SIST EN 12841:2024
(Main)Personal fall protection equipment - Rope access systems - Rope adjustment devices
Personal fall protection equipment - Rope access systems - Rope adjustment devices
This European Standard applies to rope adjustment devices intended for use in rope access systems. It specifies the requirements, test methods, marking and manufacturer’s instructions and information.
Persönliche Absturzschutzausrüstung - Systeme für seilunterstützten Zugang - Seileinstellvorrichtungen
Dieses Dokument gilt für Seileinstellvorrichtungen, die für den Gebrauch in Systemen für seilunterstütztes Arbeiten vorgesehen sind. Es legt die Anforderungen, Prüfverfahren, Kennzeichnung sowie Anweisungen und Informationen des Herstellers fest.
Équipements de protection individuelle pour la prévention des chutes de hauteur - Systèmes d'accès par corde - Dispositif de réglage de corde pour maintien au poste de travail
Le présent document s'applique aux dispositifs de réglage de corde destinés à être utilisés dans les systèmes d'accès par corde. Il spécifie les exigences, les méthodes d'essai, le marquage et les instructions. et informations du fabricant.
Osebna oprema za varovanje pred padci z višine - Vrvni dostopni sistemi - Naprave za nastavitev vrvi
Ta evropski standard se uporablja za naprave za nastavitev vrvi, ki so namenjene uporabi v vrvnih dostopnih sistemih. Določa zahteve, preskusne metode, označevanje ter navodila in informacije proizvajalca.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12841:2024
01-maj-2024
Nadomešča:
SIST EN 12841:2006
Osebna oprema za varovanje pred padci z višine - Vrvni dostopni sistemi -
Naprave za nastavitev vrvi
Personal fall protection equipment - Rope access systems - Rope adjustment devices
Persönliche Absturzschutzausrüstung - Systeme für seilunterstützten Zugang -
Seileinstellvorrichtungen
Équipements de protection individuelle pour la prévention des chutes de hauteur -
Systèmes d'accès par corde - Dispositif de réglage de corde pour maintien au poste de
travail
Ta slovenski standard je istoveten z: EN 12841:2024
ICS:
13.340.60 Zaščita pred padci in zdrsi Protection against falling and
slipping
SIST EN 12841:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12841:2024
---------------------- Page: 2 ----------------------
SIST EN 12841:2024
EN 12841
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2024
EUROPÄISCHE NORM
ICS 13.340.60 Supersedes EN 12841:2006
English Version
Personal fall protection equipment - Rope access systems -
Rope adjustment devices
Équipements de protection individuelle pour la Persönliche Absturzschutzausrüstung - Systeme für
prévention des chutes de hauteur - Systèmes d'accès seilunterstützten Zugang - Seileinstellvorrichtungen
par corde - Dispositif de réglage de corde pour
maintien au poste de travail
This European Standard was approved by CEN on 17 December 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12841:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12841:2024
EN 12841:2024 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements . 9
4.1 General requirements for all Types . 9
4.1.1 Anchor lines . 9
4.1.2 Compatibility . 9
4.1.3 Edge design . 9
4.1.4 Corrosion resistance . 9
4.1.5 Marking and information .
...
SLOVENSKI STANDARD
oSIST prEN 12841:2020
01-november-2020
Osebna oprema za varovanje pred padci z višine - Vrvni dostopni sistemi -
Naprave za nastavitev vrvi
Personal fall protection equipment - Rope access systems - Rope adjustment devices
Persönliche Absturzschutzausrüstung - Systeme für seilunterstützten Zugang -
Seileinstellvorrichtungen
Équipements de protection individuelle pour la prévention des chutes de hauteur -
Systèmes d'accès par corde - Dispositif de réglage de corde pour maintien au poste de
travail
Ta slovenski standard je istoveten z: prEN 12841
ICS:
13.340.60 Zaščita pred padci in zdrsi Protection against falling and
slipping
oSIST prEN 12841:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12841:2020
---------------------- Page: 2 ----------------------
oSIST prEN 12841:2020
DRAFT
EUROPEAN STANDARD
prEN 12841
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 13.340.60 Will supersede EN 12841:2006
English Version
Personal fall protection equipment - Rope access systems -
Rope adjustment devices
Équipements de protection individuelle pour la Persönliche Absturzschutzausrüstung - Systeme für
prévention des chutes de hauteur - Systèmes d'accès seilunterstützten Zugang - Seileinstellvorrichtungen
par corde - Dispositif de réglage de corde pour
maintien au poste de travail
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 160.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12841:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12841:2020
prEN 12841:2020 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements . 9
4.1 General requirements for all Types . 9
4.1.1 Compatibility . 9
4.1.2 Edge design . 9
4.1.3 Corrosion resistance .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.