oSIST prEN ISO 56008:2023

Innovation management - tools and methods for innovation operation measurements - Guidance (ISO/DIS 56008:2023)

Meaningful measurements that lead to timely learning, corrective actions and improvements are key to support the management of innovation activities in an organization to ensure its survival and beneficial evolution (i.e. enhanced competitiveness for businesses and/or enhanced effectiveness and relevance for public-oriented organizations).
This proposed Tools and Methods standard is complementary to the ISO56002 Innovation Management System standard. It will provide guidance for the definition, implementation, evaluation and further improvement of the measurements necessary to manage effectively innovation operations in an organization.
Specifically, this standard will guide:
- The planning for the alignment of innovation measurements to the organization’s strategy, operational objectives and innovation management system;
- The selection of indicators to measure the progress of innovation activities and performance of the innovation portfolio.
- The design of ways to measure each indicator (via quantitative or qualitative metrics) in a clear and actionable way;
- The choice of frequency and expected performance targets for innovation measurements;
- The provision of necessary support to undertake innovation measurements efficiently and manage their evolution: funding, people, infrastructure, legal aspects, documentation and communications;
- The evaluation of measurement results, taking corrective action, learning and communicating;
- The review and update of the organization’s innovation measurements in terms of effectiveness in achieving intended innovation results and minimizing risks.
The guidelines to innovation measurements provided by this standard will be useful for all types of organizations (irrespective of sector and size) and all types of innovations (independent of time horizons).
This standard provides guidance at a general level. While it gives some examples of measurements in use, it does not prescribe any specific tools, methods for innovation measurements or metrics.

Innovationsmanagement - Werkzeuge und Methoden für die Messung von Innovationsabläufen - Leitfaden (ISO/DIS 56008:2023)

Management de l’innovation - Outils et méthodes pour les mesures des opérations d’innovation - Recommandations (ISO/DIS 56008:2023)

Upravljanje inovacij - Orodja in metode za merjenje delovanja inovacij - Navodilo (ISO/DIS 56008:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 07-May-2023
• ICS: 03.100.01 - Company organization and management in general
• ICS: 03.100.40 - Research and development
• ICS: 03.100.70 - Management systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 07-Feb-2024
• Due Date: 27-Mar-2024
• Ref Project: FprEN ISO 56008 - Innovation management - Tools and methods for innovation operation measurements - Guidance (ISO/FDIS 56008:2024)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 56008:2023
01-april-2023
Upravljanje inovacij - Orodja in metode za merjenje delovanja inovacij - Navodilo
(ISO/DIS 56008:2023)
Innovation management - tools and methods for innovation operation measurements -
Guidance (ISO/DIS 56008:2023)
Innovationsmanagement - Werkzeuge und Methoden für die Messung von
Innovationsabläufen - Leitfaden (ISO/DIS 56008:2023)
Management de l’innovation - Outils et méthodes pour les mesures des opérations
d’innovation - Recommandations (ISO/DIS 56008:2023)
Ta slovenski standard je istoveten z: prEN ISO 56008
ICS:
03.100.40 Raziskave in razvoj Research and development
oSIST prEN ISO 56008:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 56008:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 56008:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 56008
ISO/TC 279 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2023-02-14 2023-05-09
Innovation management — Tools and methods for
innovation operation measurements — Guidance
ICS: 03.100.40; 03.100.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 56008:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 56008:2023
ISO/DIS 56008:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 56008
ISO/TC 279 Secretariat: AFNOR
Voting begins on: Voting terminates on:

Innovation management — Tools and methods for
innovation operation measurements — Guidance
ICS: 03.100.40; 03.100.01
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 56008:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 56008:2023
ISO/DIS 56008:2022(E)
Contents Page
Foreword .v
0. Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...