This European Standard specifies requirements for performance and associated test methods for single-user and multi-user anchor devices which can be removed from the structure. These anchor devices incorporate single or multiple, stationary or travelling anchor points designed for the attachment of components forming part of a personal fall protection system in accordance with EN 363. This European standard also gives requirements for marking and instructions for use, and guidance on installation.  This European Standard is not applicable to:
- anchor devices used in any sports or recreational activity;
- equipment designed to conform to EN 516 or EN 517;
- elements or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders;
- structural anchors.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for performance and associated test methods for single-user anchor devices which are intended to be removable from the structure. These anchor devices incorporate stationary or travelling (mobile) anchor points designed for the attachment of components of a personal fall protection system in accordance with EN 363.
This European Standard also gives requirements for marking and instructions for use, and guidance on installation.
This European Standard is not applicable to:
-   anchor devices intended to allow more than one user to be attached at any one time;
-   anchor devices used in any sports or recreational activity;
-   equipment designed to conform to EN 516 or EN 517;
-   elements or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders;
-   structural anchors (see 3.3).

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for lanyards. Lanyards conforming to this European Standard are used as connecting elements or components in personal fall protection systems (i.e. restraint systems, work positioning systems, rope access systems, fall arrest systems and rescue systems).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for lanyards. Lanyards conforming to this European Standard are used as connecting elements or components in personal fall protection systems (i.e. restraint systems, work positioning systems, rope access systems, fall arrest systems and rescue systems).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking and information supplied by the manufacturer for connectors. Connectors conforming to this European Standard are used as connecting elements in personal fall protection systems, i.e. fall arrest, work positioning, rope access, restraint and rescue systems.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the minimum general requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging of PPE, which includes body holding devices, and other equipment used in conjunction with a body holding device, to prevent falls, for access, egress and work positioning, to arrest falls and for rescue.
This document is not intended to cover:
1)   specific requirements that are only relevant to the particular PPE or other equipment for protection against falls from a height and its use, which should be specified in the relevant document;
2)   PPE or other equipment for protection against falls from a height used in any sports or recreational activity.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking and information supplied by the manufacturer for connectors. Connectors conforming to this European Standard are used as connecting elements in personal fall protection systems, i.e. fall arrest, work positioning, rope access, restraint and rescue systems.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the minimum general requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging of PPE, which includes body holding devices, and other equipment used in conjunction with a body holding device, to prevent falls, for access, egress and work positioning, to arrest falls and for rescue.
This document is not intended to cover:
1)   specific requirements that are only relevant to the particular PPE or other equipment for protection against falls from a height and its use, which should be specified in the relevant document;
2)   PPE or other equipment for protection against falls from a height used in any sports or recreational activity.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for energy absorbers. Energy absorbers conforming to this European Standard are used as elements or components either integrated in a lanyard, an anchor line or a full body harness or in combination with one of them.
Combinations of an energy absorber and a lanyard are sub-systems constituting one of the fall arrest systems covered by prEN 363, when combined with a full body harness specified in EN 361.
Fall arresters are specified in EN 353-1, EN 353-2 and EN 360.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for retractable type fall arresters. Retractable type fall arresters conforming to this European Standard are sub-systems constituting one of the fall arrest systems covered by prEN 363, when combined with a full body harness specified in EN 361. Other types of fall arresters are specified in EN 353-1 and EN 353-2. Energy absorbers are specified in prEN 355.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for guided type fall arresters including a flexible anchor line which can be secured to an upper anchor point. Guided type fall arresters including a flexible anchor line conforming to this European Standard are sub-systems constituting a part of one of the fall arrest systems covered by prEN 363. Other types of fall arresters are specified in EN 353-1 or EN 360. Energy absorbers are specified in prEN 355.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for retractable type fall arresters. Retractable type fall arresters conforming to this European Standard are sub-systems constituting one of the fall arrest systems covered by prEN 363, when combined with a full body harness specified in EN 361. Other types of fall arresters are specified in EN 353-1 and EN 353-2. Energy absorbers are specified in prEN 355.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for guided type fall arresters including a flexible anchor line which can be secured to an upper anchor point. Guided type fall arresters including a flexible anchor line conforming to this European Standard are sub-systems constituting a part of one of the fall arrest systems covered by prEN 363. Other types of fall arresters are specified in EN 353-1 or EN 360. Energy absorbers are specified in prEN 355.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for energy absorbers. Energy absorbers conforming to this European Standard are used as elements or components either integrated in a lanyard, an anchor line or a full body harness or in combination with one of them.
Combinations of an energy absorber and a lanyard are sub-systems constituting one of the fall arrest systems covered by prEN 363, when combined with a full body harness specified in EN 361.
Fall arresters are specified in EN 353-1, EN 353-2 and EN 360.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The European Standard specifies the requirements, test methods, information supplied by the manufacturer and marking for guided type fall arresters including a rigid anchorage line usually attached to or integrated in climbing ladders or climbing iron tracks adequately adjusted to suitable structures.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The European Standard specifies the requirements, test methods, information supplied by the manufacturer and marking for guided type fall arresters including a rigid anchorage line usually attached to or integrated in climbing ladders or climbing iron tracks adequately adjusted to suitable structures.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for guided type fall arresters including a rigid anchor line usually attached to or integrated in fixed ladders or rungs adequately adjusted to suitable structures. Guided type fall arresters including a rigid anchor line conforming to this European Standard are sub-systems constituting one of the fall arrest systems covered by prEN 363, when combined with a full body harness specified in EN 361 including a front attachment point located appropriately in relation to the fall arrester. Other types of fall arresters are specified in EN 353-2 or in EN 360. Energy absorbers are specified in EN 355.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for guided type fall arresters including a rigid anchor line usually attached to or integrated in fixed ladders or rungs adequately adjusted to suitable structures. Guided type fall arresters including a rigid anchor line conforming to this European Standard are sub-systems constituting one of the fall arrest systems covered by prEN 363, when combined with a full body harness specified in EN 361 including a front attachment point located appropriately in relation to the fall arrester. Other types of fall arresters are specified in EN 353-2 or in EN 360. Energy absorbers are specified in EN 355.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Migrated from Progress Sheet (TC Comment) (2000-07-10): UAP of 4 months (TC Res C 5/1999) (CC/990907)

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies requirements, test methods and instructions for use and marking for anchorage devices designed exclusively for use with personal protective equipment against falls from a height.    This standard does not apply to hooks designed to EN 517, or walkways to EN 516, nor to fixed anchor points forming part of the original structure.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Migrated from Progress Sheet (TC Comment) (2000-07-10): UAP of 4 months (TC Res C 5/1999) (CC/990907)

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies requirements, test methods and instructions for use and marking for anchorage devices designed exclusively for use with personal protective equipment against falls from a height.    This standard does not apply to hooks designed to EN 517, or walkways to EN 516, nor to fixed anchor points forming part of the original structure.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for non-adjustable and adjustable lanyards. Lanyards conforming to this European Standard are used as connecting elements or components in fall arrest systems specified in prEN 363.
Other types of lanyards are specified in EN 358.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for non-adjustable and adjustable lanyards. Lanyards conforming to this European Standard are used as connecting elements or components in fall arrest systems specified in prEN 363.
Other types of lanyards are specified in EN 358.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the terminology and the general requirements for fall arrest systems which serve as personal protective equipment against falls from a height. This European Standard additionally describes examples of how components or assemblies of components may be connected into a fall arrest system. These examples should enable the purchaser or user to assemble all components in a correct manner and to build up a fall arrest system.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the terminology and the general requirements for fall arrest systems which serve as personal protective equipment against falls from a height. This European Standard additionally describes examples of how components or assemblies of components may be connected into a fall arrest system. These examples should enable the purchaser or user to assemble all components in a correct manner and to build up a fall arrest system.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the specific requirements, test methods, instructions for use and marking for connectors. Connectors according to this standard are used in work positioning and fall arrest systems specified in EN 358 and EN 363 respectively. Lanyards with connectors as terminations are specified in EN 354.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard states the general requirements for instructions for use and marking of equipment for protection against falls from heights.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the specific requirements, test methods, instructions for use and marking for connectors. Connectors according to this standard are used in work positioning and fall arrest systems specified in EN 358 and EN 363 respectively. Lanyards with connectors as terminations are specified in EN 354.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard states the general requirements for instructions for use and marking of equipment for protection against falls from heights.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, test methods, instructions for use, marking and packaging for energy absorbers. Energy absorbers according to this standard are used in fall arrest systems specified in EN 363. Fall arresters are specified in EN 353-1, EN 353-2 and EN 360.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, test methods, instructions for use and marking for retractable type fall arresters. Retractable type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 353-1 and EN 353-2, and energy absorbers are specified in EN 355.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, test methods, instructions for use and marking for guided type fall arresters on a flexible anchorage line secured to an upper anchorage point. Guided type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 360 and in EN 353-1. Energy absorbers are specified in EN 355.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the terminology and the general requirements for fall arrest systems which serve as personal protective equipment against falls from a height. This standard additionally describes examples of how components or assemblies of components may be connected into a fall arrest system. These examples should enable the purchaser or user to assemble all components in a correct manner and to build up a fall arrest system.   Note: A fall arrest system does not include anchorage points, but suitable anchorage points as specified in prEN 795 are indispensable for all fall arrest systems.  Work positioning systems are specified in EN 358.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, test methods, instructions for use and marking for guided type fall arresters on a rigid anchorage line usually attached to or integrated in climbing ladders or climbing iron tracks adequately adjusted to suitable structures. Guided type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 360 and in EN 353-2. Energy absorbers are specified in EN 355.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, test methods, instructions for use marking and packaging for fixed adjustable lanyards. Lanyards according to this standard are used in fall arrest systems specified in EN 363. Other types of lanyards are specified in EN 358.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, test methods, instructions for use and marking for retractable type fall arresters. Retractable type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 353-1 and EN 353-2, and energy absorbers are specified in EN 355.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, test methods, instructions for use and marking for guided type fall arresters on a rigid anchorage line usually attached to or integrated in climbing ladders or climbing iron tracks adequately adjusted to suitable structures. Guided type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 360 and in EN 353-2. Energy absorbers are specified in EN 355.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the terminology and the general requirements for fall arrest systems which serve as personal protective equipment against falls from a height. This standard additionally describes examples of how components or assemblies of components may be connected into a fall arrest system. These examples should enable the purchaser or user to assemble all components in a correct manner and to build up a fall arrest system.   Note: A fall arrest system does not include anchorage points, but suitable anchorage points as specified in prEN 795 are indispensable for all fall arrest systems.  Work positioning systems are specified in EN 358.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, test methods, instructions for use and marking for guided type fall arresters on a flexible anchorage line secured to an upper anchorage point. Guided type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 360 and in EN 353-1. Energy absorbers are specified in EN 355.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, test methods, instructions for use marking and packaging for fixed adjustable lanyards. Lanyards according to this standard are used in fall arrest systems specified in EN 363. Other types of lanyards are specified in EN 358.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, test methods, instructions for use, marking and packaging for energy absorbers. Energy absorbers according to this standard are used in fall arrest systems specified in EN 363. Fall arresters are specified in EN 353-1, EN 353-2 and EN 360.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies requirements, testing and the marking, labelling and packaging of systems intended for work positioning and support of the worker at a height including the prevention of a free fall. A work positioning system is not meant to be used for fall arrest.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies requirements, testing and the marking, labelling and packaging of systems intended for work positioning and support of the worker at a height including the prevention of a free fall. A work positioning system is not meant to be used for fall arrest.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day