oSIST prEN ISO 13680:2025
(Main)Oil and gas industries including lower carbon energy - Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2024)
Oil and gas industries including lower carbon energy - Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2024)
This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels:
PSL-1, which is the basis of this document;
PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series.
At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.
NOTE 1 The corrosion-resistant alloys included in this document are special alloys in accordance with ISO 4948-1 and ISO 4948-2.
NOTE 2 For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series.
NOTE 3 Accessory products can be manufactured from coupling stock and tubular material, or from solid bar stock or from bored and heat heat-treated bar stock as covered in Annex F.
This document contains no provisions relating to the connection of individual lengths of pipe. This document contains provisions relating to marking of tubing and casing after threading. This document is applicable to the following five groups of products:
a) group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;
b) group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy;
c) group 3, which is composed of stainless alloys with an austenitic structure (iron base);
d) group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);
e) group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure.
NOTE 4 Not all PSL-1 categories and grades can be made cracking resistant in accordance with the ISO 15156 series and are, therefore, not included in PSL-2.
Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Nahtlose Rohre aus korrosionsbeständigen Legierungen zur Verwendung als Futter- oder Steigrohre sowie Muffenvorrohre und Zusatzmaterial - Technische Lieferbedingungen (ISO 13680:2024)
Industries du pétrole et du gaz y compris les énergies à faible teneur en carbone - Produits sans soudure en acier allié résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production, tubes-ébauches pour manchons et matériau pour accessoires - Conditions techniques de livraison (ISO 13680:2024)
Naftna in plinska industrija, vključno z nizkoogljično energijo - Nevarjeni izdelki iz korozijsko odpornih zlitin, ki se uporabljajo kot zaščitne, proizvodne in priključne cevi ter pribor - Tehnični dobavni pogoji (ISO 13680:2024)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2025
Naftna in plinska industrija, vključno z nizkoogljično energijo - Nevarjeni izdelki iz
korozijsko odpornih zlitin, ki se uporabljajo kot zaščitne, proizvodne in priključne
cevi ter pribor - Tehnični dobavni pogoji (ISO 13680:2024)
Oil and gas industries including lower carbon energy - Corrosion-resistant alloy seamless
products for use as casing, tubing, coupling stock and accessory material - Technical
delivery conditions (ISO 13680:2024)
Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Nahtlose Rohre aus
korrosionsbeständigen Legierungen zur Verwendung als Futter- oder Steigrohre sowie
Muffenvorrohre und Zusatzmaterial - Technische Lieferbedingungen (ISO 13680:2024)
Industries du pétrole et du gaz y compris les énergies à faible teneur en carbone -
Produits sans soudure en acier allié résistant à la corrosion utilisés comme tubes de
cuvelage, tubes de production, tubes-ébauches pour manchons et matériau pour
accessoires - Conditions techniques de livraison (ISO 13680:2024)
Ta slovenski standard je istoveten z: EN ISO 13680:2025
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
International
Standard
ISO 13680
Fifth edition
Oil and gas industries including
2024-05
lower carbon energy — Corrosion-
resistant alloy seamless products
for use as casing, tubing, coupling
stock and accessory material —
Technical delivery conditions
Industries du pétrole et du gaz y compris les énergies à faible
teneur en carbone — Produits sans soudure en acier allié
résistant à la corrosion utilisés comme tubes de cuvelage, tubes
de production, tubes-ébauches pour manchons et matériau pour
accessoires — Conditions techniques de livraison
Reference number
ISO 13680:2024(en) © ISO 2024
ISO 13680:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 13680:2024(en)
Contents Page
Foreword .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, abbreviated terms and symbols . 4
3.1 Terms and definitions .4
3.2 Abbreviated terms .6
3.3 Symbols .7
4 General . 8
4.1 Dual normative references .8
4.2 Units of measurement .8
5 Information supplied by the purchaser . 8
6 Manufacturing process . 10
6.1 Melting practices .10
6.2 Product manufacturing process .10
6.3 Pipe end sizing .11
6.4 Straightening . .11
6.5 Processes requiring validation .11
6.6 Traceability . 12
6.7 Manufacturing procedure qualification test . 12
6.8 Process for update of alloys and/or grades . 12
7 Material requirements .12
7.1 Chemical composition . 12
7.2 Tensile properties . 13
7.3 Hardness properties . 13
7.4 Charpy V-notch test properties — General requirements . 13
7.4.1 Evaluation of test results . 13
7.4.2 Critical thickness . 13
7.4.3 Specimen size, orientation and hierarchy . . 13
7.4.4 Alternative size impact test specimens .14
7.4.5 Sub-size test specimens .14
7.4.6 Test temperature . .14
7.5 Charpy V-notch — Absorbed energy requirements for coupling stock and accessory
material — All grades .14
7.5.1 General .14
7.5.2 Requirements for all grades .14
7.6 Charpy V-notch — Absorbed energy requirements for pipe — All grades . 15
7.7 Flattening requirements . .16
7.8 Charpy V-notch test properties at low temperature for group 2 .16
7.8.1 General .16
7.8.2 Evaluation of test results .16
7.8.3 Selection of test specimens .17
7.8.4 Test temperature .17
7.8.5 Absorbed energy requirements .17
7.9 Corrosion properties .17
7.9.1 General .17
7.9.2 Pitting corrosion properties for group 2 .17
7.10 Microstructure properties . .17
7.10.1 Group 1 .17
7.10.2 Group 2 .17
7.10.3 Groups 3 and 4 .18
7.11 Surface condition .18
7.12 Defects .18
7.12.1 Pipe .18
iii
ISO 13680:2024(en)
7.12.2 Coupling stock and accessory material .19
7.12.3 Process control plan .19
8 Dimensions, masses and tolerances . . 19
8.1 Outside diameter, wall thickness and mass.19
8.2 Length .19
8.3 Tolerances .19
8.3.1 Tolerance on outside diameter, wall thickness and mass .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.