Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods (ISO 4210-9:2014)

EN ISO 4210-9 specifies saddle and seat-post test methods for ISO 4210-2.

Fahrräder - Sicherheitstechnische Anforderungen an Fahrräder - Teil 9: Prüfverfahren für Sattel und Sattelstütze (ISO 4210-9:2014)

Dieser Teil von ISO 4210 legt die Prüfverfahren für Sattel und Sattelstütze nach ISO 4210-2 fest.

Cycles - Exigences de sécurité des bicyclettes - Partie 9: Méthodes d'essai de la selle et du poste d'assise (ISO 4210-9:2014)

ISO 4210-9:2014 spécifie les méthodes d'essai de la selle et de la tige de selle pour l'ISO 4210‑2.

Kolesa - Varnostne zahteve za kolesa - 9. del: Preskusne metode za sedeže in nosilce sedežev (ISO 4210-9:2014)

Standard EN ISO 4210-9 določa preskusne metode za sedeže in nosilce sedežev za standard ISO 4210-2.

General Information

Status
Published
Public Enquiry End Date
24-Jan-2013
Publication Date
04-Sep-2014
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Aug-2014
Due Date
11-Oct-2014
Completion Date
05-Sep-2014

RELATIONS

Buy Standard

Standard
SIST EN ISO 4210-9:2014 - natisnjeno za čitalnico
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 4210-9:2014
01-oktober-2014
1DGRPHãþD
SIST EN 14764:2006
SIST EN 14766:2006
SIST EN 14781:2006
Kolesa - Varnostne zahteve za kolesa - 9. del: Preskusne metode za sedeže in
nosilce sedežev (ISO 4210-9:2014)

Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods

(ISO 4210-9:2014)

Fahrräder - Sicherheitstechnische Anforderungen an Fahrräder - Teil 9: Prüfverfahren für

Sattel und Sattelstütze (ISO 4210-9:2014)

Cycles - Exigences de sécurité des bicyclettes - Partie 9: Méthodes d'essai de la selle et

du poste d'assise (ISO 4210-9:2014)
Ta slovenski standard je istoveten z: EN ISO 4210-9:2014
ICS:
43.150 Kolesa Cycles
SIST EN ISO 4210-9:2014 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4210-9:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 4210-9:2014
EUROPEAN STANDARD
EN ISO 4210-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 43.150 Supersedes EN 14764:2005, EN 14766:2005, EN
14781:2005
English Version
Cycles - Safety requirements for bicycles - Part 9: Saddles and
seat-post test methods (ISO 4210-9:2014)

Cycles - Exigences de sécurité des bicyclettes - Partie 9: Fahrräder - Sicherheitstechnische Anforderungen an

Méthodes d'essai de la selle et du poste d'assise (ISO Fahrräder - Teil 9: Prüfverfahren für Sättel und Sattelstütze

4210-9:2014) (ISO 4210-9:2014)
This European Standard was approved by CEN on 21 June 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4210-9:2014 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4210-9:2014
EN ISO 4210-9:2014 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 4210-9:2014
EN ISO 4210-9:2014 (E)
Foreword

This document (EN ISO 4210-9:2014) has been prepared by Technical Committee ISO/TC 149 "Cycles" in

collaboration with Technical Committee CEN/TC 333 “Cycles” the secretariat of which is held by UNI.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at

the latest by July 2015.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 14764:2005, EN 14766:2005, EN 14781:2005.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Endorsement notice

The text of ISO 4210-9:2014 has been approved by CEN as EN ISO 4210-9:2014 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 4210-9:2014
---------------------- Page: 6 ----------------------
SIST EN ISO 4210-9:2014
INTERNATIONAL ISO
STANDARD 4210-9
First edition
2014-07-01
Cycles — Safety requirements for
bicycles —
Part 9:
Saddles and seat-post test methods
Cycles — Exigences de sécurité des bicyclettes —
Partie 9: Méthodes d’essai de la selle et du poste d’assise
Reference number
ISO 4210-9:2014(E)
ISO 2014
---------------------- Page: 7 ----------------------
SIST EN ISO 4210-9:2014
ISO 4210-9:2014(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2014

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 4210-9:2014
ISO 4210-9:2014(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Test methods ............................................................................................................................................................................................................. 1

4.1 General ........................................................................................................................................................................................................... 1

4.2 Saddle/seat-post — Security test ........................................................................................................................................... 1

4.3 Saddle — Static strength test ..................................................................................................................................................... 2

4.4 Saddle and seat-post clamp — Fatigue test ................................................................................................................... 4

4.5 Seat-post — Fatigue test and static strength test ..................................................................................................... 5

© ISO 2014 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 4210-9:2014
ISO 4210-9:2014(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).
Any
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.