SIST EN ISO 10325:2018
(Main)Fibre ropes - High modulus polyethylene - 8-strand braided ropes, 12-strand braided ropes and covered ropes (ISO 10325:2018)
Fibre ropes - High modulus polyethylene - 8-strand braided ropes, 12-strand braided ropes and covered ropes (ISO 10325:2018)
This document specifies requirements for 8-strand braided ropes, for 12-strand braided ropes, and for
covered rope constructions for general purpose made of high modulus polyethylene (HMPE), and gives
rules for their designation.
Many different types and grades of HMPE fibre exist which are commonly used to produce rope
products. This document does not cover all variations in strength or product performance. The rope
manufacturer is consulted to ensure the intended design meets the requirements of the application.
Faserseile - Hochmoduliges Polyethylen - 8-litzige geflochtene Seile, 12-litzige geflochtene Seile und ummantelte Seile (ISO 10325:2018)
Dieses Dokument legt Anforderungen für 8-litzige geflochtene Seile, 12-litzige geflochtene Seile und ummantelte Seilaufbauarten für allgemeine Zwecke, die aus hochmoduligen Polyethylen (HMPE) hergestellt sind, fest und gibt die Regeln für ihre Bezeichnung an.
Es existieren viele unterschiedliche Typen und Qualitäten von HMPE-Fasern, die üblicherweise zur Herstellung von Seilprodukten verwendet werden. Dieses Dokument deckt nicht alle Varianten der Festigkeit oder Produktleistung ab. Der Seilhersteller ist zu konsultieren um sicherzustellen dass die beabsichtigte Machart den Anforderungen der Anwendung entspricht.
Cordages en fibres - Polyéthylène à haut module - Cordages tressés à 8 torons, cordages tressés à 12 torons et cordages avec couverture (ISO 10325:2018)
Le présent document spécifie les exigences applicables aux cordages tressés à 8 torons, aux cordages tressés à 12 torons et aux cordages avec couverture pour usage général fabriqués en polyéthylène à haut module (HMPE), et elle précise les règles pour leur désignation.
Il existe de nombreux types et de nombreuses qualités différentes de fibres HMPE qui sont couramment utilisés pour fabriquer des cordages. Le présent document ne couvre pas toutes les variations de résistance ou de performance des produits. Consulter le fabricant du cordage pour s'assurer que la conception prévue satisfait aux exigences de l'application.
Vlaknene vrvi - Visokomodulni polietilen - 8-nitne in 12-nitne pletene vrvi ter oplaščene vrvi (ISO 10325:2018)
Ta dokument določa zahteve za 8-nitne in 12-nitne pletene vrvi ter oplaščene vrvi za splošne namene, izdelane iz visokomodulnega polietilena (HMPE), podaja pa tudi pravila za njihovo označevanje.
Na voljo je veliko različnih vrst in razredov vlaken HMPE, ki se pogosto uporabljajo pri proizvodnji izdelkov iz vrvi. Ta dokument ne obravnava vseh različic glede na moč ali zmogljivost izdelka. Proizvajalec vrvi mora zagotoviti, da projektirana zasnova ustreza zahtevam uporabe.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10325:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 10325:2010
9ODNQHQHYUYL9LVRNRPRGXOQLSROLHWLOHQQLWQHLQQLWQHSOHWHQHYUYLWHU
RSODãþHQHYUYL ,62
Fibre ropes - High modulus polyethylene - 8-strand braided ropes, 12-strand braided
ropes and covered ropes (ISO 10325:2018)
Faserseile - Hochmoduliges Polyethylen - 8-litzige geflochtene Seile, 12-litzige
geflochtene Seile und ummantelte Seile (ISO 10325:2018)
Cordages en fibres - Polyéthylène à haut module - Cordages tressés à 8 torons,
cordages tressés à 12 torons et cordages avec couverture (ISO 10325:2018)
Ta slovenski standard je istoveten z: EN ISO 10325:2018
ICS:
59.080.50 Vrvi Ropes
SIST EN ISO 10325:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10325:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 10325:2018
EN ISO 10325
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2018
EUROPÄISCHE NORM
ICS 59.080.50 Supersedes EN ISO 10325:2009
English Version
Fibre ropes - High modulus polyethylene - 8-strand
braided ropes, 12-strand braided ropes and covered ropes
(ISO 10325:2018)
Cordages en fibres - Polyéthylène à haut module - Faserseile - Hochmoduliges Polyethylen - 8-litzige
Cordages tressés à 8 torons, cordages tressés à 12 geflochtene Seile, 12-litzige geflochtene Seile und
torons et cordages avec couverture (ISO 10325:2018) ummantelte Seile (ISO 10325:2018)
This European Standard was approved by CEN on 2 October 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10325:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10325:2018
EN ISO 10325:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10325:2018
EN ISO 10325:2018 (E)
European foreword
This document (EN ISO 10325:2018) has been prepared by Technical Committee ISO/TC 38 "Textiles"
in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10325:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10325:2018 has been approved by CEN as EN ISO 10325:2018 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10325:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 10325:2018
INTERNATIONAL ISO
STANDARD 10325
Second edition
2018-09
Fibre ropes — High modulus
polyethylene — 8-strand braided
ropes, 12-strand braided ropes and
covered ropes
Cordages en fibres — Polyéthylène à haut module — Cordages tressés
à 8 torons, cordages tressés à 12 torons et cordages avec couverture
Reference number
ISO 10325:2018(E)
©
ISO 2018
---------------------- Page: 7 ----------------------
SIST EN ISO 10325:2018
ISO 10325:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10325:2018
ISO 10325:2018(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Designation fibre ropes . 1
5 Material . 2
6 General requirements . 2
6.1 General . 2
6.2 Construction, manufacture and lay length or braid pitch . 3
6.3 Labelling, packaging, invoicing and delivered lengths . 3
7 Physical properties . 3
8 Marking . 3
© ISO 2018 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 10325:2018
ISO 10325:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 38, Textiles.
This second edition cancels and replaces the first edition (ISO 10325:2009), which has been technically
revised. The main changes compared to the previous edition are as follows:
— Scope: a statement indicating that other commonly used types and grades of HMPE may be out of
the coverage of this document has been added;
— Clause 3: the term “heat-set ropes” has been added;
— Table 1: the linear density and minimum breaking strength values has been mo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.