Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)

2021-04-15 HD: Through Decision BT C067/2021, BT approved revised Annex ZA after Formal Vote

Akustik - Geräuschabstrahlung von Maschinen und Geräten - Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten unter Anwendung angenäherter Umgebungskorrekturen - Änderung 1 (ISO 11202:2010/Amd 1:2020)

[Not available]

Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées en appliquant des corrections d'environnement approximatives - Amendement 1 (ISO 11202:2010/Amd 1:2020)

Akustika - Emisija hrupa naprav in opreme - Merjenje emisijske ravni zvočnega tlaka na delovnem mestu in na drugih opredeljenih mestih z uporabo približnih popravkov zaradi okolja - Dopolnilo A1 (ISO 11202:2010/Amd 1:2020)

General Information

Status
Published
Public Enquiry End Date
24-Sep-2019
Publication Date
29-Jun-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Jun-2021
Due Date
19-Aug-2021
Completion Date
30-Jun-2021

RELATIONS

Buy Standard

Amendment
SIST EN ISO 11202:2010/A1:2021
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Amendment
SIST EN ISO 11202:2010/oprA1:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 11202:2010/A1:2021
01-september-2021
Akustika - Emisija hrupa naprav in opreme - Merjenje emisijske ravni zvočnega
tlaka na delovnem mestu in na drugih opredeljenih mestih z uporabo približnih
popravkov zaradi okolja - Dopolnilo A1 (ISO 11202:2010/Amd 1:2020)
Acoustics - Noise emitted by machinery and equipment - Determination of emission

sound pressure levels at a work station and at other specified positions applying

approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)
Akustik - Geräuschabstrahlung von Maschinen und Geräten - Bestimmung von

Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten unter

Anwendung angenäherter Umgebungskorrekturen - Änderung 1 (ISO 11202:2010/Amd
1:2020)

Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de

pression acoustique d'émission au poste de travail et en d'autres positions spécifiées en

appliquant des corrections d'environnement approximatives - Amendement 1 (ISO
11202:2010/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 11202:2010/A1:2021
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
SIST EN ISO 11202:2010/A1:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11202:2010/A1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 11202:2010/A1:2021
EN ISO 11202:2010/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2021
EUROPÄISCHE NORM
ICS 17.140.20
English Version
Acoustics - Noise emitted by machinery and equipment -
Determination of emission sound pressure levels at a work
station and at other specified positions applying
approximate environmental corrections - Amendment 1
(ISO 11202:2010/Amd 1:2020)

Acoustique - Bruit émis par les machines et Akustik - Geräuschabstrahlung von Maschinen und

équipements - Détermination des niveaux de pression Geräten - Bestimmung von Emissions-

acoustique d'émission au poste de travail et en d'autres Schalldruckpegeln am Arbeitsplatz und an anderen

positions spécifiées en appliquant des corrections festgelegten Orten unter Anwendung angenäherter

d'environnement approximatives - Amendement 1 Umgebungskorrekturen - Änderung 1 (ISO

(ISO 11202:2010/Amd 1:2020) 11202:2010/Amd 1:2020)

This amendment A1 modifies the European Standard EN ISO 11202:2010; it was approved by CEN on 14 April 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11202:2010/A1:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11202:2010/A1:2021
EN ISO 11202:2010/A1:2021 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Annex ZA (informative) Relationship between this European Standard and the essential

requirements of Directive 2006/42/EC aimed to be covered ........................................................ 4

---------------------- Page: 4 ----------------------
SIST EN ISO 11202:2010/A1:2021
EN ISO 11202:2010/A1:2021 (E)
European foreword

This document (EN ISO 11202:2010/A1:2021) has been prepared by Technical Committee ISO/TC 43

"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which

is held by DIN.

This Amendment to the European Standard EN ISO 11202:2010 shall be given the status of a national

standard, either by publication of an identical text or by endorsement, at the latest by November 2021,

and conflicting national standards shall be withdrawn at the latest by November 2021.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this

document.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 11202:2010/Amd 1:2020 has been approved by CEN as EN ISO 11202:2010/A1:2021

without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 11202:2010/A1:2021
EN ISO 11202:2010/A1:2021 (E)
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered

This European Standard has been prepared under a Commission’s standardization request M/396

(Machinery) to provide one voluntary means of conforming to essential requirements of Directive

2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and

amending Directive 95/16/EC (recast).

Once this standard is cited in the Official Journal of the European Union under that Directive,

compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of

the scope of this standard, a presumption of conformity with the corresponding essential requirements

of that Directive, and associated EFTA regulations.

Table ZA.1— Correspondence between this European Standard and Annex I of Directive

2006/42/EC
The relevant essential Clause(s)/sub-clause(s) of this Remarks/Notes
Requirements of Directive EN
2006/42/EC
1.7.4.2 u) Clauses 4, 5, 6, 7, 8, 9, 10, 11, 12,
13, 14, Annex A, Annex B

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European

Standard is maintained in the list published in the Official Journal of the European Union. Users of this

standard should consult frequently the latest list published in the Official Journal of the European

Union.

WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of

this standard.
---------------------- Page: 6 ----------------------
SIST EN ISO 11202:2010/A1:2021
INTERNATIONAL ISO
STANDARD 11202
Second edition
2010-05-15
AMENDMENT 1
2020-08
Acoustics — Noise emitted by
machinery and equipment —
Determination of emission sound
pressure levels at a work station
and at other specified positions
applying approximate environmental
corrections
AMENDMENT 1
Acoustique — Bruit émis par les machines et équipements —
Détermination des niveaux de pression acoustique d'émission au
poste de travail et en d'autres positions spécifiées en appliquant des
corrections d'environnement approximatives
AMENDEMENT 1
Reference number
ISO 11202:2010/Amd.1:2020(E)
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 11202:2010/A1:2021
ISO 11202:2010/Amd.1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11202:2010/A1:2021
ISO 11202:2010/Amd.1:2020(E)
Foreword
ISO (the International Organization for Standardization)
...

SLOVENSKI STANDARD
SIST EN ISO 11202:2010/oprA1:2019
01-september-2019
Akustika - Emisija hrupa naprav in opreme - Merjenje emisijske ravni zvočnega
tlaka na delovnem mestu in na drugih opredeljenih mestih z uporabo približnih
popravkov zaradi okolja - Dopolnilo A1 (ISO 11202:2010/DAM 1:2019)
Acoustics - Noise emitted by machinery and equipment - Determination of emission

sound pressure levels at a work station and at other specified positions applying

approximate environmental corrections - Amendment 1 (ISO 11202:2010/DAM 1:2019)
Akustik - Geräuschabstrahlung von Maschinen und Geräten - Bestimmung von

Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten unter

Anwendung angenäherter Umgebungskorrekturen - Änderung 1 (ISO 11202:2010/DAM
1:2019)

Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de

pression acoustique d'émission au poste de travail et en d'autres positions spécifiées en

appliquant des corrections d'environnement approximatives - Amendement 1 (ISO
11202:2010/DAM 1:2019)
Ta slovenski standard je istoveten z: EN ISO 11202:2010/prA1
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
SIST EN ISO 11202:2010/oprA1:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11202:2010/oprA1:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 11202:2010/oprA1:2019
DRAFT AMENDMENT
ISO 11202:2010/DAM 1
ISO/TC 43/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2019-05-22 2019-08-14
Acoustics — Noise emitted by machinery and equipment
— Determination of emission sound pressure levels at
a work station and at other specified positions applying
approximate environmental corrections
AMENDMENT 1

Acoustique — Bruit émis par les machines et équipements — Détermination des niveaux de pression

acoustique d'émission au poste de travail et en d'autres positions spécifiées en appliquant des corrections

d'environnement approximatives
AMENDEMENT 1
ICS: 17.140.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11202:2010/DAM 1:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
SIST EN ISO 11202:2010/oprA1:2019
ISO 11202:2010/DAM 1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 11202:2010/oprA1:2019
ISO 11202:2010/DAM 1:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso

.org/iso/foreword .html.

This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 1, Noise.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/members .html.
© ISO 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST EN ISO 11202:2010/oprA1:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 11202:2010/oprA1:2019
ISO 11202:2010/DAM 1:2019(E)
Acoustics — Noise emitted by machinery and equipment
— Determination of emission sound pressure levels at
a work station and at other specified positions applying
approximate environmental corrections
AMENDMENT 1
3.20
Replace text of Note 2

"The work station does not have to be located on the reference measurement surface."

"The work station can be located on the reference measurement surface, but this is not necessary. The

reference measurement surface can be used to determine K ."
3.21
Replace text of Note 2

"For the purposes of this International Standard, the environmental correction, K , is only used as an

indicator to qualify the environment and is determined for the reference measurement surface."

"For the purposes of this International Standard, the environmental correction, K , is used as an

indicator to qualify the environment in 6.2 and used to calculate the local environmental correction K

in A.2."
3.26
Replace definition and Note

"distance from the work station to the closest major sound source of the machine under test, without

screening objects protruding into the line of sight between the major sound source and the work station

NOTE In the case of extended sound-radiating areas, d is the length of the shortest possible line of sight

between the source under test and the work station."

"mean distance from the work station to the closest major sound source of the machine under test,

without screening objects protruding into the line of sight between the major sound source and the

work station given by
dd+
where
© ISO 2019 – All rights rese
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.