SIST EN ISO 11200:2014/A1:2020
(Amendment)Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)
2020-01-17 JF: Through decision BT C190/2019, the BT approved the removal of the link for this standard with the Machinery Directive.
2019-05-31 JF: Following the discussion at the Nucleus (core group of the CEN-CENELEC sector on machinery safety), it was concluded that this standard should not be listed in the Official Journal of European Union (OJEU) under the Machinery Directive 2006/42/EC because these are guidelines. This had been agreed with the TC. CCMC is preparing the BT document on the withdrawal of the link with the Machinery Directive.
2018-06-13 - in-check TAN : Consultant's assessment is missing.
Akustik - Geräuschabstrahlung von Maschinen und Geräten - Leitlinien zur Anwendung der Grundnormen zur Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten - Änderung 1 (ISO 11200:2014/Amd 1:2018)
No scope available
Acoustique - Bruit émis par les machines et équipements - Guide d'utilisation des normes de base pour la détermination des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées - Amendement 1 (ISO 11200:2014/Amd 1:2018)
Akustika - Emisija hrupa strojev in naprav - Smernice za uporabo temeljnih standardov za ugotavljanje emisijskih ravni zvočnega tlaka na mestu delovanja in na drugih opredeljenih mestih - Dopolnilo A1 (ISO 11200:2014/Amd 1:2018)
General Information
Relations
Overview
EN ISO 11200:2014/A1:2020 is an amendment to the international and European standard on acoustics: noise emitted by machinery and equipment. It provides guidelines for the use of basic standards when determining emission sound pressure levels at a work station and at other specified positions. The amendment (ISO 11200:2014/Amd 1:2018) was approved by CEN and adopted as EN ISO 11200:2014/A1:2020 in 2020.
This document is explicitly guidance: it clarifies references and editorial elements of the base standard and is intended to support consistent acoustic assessment and noise measurement practices across national standards bodies. The CEN decision removed the standard's formal link with the EU Machinery Directive on the basis that it provides non-normative guidance rather than prescriptive requirements.
Key Topics
- Scope and purpose: Guidance on determining emission sound pressure levels at workstations and other specified positions for machinery and equipment.
- Amendment details: Includes dated references (e.g., ISO 11203:1995 and ISO 11205:2003), editorial corrections, and figure replacements to improve clarity.
- Technical edits: Examples of specific changes in A1 include replacing “<” with “≤” in a conformity clause and updating Figures B.1 and B.2 to clarify microphone and machine positions.
- Status and adoption: Approved by CEN (November 2019) and to be adopted as a national standard by CEN members; endorsed without modification from the ISO amendment text.
Applications
EN ISO 11200:2014/A1:2020 is useful for professionals who need to perform or evaluate noise measurements related to machinery, including:
- Acoustic consultants preparing noise assessments for workplaces and production lines.
- Health and safety teams conducting workstation noise evaluations and exposure screening.
- Design engineers seeking to document emission sound pressure levels for product datasheets or internal risk assessments.
- Standards bodies and laboratories harmonizing methods for in situ noise measurement and reporting.
Practical benefits include more consistent measurement reporting, clearer reference links to related ISO methods, and improved reproducibility of onsite noise assessments.
Related Standards
- ISO 11201 - (related basic standard on measurement at workstations) [reference in base suite]
- ISO 11202 - (related methods for determining emission levels)
- ISO 11203:1995 - Determination of emission sound pressure levels at workstations (dated reference added by A1)
- ISO 11205:2003 - Engineering method using sound intensity (dated reference added by A1)
Keywords: EN ISO 11200, emission sound pressure levels, machinery noise, workstation noise, acoustic assessment, noise measurement, CEN amendment.
Frequently Asked Questions
SIST EN ISO 11200:2014/A1:2020 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)". This standard covers: 2020-01-17 JF: Through decision BT C190/2019, the BT approved the removal of the link for this standard with the Machinery Directive. 2019-05-31 JF: Following the discussion at the Nucleus (core group of the CEN-CENELEC sector on machinery safety), it was concluded that this standard should not be listed in the Official Journal of European Union (OJEU) under the Machinery Directive 2006/42/EC because these are guidelines. This had been agreed with the TC. CCMC is preparing the BT document on the withdrawal of the link with the Machinery Directive. 2018-06-13 - in-check TAN : Consultant's assessment is missing.
2020-01-17 JF: Through decision BT C190/2019, the BT approved the removal of the link for this standard with the Machinery Directive. 2019-05-31 JF: Following the discussion at the Nucleus (core group of the CEN-CENELEC sector on machinery safety), it was concluded that this standard should not be listed in the Official Journal of European Union (OJEU) under the Machinery Directive 2006/42/EC because these are guidelines. This had been agreed with the TC. CCMC is preparing the BT document on the withdrawal of the link with the Machinery Directive. 2018-06-13 - in-check TAN : Consultant's assessment is missing.
SIST EN ISO 11200:2014/A1:2020 is classified under the following ICS (International Classification for Standards) categories: 17.140.20 - Noise emitted by machines and equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 11200:2014/A1:2020 has the following relationships with other standards: It is inter standard links to SIST EN ISO 11200:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 11200:2014/A1:2020 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/396, M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN ISO 11200:2014/A1:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2020
Akustika - Emisija hrupa strojev in naprav - Smernice za uporabo temeljnih
standardov za ugotavljanje emisijskih ravni zvočnega tlaka na mestu delovanja in
na drugih opredeljenih mestih - Dopolnilo A1 (ISO 11200:2014/Amd 1:2018)
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic
standards for the determination of emission sound pressure levels at a work station and
at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)
Akustik - Geräuschabstrahlung von Maschinen und Geräten - Leitlinien zur Anwendung
der Grundnormen zur Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz
und an anderen festgelegten Orten - Änderung 1 (ISO 11200:2014/Amd 1:2018)
Acoustique - Bruit émis par les machines et équipements - Guide d'utilisation des
normes de base pour la détermination des niveaux de pression acoustique d'émission
au poste de travail et en d'autres positions spécifiées - Amendement 1 (ISO
11200:2014/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 11200:2014/A1:2020
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11200:2014/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 17.140.20
English Version
Acoustics - Noise emitted by machinery and equipment -
Guidelines for the use of basic standards for the
determination of emission sound pressure levels at a work
station and at other specified positions - Amendment 1
(ISO 11200:2014/Amd 1:2018)
Acoustique - Bruit émis par les machines et Akustik - Geräuschabstrahlung von Maschinen und
équipements - Guide d'utilisation des normes de base Geräten - Leitlinien zur Anwendung der Grundnormen
pour la détermination des niveaux de pression zur Bestimmung von Emissions-Schalldruckpegeln am
acoustique d'émission au poste de travail et en d'autres Arbeitsplatz und an anderen festgelegten Orten -
positions spécifiées - Amendement 1 (ISO Änderung 1 (ISO 11200:2014/Amd 1:2018)
11200:2014/Amd 1:2018)
This amendment A1 modifies the European Standard EN ISO 11200:2014; it was approved by CEN on 20 November 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11200:2014/A1:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 11200:2014/A1:2020) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which
is held by DIN.
This Amendment to the European Standard EN ISO 11200:2014 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by August 2020, and
conflicting national standards shall be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11200:2014/Amd 1:2018 has been approved by CEN as EN ISO 11200:2014/A1:2020
without any modification.
...
The SIST EN ISO 11200:2014/A1:2020 standard provides comprehensive guidelines on the determination of emission sound pressure levels generated by machinery and equipment. Its primary focus is to facilitate accurate measurements at workstations and other specified locations, ensuring that noise pollution is adequately addressed in occupational settings. One of the significant strengths of this standard lies in its practical application. By offering guidelines for using basic standards related to acoustics, it assists manufacturers and operators in assessing the noise that machinery and equipment emit. This is crucial for maintaining compliance with occupational and environmental noise regulations, ultimately contributing to the enhancement of workplace safety and employee well-being. The relevance of the SIST EN ISO 11200:2014/A1:2020 standard has been underscored by recent amendments, particularly with the decision to remove its link to the Machinery Directive. This change emphasizes its role as a guideline rather than a directive, highlighting the flexibility it provides to industries in terms of noise emission management. Moreover, the standard remains a valuable resource for stakeholders involved in health and safety, environmental protection, and quality assurance. Establishing a thorough understanding of noise emissions not only aids in regulatory compliance but also promotes a culture of sound management practices in various sectors. In summary, the SIST EN ISO 11200:2014/A1:2020 standard is a critical tool for addressing noise emitted by machinery and equipment. Its clear guidelines, strengths in practical application, and relevance to current regulatory landscapes make it an indispensable resource for ensuring compliance and promoting workplace safety.
La norme SIST EN ISO 11200:2014/A1:2020 est un document essentiel dans le domaine de l'acoustique, particulièrement en ce qui concerne le bruit émis par les machines et équipements. La portée de cette norme est bien définie, fournissant des directives pour l'utilisation de normes de base afin de déterminer les niveaux de pression acoustique émis à un poste de travail et à d'autres positions spécifiées. Une des forces notables de cette norme est son adaptabilité face aux évolutions du cadre réglementaire. En effet, le retrait du lien avec la Directive Machines montre une volonté de clarifier son application sans confondre les directives avec des exigences strictes. Cette décision illustre une approche pragmatique et orientée vers le terrain, permettant aux utilisateurs de mieux intégrer ces directives dans leurs processus sans les contraintes liées à la réglementation. Cette norme se démarque également par sa capacité à fournir des guidelines claires, ce qui la rend particulièrement pertinente pour les professionnels de l'industrie cherchant à évaluer et à maîtriser le bruit dans les environnements de travail. L'accent mis sur les niveaux de pression acoustique à des positions spécifiques aide non seulement à respecter des normes de sécurité, mais soutient également des efforts plus larges en matière de santé et de bien-être au travail. En somme, la SIST EN ISO 11200:2014/A1:2020 constitue une référence clé pour les acteurs concernés par la gestion du bruit dans les milieux industriels, offrant une approche standardisée et fondée sur des principes solides tout en restant flexible et adaptée aux besoins actuels. Cela souligne son importance et sa pertinence dans le domaine de l'acoustique aujourd'hui.
SIST EN ISO 11200:2014/A1:2020は、機械および設備から発せられる騒音に関する標準であり、作業ステーションおよび他の指定された位置での音圧レベルの測定に関する基本基準の使用に関するガイドラインを提供します。この標準は、騒音の評価を行う際に必要な基準を明確に示しており、その適用範囲は制作環境における音の影響を軽減するための重要な要素となっています。 この標準の強みは、音圧レベルの測定に対する具体的な指針を提供している点です。これにより、使用者は様々な作業環境における騒音の理解と管理が可能となります。また、標準が改訂されることで、最新の技術や方法論を反映し、より効果的な現場改善が期待できるようになります。 さらに、本標準はEUの機械指令との関連が取り去られたことで、より柔軟な適用が可能になり、騒音管理のための基準が普及しやすくなっています。このように、SIST EN ISO 11200:2014/A1:2020は、作業環境における健康と安全を守るための基本的なツールとして非常に重要であり、騒音管理の実施において計画的かつ戦略的なアプローチを支援します。
Die SIST EN ISO 11200:2014/A1:2020 bietet umfassende Richtlinien zur Bestimmung von Emissions-Schallpegeln, die von Maschinen und Geräten an einem Arbeitsplatz und an anderen festgelegten Positionen abgegeben werden. Der Standard ist besonders relevant für die Akustik und Umweltverträglichkeit im industriellen Sektor, da er es ermöglicht, Geräuschquellen systematisch zu identifizieren und zu bewerten. Ein wesentlicher Stärke der Norm liegt in ihrer strukturierten Herangehensweise zur Anwendung grundlegender Standards, wodurch eine konsistente und umfassende Bewertung der Schallemissionen gewährleistet wird. Zudem stellt die Aktualisierung durch die Änderungsfassung 1 (A1) von 2020 sicher, dass die Richtlinien an die neuesten Anforderungen und wissenschaftlichen Erkenntnisse angepasst sind. Die Entscheidung, den Standard von der Maschinenrichtlinie 2006/42/EG zu entkoppeln, unterstreicht seine Rolle als nützliche Leitlinie für die Schallmessung, ohne dabei regulatorische Hürden aufzubauen. Dies fördert eine größere Nutzung der Norm in der Industrie, da Unternehmen nicht durch zusätzliche Bürokratie behindert werden. Die Relevanz der SIST EN ISO 11200:2014/A1:2020 zeigt sich auch in ihrer Anwendung bei der Förderung von Arbeitsplätzen, die nicht nur effizient, sondern auch lärmmindert gestaltet sind. Durch die Einhaltung dieser Richtlinien können Unternehmen nicht nur gesetzliche Anforderungen erfüllen, sondern auch einen positiven Einfluss auf das Wohlbefinden ihrer Mitarbeiter und die Umwelt ausüben. Insgesamt stellt die SIST EN ISO 11200:2014/A1:2020 ein wichtiges Instrument dar, um den fortschreitenden Anforderungen an Lärmschutz und Emissionskontrolle in der modernen Industrie gerecht zu werden.
SIST EN ISO 11200:2014/A1:2020 표준은 기계 및 장비에서 발생하는 소음에 대한 지침을 제공하는 데 초점을 맞추고 있습니다. 이 표준은 작업장 및 다른 지정된 위치에서 방출 음압 수준을 결정하는 기본 표준의 사용에 대한 가이드라인을 제시하여, 소음 평가 및 관리의 기초를 마련하고 있습니다. 이 표준의 주요 강점은 명확한 지침과 함께 다양한 소음 측정 환경에서의 일관성을 제공합니다. 특히, 작업장에서의 소음 측정을 위한 절차를 정립함으로써, 소음 피해를 예방하고 작업자의 건강과 안전을 증진시키는 데 큰 기여를 합니다. 또한, 소음 관리에 대한 국제적 기준을 따르기 때문에, 글로벌 기업들이 다양한 지역에서 일관된 소음 관리 전략을 적용하는 데 유용합니다. 또한, 이 표준은 기계 지침(Machinery Directive)과 연결을 제거하였다는 점에서 주목할 만합니다. 이는 기계 안전에 대한 규제의 변화가 필요함을 반영하며, 기존의 기계 지침에 구애받지 않고 보다 유연한 적용이 가능하도록 변화했습니다. 표준의 이러한 변화는 소음 측정에 대한 새로운 접근 방식을 제공하며, 관련 업계의 표준화 과정에 매우 중요한 요소로 작용할 것입니다. 결론적으로, SIST EN ISO 11200:2014/A1:2020 표준은 기계 및 장비에서 발생하는 소음에 대한 효과적인 측정 및 관리 기법을 제시하며, 현대 산업 환경에서의 소음 관련 문제 해결에 필수적인 지침을 제공합니다. 이를 통해 소음에 대한 이해를 증진시키고, 건강 및 안전을 우선시하는 환경을 조성할 수 있게 됩니다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...