SIST EN 12201-5:2003
(Main)Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system
This Part of prEN 12201 specifies the characteristics of the fitness for purpose of the assembled piping systems intended for the conveyance of water intended for human consumption, including raw water prior to treatment. It also specifies the test parameters for the test methods referred to in this standard. In conjunction with other Parts of prEN 12201 it is applicable to PE pipes, fittings, valves, their joints and to joints with components of other materials intended to be used under the following conditions: a) a maximum operating, MOP, up to and including 25 bar; b) an operating temperature of 20°C as a reference temperature.
Kunststoff-Rohrleitungssysteme für die Wasserversorgung - Polyethylen (PE) - Teil 5: Gebrauchstauglichkeit des Systems
Diese Norm legt Anforderungen an die Gebrauchstauglichkeit von Rohrleitungssystemen aus PE fest, die für die Wasserversorgung für den menschlichen Gebrauch sowie für die Forleitung von Rohrwasser, das zur Aufbereitung zu Trinkwasser verwendet wird, eingesetzt werden. Sie legt auch die Prüfparameter für die Prüfverfahren fest, auf die in dieser Norm verwiesen wird. Zusammen mit den übrigen Teilen der prEN 12201 gilt dieser Teil für Rohre, Formstücke und Armaturen aus PE, deren Verbindungen untereinander sowie mit Rohrleitungsteilen aus anderen Werkstoffen, die unter den folgenden Bedingungen vorgesehen sind: etc.
Systemes de canalisations en plastique pour l'alimentation en eau - Polyéthylene (PE) - Partie 5 : Aptitude a l'emploi
La présente partie de l'EN 12201 spécifie, apres leur assemblage, les caractéristiques d'aptitude a l'emploi des systemes de canalisations pour le transport de l'eau destinée a la consommation humaine, y compris le transport des eaux brutes avant traitement.
Elle spécifie également les parametres pour les méthodes d'essai auxquelles il est fait référence dans la présente norme.
Conjointement aux autres parties de la présente Norme européenne (voir l'avant-propos), elle s'applique aux tubes, a leurs assemblages et aux assemblages avec des composants PE et d'autres matériaux destinés a etre utilisés selon les conditions suivantes :
a) une pression de service maximale, MOP, pouvant atteindre 25 bar ) inclus ;
b) une température de service de 20 °C comme température de référence.
NOTE 1 Pour des applications fonctionnant a des températures constantes supérieures a 20 °C et jusqu'a 40 °C voir l'Annexe A de l'EN 12201-1:2003.
L'EN 12201 comprend une gamme étendue de pressions de service et spécifie les exigences concernant les couleurs et les additifs.
NOTE 2 Il est de la responsabilité de l'acheteur ou du prescripteur d'effectuer le choix approprié de ces aspects, prenant en compte les exigences particulieres et les regles nationales correspondantes ainsi que les pratiques ou les codes de pose.
Cevni sistemi iz polimernih materialov za oskrbo z vodo - Polietilen (PE) - 5. del: Ustreznost sistema namenu
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni sistemi iz polimernih materialov za oskrbo z vodo - Polietilen (PE) - 5. del:
Ustreznost sistema namenuKunststoff-Rohrleitungssysteme für die Wasserversorgung - Polyethylen (PE) - Teil 5: Gebrauchstauglichkeit des SystemsSystemes de canalisations en plastique pour l'alimentation en eau - Polyéthylene (PE) - Partie 5 : Aptitude a l'emploiPlastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system91.140.60Sistemi za oskrbo z vodoWater supply systems23.040.20Cevi iz polimernih materialovPlastics pipesICS:Ta slovenski standard je istoveten z:EN 12201-5:2003SIST EN 12201-5:2003en01-oktober-2003SIST EN 12201-5:2003SLOVENSKI
STANDARD
SIST EN 12201-5:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12201-5March 2003ICS 23.040.01; 91.140.60English versionPlastics piping systems for water supply - Polyethylene (PE) -Part 5: Fitness for purpose of the systemSystèmes de canalisations en plastique pour alimentationen eau - Polyéthylène (PE) - Partie 5: Aptitude à l'emploiKunststoff-Rohrleitungssysteme für die Wasserversorgung- Polyethylen (PE) - Teil 5: Gebrauchstauglichkeit desSystemsThis European Standard was approved by CEN on 4 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12201-5:2003 ESIST EN 12201-5:2003
EN 12201-5:2003 (E)2ContentsForeword.3Introduction.41Scope.52Normative references.53Terms and definitions, symbols and abbreviations.64Fitness for purpose of the system.64.1General.64.2Preparation of assemblies for testing.74.3Butt fusion joints.74.4Electrofusion joints.84.5Mechanical jointing.94.6Conditioning.94.7Retest in case of failure at 80 °C.10Bibliography.12SIST EN 12201-5:2003
EN 12201-5:2003 (E)3ForewordThis document EN 12201-5:2003 has been prepared by Technical Committee CEN /TC 155, "Plastics pipingsystems and ducting systems" the secretariat of which is held by NEN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by March 2005.This standard is a Part of a System Standard for plastics piping systems, which is a standard for plastics piping of aparticular material for a specified application. There are a number of such Systems Standards.System Standards are based on the results of the work being undertaken in ISO/TC 138 "Plastics pipes, fittingsand valves for the transport of fluids", which is a Technical Committee of the International Organization forStandardization (ISO).They are supported by separate standards on test methods to which references are made throughout the SystemStandard.The System Standards are consistent with standards on general functional requirements and standards oninstallation practices.This European Standard consists of the following Parts, under the general title Plastics piping systems for watersupply — Polyethylene (PE)— Part 1: General.— Part 2: Pipes.— Part 3: Fittings.— Part 4: Valves.— Part 5: Fitness for purpose of the system (this standard).— Part 7: Guidance for the assessment of conformity1)NOTEIt was decided not to publish a Part 6: Recommended practice for installation. Instead, existing national practices would beapplicable.This Part of EN 12201 includes a BibliographySystem Standards for piping systems of other plastics materials used for the conveyance of water include thefollowing:EN 1452,
Plastics piping systems for water supply — Unplasticized poly(vinyl chloride) (PVC-U).prEN 1796,
Plastics piping systems for water supply with or without pressure — Glass-reinforced thermosettingplastics (GRP) based on polyester resins (UP).For components which have conformed to the relevant national standard before [DAV], as shown by themanufacturer or by a certification body, the national standard may continue to be applied until the [DAV + 24months].According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard : Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovak Republic, Spain, Sweden, Switzerland and the United Kingdom.
1)
to be published as as a CEN/TSSIST EN 12201-5:2003
EN 12201-5:2003 (E)4IntroductionThe System Standard, of which this is Part 5, specifies the requirements for a piping system and its componentswhen made from polyethylene (PE). It is intended to be used for water supply intended for human consumption,including the conveyance of raw water prior to treatment.In respect of potential adverse effects on the quality of water intended for human consumption, caused by theproduct covered by this standard:a)
this standard provides no information as to whether the product may be used without restriction in any of theMember States of the EU or EFTA;b)
it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulationsconcerning the use and/or the characteristics of this product remain in force.Requirements and test methods for components of the piping system are specified in EN 12201-1, EN 12201-2[1],EN 12201-3[2] and EN 12201-4[3]. PrCEN/TS 12201-7[4] gives guidance for the assessment of conformity.This Part of this European Standard covers the characteristics of the fitness for purpose of the system.SIST EN 12201-5:2003
EN 12201-5:2003 (E)51 ScopeThis Part of this European Standard specifies the characteristics of the fitness for purpose of the assembled pipingsystems intended for the conveyance of water intended for human consumption, including raw water prior totreatment.It also specifies the test parameters for the test methods referred to in this standard.In conjunction with other Parts of this European Standard (see Foreword) it is applicable to PE pipes, fittings,valves, their joints and to joints with components of other materials intended to be used under the followingconditions:a)
a maximum operating pressure, MOP, up to 25 bar 2) ;b)
an operating temperature of 20 °C as a reference temperature.NOTE 1For applications operating at constant temperatures greater than 20 °C up to 40 °C, see annex A of EN 12201-1:2003.EN 12201 covers a range of maximum operating pressures and gives requirements concerning colours andadditives.NOTE 2It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account theirparticular requirements and any relevant national guidance or regulations and installation practices or codes.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 712,
Thermoplastics piping systems — End-load-bearing mechanical joints between pressure pipes andfittings — Test method for resistance to pull-out under constant longitudinal force.EN 713,
Plastics piping systems — Mechanical joints between fittings and polyolefin pressure pipes — Testmethod for leaktightness under internal pressure of assemblies subjected to bending.EN 715,
Thermoplastics piping systems — End-load bearing joints between small diameter pressure pipes andfittings - Test method for leaktightness under internal water pressure, including end thrust.EN 911,
Plastics piping systems — Elastomeric sealing ring type joints and mechanical joints for thermoplasticspressure piping — Test method for leaktightness under external hydrostatic pressure.EN 921:1994,
Plastics piping systems — Thermoplastics pipes — Determination of resistance to internal pressureat constant temperature.EN 12201-1:2003,
Plastics piping systems for water supply — Polyethylene (PE) — Part 1: General.ISO 11413:1996,
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE)pipe and an electrofusion fitting.ISO 11414:1996,
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test pieceassemblies by butt fusion .ISO 13953:2001,
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.