SIST EN 363:2019
(Main)Personal fall protection equipment - Personal fall protection systems
Personal fall protection equipment - Personal fall protection systems
This European Standard specifies the general characteristics and assembly of personal fall protection systems. It gives examples for the specific types of personal fall protection systems and describes how components may be assembled into systems.
Persönliche Absturzschutzausrüstung - Persönliche Absturzschutzsysteme
Diese Europäische Norm spezifiziert die allgemeinen Eigenschaften und die Zusammensetzung eines persönlichen Absturzschutzsystems. Es gibt Beispiele für die spezifischen Arten von persönlichen Absturzschutzsystemen an und beschreibt, wie Bestandteile in Systeme eingebaut werden können.
Équipement de protection individuelle contre les chutes de hauteur - Systèmes individuels de protection contre les chutes
La présente Norme européenne spécifie les caractéristiques générales et l’assemblage des systèmes individuels de protection contre les chutes. Elle donne des exemples de types spécifiques de systèmes individuels de protection contre les chutes et décrit comment les composants peuvent être assemblés pour constituer un système.
Osebna varovalna oprema za zaščito pred padci - Sistemi za osebno zaščito pred padci
Ta evropski standard določa splošne karakteristike in sestavo sistemov za osebno zaščito pred padci. Navaja primere posebnih vrst sistemov za osebno zaščito pred padci in opisuje, kako se lahko komponente sestavi v sisteme.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SDGFLPersönliche Absturzschutzausrüstung - Persönliche AbsturzschutzsystemeÉquipement de protection individuelle contre les chutes de hauteur - Systèmes individuels de protection contre les chutesPersonal fall protection equipment - Personal fall protection systems13.340.60Protection against falling and slippingICS:Ta slovenski standard je istoveten z:EN 363:2018SIST EN 363:2019en,fr,de01-februar-2019SIST EN 363:2019SLOVENSKI
STANDARDSIST EN 363:20081DGRPHãþD
SIST EN 363:2019
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 363
December
t r s z ICS
s uä u v rä x r Supersedes EN
u x uã t r r zEnglish Version
Personal fall protection equipment æ Personal fall protection systems Équipement de protection individuelle contre les chutes de hauteur æ Systèmes individuels de protection contre les chutes
Persönliche Absturzschutzausrüstung æ Persönliche Absturzschutzsysteme This European Standard was approved by CEN on
s w July
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u x uã t r s z ESIST EN 363:2019
EN 363:2018 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 3.1 Categories . 5 3.2 Systems . 5 3.3 General terms . 6 4 Personal fall protection systems . 6 4.1 General . 6 4.2 Specific types of personal fall protection systems . 7 4.2.1 Restraint system . 7 4.2.2 Work positioning system . 8 4.2.3 Rope access system. 10 4.2.4 Fall arrest system . 12 4.2.5 Rescue system . 16 Annex A (informative)
Significant technical changes between this document and EN 363:2008 . 19 Annex B (informative)
Background and rationale for the changes in this European Standard . 20 Bibliography . 21 SIST EN 363:2019
EN 363:2018 (E) 3 European foreword This document (EN 363:2018) has been prepared by Technical Committee CEN/TC 160 “Protection against falls from height including working belts”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be withdrawn at the latest by June 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 363:2008. Annex A provides details of significant technical changes between this document and the previous edition. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 363:2019
EN 363:2018 (E) 4 Introduction The European product standards for personal fall protection equipment that have been published through CEN/TC 160 “Protection against falls from height including working belts” specify product requirements and test methods for components, which are intended to be assembled to form personal fall protection systems. This European Standard describes characteristics and principles for the assembly of personal fall protection systems in general, and, specifically, for restraint, work positioning, fall arrest, rope access and rescue systems. For the benefit of the user, examples of systems are provided, including figures to illustrate the various systems. This European Standard does not give product requirements and test methods. Product requirements for conformity assessment are defined in the product standards. This European Standard does not define the use of personal fall protection systems, but the recommendations and examples given in this European Standard are based on a common practice of using personal fall protection systems. When a personal fall protection system is used, a system that prevents a fall is preferable to a system that arrests a fall. SIST EN 363:2019
EN 363:2018 (E) 5 1 Scope This document specifies the general characteristics and assembly of personal fall protection systems. It gives examples for the specific types of personal fall protection systems and describes how components may be assembled into systems. 2 Normative references There are no normative references in this document. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 Categories 3.1.1 fall arrest prevention of the user of a personal fall protection system from colliding with the ground, structure, or any other obstacle during a free fall 3.1.2 fall prevention prevention of the user of a personal fall protection system from going into a free fall 3.2 Systems 3.2.1 personal fall protection system assembly of components intended to protect the user against falls from a height, including a body holding device and an attachment system, which can be connected to a reliable anchorage point Note 1 to entry: Excludes systems for professional and private sports activities. Note 2 to entry: The attachment system may include an anchor device. Note 3 to entry: A body holding device may be, for example, a full body harness, sit harness, work positioning belt, rescue harness, rescue loop. 3.2.1.1 restraint system personal fall protection system which prevents the user from reaching zones where the risk of a fall from a height exists 3.2.1.2 work positioning system personal fall protection system which enables the user to work in tension or suspension in such a way that a free fall is prevented 3.2.1.3 rope access system personal fall protection system which enables the user to get to and from the place of work in such a way that a free fall is prevented or arrested, by using a working line and a safety line, connected separately to anchor points SIST EN 363:2019
EN 363:2018 (E) 6 3.2.1.4 fall arrest system personal fall protection system which limits the impact force on the body of the user during fall arrest 3.2.1.5 rescue system personal fall protection system by which a person can rescue themselves or others, in such a way that a free fall is prevented 3.3 General terms 3.3.1 element part of a component Note 1 to entry: Ropes, attachment elements and fastening elements are examples of elements. 3.3.2 component part of a system at a point of sale by the manufacturer, supplied with packaging, marking and information supplied by the manufacturer Note 1 to entry: Harnesses and lanyards are examples of components. 4 Personal fall protection systems 4.1 General Personal fall protection systems protect the user against falls from a height by either preventing or arresting free falls. They include: — restraint systems; — work positioning systems; — rope access systems; — fall arrest systems; — rescue systems. Characteristics A personal fall protection system consists of an assembly of components that can be connected either separably or inseparably. A personal fall protection system includes a body holding device which is attached to a reliable anchorage point via an attachment system, which consists of one or more components that are normally included in the system in accordance with its intended use (e.g. lanyards, connectors, fall arresters, anchor devices). Assembly When combining components into a personal fall protection system, aspects to be taken into account shall at least include: SIST EN 363:2019
EN 363:2018 (E) 7 — suitability of components for the intended use of the personal fall protection system, taking into account all the different phases of use (e.g. access, work); — the characteristics of the workplace (e.g. inclination of workplace, position of anchor point, environmental aspects); — the intended user (e.g. level of competence); — compatibility of components (e.g. interaction between the anchor device and energy absorbing or arrest functions of other components); — ergonomic considerations, e.g. by choosing the correct harness and attachment elements to minimize discomfort and stress to the body; — limitations of use (e.g. as stated in the information supplied by the manufacturer); — the need to facilitate safe and effective rescue operations (e.g. to prevent suspension trauma); — characteristics of the anchorage, e.g. location and strength. Any component used in a personal fall protection system shall be designed and tested for the intended purpose. Suitable connectors would be connectors conforming to EN 362, if they are used as components. Suitable anchor devices would be anchor devices conforming to EN 795 or CEN/TS 16415. Components may be used in various types of personal fall protection systems, as long as they are suitable for the specific purpose. Information supplied by the manufacturer for all components shall be taken into account and additional information on the system should be drawn up, if applicable. 4.2 Specific types of personal fall protection systems 4.2.1 Restraint system A restraint system prevents falls from a height by restricting the travel of the user. For an example of a re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.