SIST EN 61753-061-2:2013

Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorised single-mode fibre optic pigtailed isolators for category C - Controlled environment (IEC 61753-061-2:2012)

This part of IEC 61753 contains the minimum test and measurement requirements and severities
which a fibre optic isolator as specified by IEC 61202-1 should satisfy in order to be categorized as meeting the requirements of isolators used in controlled environments as specified in IEC 61753-1. The requirements cover non-connectorized single-mode fibre optic pigtailed isolators for category C used in controlled environments.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 061-2: Nicht mit Steckverbindern versehene Einmoden-Lichtwellenleiter-Isolatoren mit Pigtails der Kategorie C - Kontrollierte Umgebung (IEC 61753-061-2:2012)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 061-2: Isolateurs à fibres optiques unimodales munis de fibres amorces non connectorisées pour la catégorie C - Environnements contrôlés (CEI 61753-061-2:2012)

La CEI 61753-061-2:2012 contient les sévérités et les exigences minimales d'essai et de mesure auxquelles il convient qu'un isolateur à fibres optiques tel que spécifié dans la CEI 61202-1 satisfasse afin d'être classé comme conforme aux exigences des isolateurs utilisés dans des environnements contrôlés spécifiés dans la CEI 61753-1. Mots clé: isolateur à fibres optiques, essai et mesure

Optični spojni elementi in pasivne komponente - Tehnični standard - 061-2. del: Svitkasti cirkulatorji brez konektorjev za enorodna optična vlakna za kategorijo C - Nadzorovano okolje (IEC 61753-061-2:2012)

Ta del standarda IEC 61753 zajema minimalne zahteve za preskuse in meritve ter stopnje zahtevnosti, ki jih morajo v skladu s standardom IEC 61202-1 izpolnjevati cirkulatorji za optična vlakna, da ustrezajo zahtevam cirkulatorjev, ki se uporabljajo v nadzorovanem okolju v skladu s standardom IEC 61753-1. Zahteve obravnavajo svitkaste cirkulatorje brez konektorjev za enorodna optična vlakna za kategorijo C, ki se uporabljajo v nadzorovanem okolju.

General Information

• Status: Withdrawn
• Publication Date: 13-Nov-2012
• Withdrawal Date: 21-May-2023
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-May-2023
• Due Date: 14-Jun-2023
• Completion Date: 22-May-2023
• Ref Project: EN 61753-061-2:2012 - Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators for category C - Controlled environment

Relations

• Replaced By: SIST EN IEC 61753-061-2:2020 - Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C - Controlled environments (IEC 61753-061-2:2020)
• Effective Date: 04-Jun-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-061-2:2013
01-januar-2013
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
6YLWNDVWLFLUNXODWRUMLEUH]NRQHNWRUMHY]DHQRURGQDRSWLþQDYODNQD]DNDWHJRULMR&
1DG]RURYDQRRNROMH,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 061-2: Non-connectorised single-mode fibre optic pigtailed isolators for category C -
Controlled environment (IEC 61753-061-2:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
061-2: Nicht mit Steckverbindern versehene Einmoden-Lichtwellenleiter-Isolatoren mit
Pigtails der Kategorie C - Kontrollierte Umgebung (IEC 61753-061-2:2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 061-2: Isolateurs à fibres optiques unimodales munis de fibres
amorces non connectorisées pour la catégorie C - Environnements contrôlés (CEI 61753
-061-2:2012)
Ta slovenski standard je istoveten z: EN 61753-061-2:2012
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-061-2:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61753-061-2:2013

---------------------- Page: 2 ----------------------

SIST EN 61753-061-2:2013

EUROPEAN STANDARD
EN 61753-061-2

NORME EUROPÉENNE
October 2012
EUROPÄISCHE NORM

ICS 33.180.10


English version


Fibre optic interconnecting devices and passive components -
Performance standard -
Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators
for category C - Controlled environment
(IEC 61753-061-2:2012)


Dispositifs d'interconnexion et composants Lichtwellenleiter - Verbindungselemente
passifs à fibres optiques - und passive Bauteile - Betriebsverhalten -
Norme de performance - Teil 061-2: Nicht mit Steckverbindern
Partie 061-2: Isolateurs à fibres optiques versehene Einmoden-Lichtwellenleiter-
unimodales munis de fibres amorces Isolatoren mit Pigtails der Kategorie C -
non connectorisées pour la catégorie C - Kontrollierte Umgebung
Environnements contrôlés (IEC 61753-061-2:2012)
(CEI 61753-061-2:2012)



This European Standard was approved by CENELEC on 2012-09-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-061-2:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61753-061-2:2013
EN 61753-061-2:2012 - 2 -
Foreword
The text of document 86B/3362/CDV, future edition 1 of IEC 61753-061-2, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-061-2:2012.
The following dates are fixed:
(dop) 2013-06-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-09-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61753-061-2:2012 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61202-1 NOTE Harmonised as EN 61202-1.
IEC 61300-3-38 NOTE Harmonised as EN 61300-3-38.
IEC 61753-1 NOTE Harmonised as EN 61753-1.

---------------------- Page: 4 ----------------------

SIST EN 61753-061-2:2013
- 3 - EN 61753-061-2:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60793-2-50 2008 Optical fibres - EN 60793-2-50 2008
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres


IEC 60794-2-50 - Optical fibre cables - EN 60794-2-50 -
Part 2-50: Indoor cables - Family
specification for simplex and duplex cables
for use in terminated cable assemblies


IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)


IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention


IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock


IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - Optical power handling
and damage threshold characterization


IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)


IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature


IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors

---------------------- Page: 5 ----------------------

SIST EN 61753-061-2:2013
EN 61753-061-2:2012 - 4 -
Publication Year Title EN/HD Year
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief
of fibre optic devices


IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device


IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components


IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements
- Transient loss


IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures -
Part 3-32: Examinations and measurements
- Polarisation mode dispersion measurement
for passive optical components

---------------------- Page: 6 ----------------------

SIST EN 61753-061-2:2013



IEC 61753-061-2

®


Edition 1.0 2012-08




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Fibre optic interconnecting devices and passive components – Performance

standard –

Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators for


category C – Controlled environments



Dispositifs d'interconnexion et composants passifs à fibres optiques – Norme


de performance –

Partie 061-2: Isolateurs à fibres optiques unimodales munis de fibres amorces

non connectorisées pour la catégorie C – Environnements contrôlés










INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX M


ICS 33.180.10 ISBN 978-2-83220-333-0



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61753-061-2:2013
– 2 – 61753-061-2 © IEC:2012
CONTENTS

FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Test . 6
4 Test report . 6
5 Performance requirements . 7
5.1 Sample size . 7
5.2 Test details and requirements . 7
Annex A (normative) Sample size . 11
Bibliography . 12

Table 1 – Single-mode spectral bands . 6
Table 2 – Test details and requirements . 7
Table A.1 – Sample size . 11

---------------------- Page: 8 ----------------------

SIST EN 61753-061-2:2013
61753-061-2 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –

Part 061-2: Non-connectorized single-mode fibre optic
pigtailed isolators for category C – Controlled environments

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct applicatio
...