformity assessment — Vocabulary and general principles
ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/IEC 17000, ISO/IEC 17025
and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
competence
ability to apply knowledge and skills to achieve intended results
[SOURCE: ISO/IEC 17024:2012, 3.6]
3.2
conformance-tester
tester
individual assigned to perform test activities in accordance with a given conformance testing standard
and associated testing methodology
Note 1 to entry: An example of such a standard is ISO/IEC 19790 and the testing methodology specified in
ISO/IEC 24759.
3.3
education
process of receiving or giving systematic instruction, especially at a school or university
© ISO/IEC 2018 – All rights reserved 1
---------------------- Page: 9 ----------------------
oSIST prEN ISO/IEC 19896-1:2022
ISO/IEC 19896-1:2018(E)
3.4
effectiveness
ability to apply knowledge and skills in a productive manner, characterized by attributes of behaviour
such as aptitude, initiative, enthusiasm, willingness, communication skills, team participation, and
leadership
3.5
evaluator
individual assigned to perform evaluations in accordance with a given evaluation standard and
associated evaluation methodology
Note 1 to entry: An example of evaluation standards is ISO/IEC 15408 (all parts) with the associated evaluation
methodology given in ISO/IEC 18045.
3.6
experience
involvement at a practical level with projects related to the field of competence
3.7
knowledge
facts, information, truths, principles or understanding acquired through experience or education
Note 1 to entry: An example of knowledge is the ability to describe the various parts of an information assurance
standard.
[SOURCE: ISO/IEC TS 17027:2014, 2.56, modified — Note 1 to entry has been added.]
3.8
laboratory
organization with a management system providing evaluation and or testing work in accordance with a
defined set of policies and procedures and utilizing a defined methodology for testing or evaluating the
security functionality of IT products
Note 1 to entry: These organizations are often given alternative names by various approval authorities. For
example, IT Security Evaluation Facility (ITSEF), Common Criteria Testing Laboratory (CCTL), Commercial
Evaluation Facility (CLEF).
3.9
skill
ability to perform a task or activity with a specific intended outcome acquired through education,
training, experience or other means
Note 1 to entry: An example of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.