SIST ISO 4802-1:2018

Glassware -- Hydrolytic resistance of the interior surfaces of glass containers -- Part 1: Determination by titration method and classification

This part of ISO 4802 specifies:
a) a method for determining the hydrolytic resistance of the interior surfaces of glass containers
when subjected to attack by water at 121 °C ± 1 °C for 60 min ± 1 min. The resistance is measured
by titration of a known aliquot portion of the extraction solution produced with hydrochloric acid
solution, in which case the resistance is inversely proportional to the volume of acid required;
b) a classification of glass containers according to the hydrolytic resistance of the interior surfaces
determined by the methods specified in this part of ISO 4802.

Verrerie -- Résistance hydrolytique des surfaces internes des récipients en verre -- Partie 1: Détermination par analyse titrimétrique et classification

Steklovina - Hidrolitska odpornost notranjih površin steklenih posod - 1. del: Določanje s titracijsko metodo in klasifikacija

Ta del standarda ISO 4802 določa:
a) metodo za določanje hidrolitske odpornosti notranjih površin steklenih posod, ki so izpostavljene vodi s temperaturo 121 °C ± 1 °C za 60 minut ± 1 minuta. Odpornost se meri s titracijo znanega alikvotnega deleža ekstrakcijske raztopine, pridobljene z raztopino klorovodikove kisline; v tem primeru je odpornost obratno sorazmerna s prostornino potrebne kisline;
b) klasifikacijo steklenih posod glede na hidrolitsko odpornost notranjih površin, ki je določena z metodami, opredeljenimi v tem delu standarda ISO 4802.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 29-Jul-2018
• Publication Date: 23-Aug-2018
• Withdrawal Date: 21-Apr-2024
• ICS: 71.040.20 - Laboratory ware and related apparatus
• Technical Committee: VAZ - Healthcare
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-Apr-2024
• Due Date: 15-May-2024
• Completion Date: 22-Apr-2024
• Ref Project: ISO 4802-1:2016 - Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification

Relations

• Replaces: SIST ISO 4802-1:1995 - Glassware -- Hydrolytic resistance of the interior surfaces of glass containers -- Part 1: Determination by titration method and classification
• Effective Date: 01-Sep-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 4802-1:2018
01-september-2018
1DGRPHãþD
SIST ISO 4802-1:1995
6WHNORYLQD+LGUROLWVNDRGSRUQRVWQRWUDQMLKSRYUãLQVWHNOHQLKSRVRGGHO
'RORþDQMHVWLWUDFLMVNRPHWRGRLQNODVLILNDFLMD
Glassware -- Hydrolytic resistance of the interior surfaces of glass containers -- Part 1:
Determination by titration method and classification
Verrerie -- Résistance hydrolytique des surfaces internes des récipients en verre -- Partie
1: Détermination par analyse titrimétrique et classification
Ta slovenski standard je istoveten z: ISO 4802-1:2016
ICS:
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
SIST ISO 4802-1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 4802-1:2018

---------------------- Page: 2 ----------------------

SIST ISO 4802-1:2018
INTERNATIONAL ISO
STANDARD 4802-1
Third edition
2016-06-15
Glassware — Hydrolytic resistance
of the interior surfaces of glass
containers —
Part 1:
Determination by titration method
and classification
Verrerie — Résistance hydrolytique des surfaces internes des
récipients en verre —
Partie 1: Détermination par analyse titrimétrique et classification
Reference number
ISO 4802-1:2016(E)
©
ISO 2016

---------------------- Page: 3 ----------------------

SIST ISO 4802-1:2018
ISO 4802-1:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 4802-1:2018
ISO 4802-1:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 4
5 Reagents . 4
6 Apparatus . 5
7 Sample preparation . 6
7.1 Sample size . 6
7.2 Determination of the filling volume . 6
7.2.1 Flat-bottomed containers ≤20 mm outer flange diameter (except
ampoules, syringes and cartridges) . 6
7.2.2 Flat-bottomed containers >20 mm outer flange diameter . 6
...

INTERNATIONAL ISO
STANDARD 4802-1
Third edition
2016-06-15
Glassware — Hydrolytic resistance
of the interior surfaces of glass
containers —
Part 1:
Determination by titration method
and classification
Verrerie — Résistance hydrolytique des surfaces internes des
récipients en verre —
Partie 1: Détermination par analyse titrimétrique et classification
Reference number
ISO 4802-1:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 4802-1:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 4802-1:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 4
5 Reagents . 4
6 Apparatus . 5
7 Sample preparation . 6
7.1 Sample size . 6
7.2 Determination of the filling volume . 6
7.2.1 Flat-bottomed containers ≤20 mm outer flange diameter (except
ampoules, syringes and cartridges) . 6
7.2.2 Flat-bottomed containers >20 mm outer flange diameter . 6
7.2.3 Round-bottomed containers. 7
7.2.4 Lipped containers . 7
7.2.5 Ampoules . 7
7.2.6 Syringes and cartridges . 7
8 Procedure. 8
8.1 General .
...

SLOVENSKI STANDARD
oSIST ISO 4802-1:2018
01-julij-2018
6WHNORYLQD+LGUROLWVNDRGSRUQRVWQRWUDQMLKSRYUãLQVWHNOHQLKSRVRGGHO
'RORþDQMHVWLWUDFLMVNRPHWRGRLQNODVLILNDFLMD
Glassware -- Hydrolytic resistance of the interior surfaces of glass containers -- Part 1:
Determination by titration method and classification
Verrerie -- Résistance hydrolytique des surfaces internes des récipients en verre -- Partie
1: Détermination par analyse titrimétrique et classification
Ta slovenski standard je istoveten z: ISO 4802-1:2016
ICS:
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
oSIST ISO 4802-1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST ISO 4802-1:2018

---------------------- Page: 2 ----------------------
oSIST ISO 4802-1:2018
INTERNATIONAL ISO
STANDARD 4802-1
Third edition
2016-06-15
Glassware — Hydrolytic resistance
of the interior surfaces of glass
containers —
Part 1:
Determination by titration method
and classification
Verrerie — Résistance hydrolytique des surfaces internes des
récipients en verre —
Partie 1: Détermination par analyse titrimétrique et classification
Reference number
ISO 4802-1:2016(E)
©
ISO 2016

---------------------- Page: 3 ----------------------
oSIST ISO 4802-1:2018
ISO 4802-1:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST ISO 4802-1:2018
ISO 4802-1:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 4
5 Reagents . 4
6 Apparatus . 5
7 Sample preparation . 6
7.1 Sample size . 6
7.2 Determination of the filling volume . 6
7.2.1 Flat-bottomed containers ≤20 mm outer flange diameter (except
ampoules, syringes and cartridges) . 6
7.2.2 Flat-bottomed containers >20 mm outer flange diameter . 6
7.2.3 Round-bottomed containers.
...