oSIST prEN 4604-003:2022

Aerospace series - Cable, electrical, for signal transmission – Part 003 : Cable, coaxial, 50 Ohm, 200 °C, type WZ – Product standard

This document specifies the characteristics of a UV laser printable coaxial cable, 50 Ω, type WZ, for use in aircraft electrical systems at operating temperatures between -65 °C and 200 °C and especially for high frequency up to 6 GHz.
The document encloses also a regular and reinforced cable version (code R) which is used for sensitive systems with controlled VSWR.

Luft- und Raumfahrt - Elektrische Leitungen für Signalübertragungen - Teil 003: Koaxialkabel, 50 Ohm, 200 °C, Typ WZ - Produktnorm

Série aérospatiale - Câbles électriques pour transmission de signaux - Partie 003 : Câble coaxial, 50 ohms, 200 °C, type WZ - Norme de produit

Le présent document spécifie les caractéristiques requises d’un câble coaxial marquable au laser UV de 50 Ω, de type WZ, pour utilisation dans les systèmes électriques d’aéronefs à des températures de fonctionnement comprises entre -65 °C et 200 °C, et notamment à haute fréquence jusqu’à 6 GHz.
Le document comprend également une version de câble normale et renforcée (code R) qui est utilisée pour les systèmes sensibles avec un rapport d'ondes stationnaires (VSWR, Voltage Standing Wave Ratio) contrôlé.

Aeronavtika - Kabli, električni, za prenos signala - 003. del: Kabli, koaksialni, 50 ohm, 200 °C, tip WZ - Standard za proizvod

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Sep-2022
• ICS: 29.060.20 - Cables
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 22-Jun-2022
• Due Date: 09-Nov-2022
• Completion Date: 16-Sep-2022
• Ref Project: prEN 4604-003 - Aerospace series - Cable, electrical, for signal transmission – Part 003 : Cable, coaxial, 50 Ohm, 200 °C, type WZ – Product standard

Relations

• Revised: SIST EN 4604-003:2019 - Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 Ohm, 200 °C, type WZ - Product standard
• Effective Date: 31-Mar-2021
• Revised: SIST EN 4604-003:2019 - Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 Ohm, 200 °C, type WZ - Product standard
• Effective Date: 18-Jan-2023
• Revised: SIST EN 4604-003:2019 - Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 Ohm, 200 °C, type WZ - Product standard
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4604-003:2022
01-september-2022
Aeronavtika - Kabli, električni, za prenos signala - 003. del: Kabli, koaksialni, 50
ohm, 200 °C, tip WZ - Standard za proizvod
Aerospace series - Cable, electrical, for signal transmission – Part 003 : Cable, coaxial,
50 Ohm, 200 °C, type WZ – Product standard
Luft- und Raumfahrt - Elektrische Leitungen für Signalübertragungen - Teil 003:
Koaxialkabel, 50 Ohm, 200 °C, Typ WZ - Produktnorm
Série aérospatiale - Câbles électriques pour transmission de signaux - Partie 003 : Câble
coaxial, 50 ohms, 200 °C, type WZ - Norme de produit
Ta slovenski standard je istoveten z: prEN 4604-003
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4604-003:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4604-003:2022

---------------------- Page: 2 ----------------------
oSIST prEN 4604-003:2022


DRAFT
EUROPEAN STANDARD
prEN 4604-003
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2022
ICS Will supersede EN 4604-003:2019
English Version

Aerospace series - Cable, electrical, for signal transmission
- Part 003 : Cable, coaxial, 50 Ohm, 200 °C, type WZ -
Product standard
Série aérospatiale - Câbles électriques pour Luft- und Raumfahrt - Elektrische Leitungen für
transmission de signaux - Partie 003 : Câble coaxial, 50 Signalübertragungen - Teil 003: Koaxialkabel, 50 Ohm,
ohms, 200 °C, type WZ - Norme de produit 200 °C, Typ WZ - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4604-003:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4604-003:2022
prEN 4604-003:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 6
4 Required characteristics . 6
4.1 Material, construction, dimensions and mass . 6
4.2 General characteristics . 7
4.3 Electrical characteristics . 7
5 Quality assurance . 13
6 Designation . 13
7 Identification and marking . 14
8 Packaging, labelling and delivery length . 14
8.1 Packaging and labelling . 14
8.2 Delivery length. 14
9 Technical specification . 14
Annex A (informative) Standard evolution form . 15

2

---------------------- Page: 4 ----------------------
oSIST prEN 4604-003:2022
prEN 4604-003:2022 (E)
European foreword
This document (prEN 4604-003:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 4604-003:2019.
For a list of the changes between prEN 4604-003:2022 and EN 4604-003:2019, see Annex A.
3

---------------------- Page: 5 ----------------------
oSIST prEN 4604-003:2022
prEN 4604-003:2022 (E)
1 Scope
This document specifies the characteristics of a UV laser printable coaxial cable, 50 Ω, type WZ, for use
in aircraft electrical systems at operating temperatures between -65 °C and 200 °C and especially for
high frequency up to 6 GHz.
The document encloses also a regular and reinforced cable version (code R) which is used for sensitive
systems with controlled VSWR.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 3475-100:2010, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
EN 3475-201, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual
examination
EN 3475-202, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass
EN 3475-203, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
EN 3475-301, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance
per unit length
EN 3475-302, Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test
EN 3475-303, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation
resistance
EN 3475-304, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface
resistance
EN 3475-306, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of
conductors
EN 3475-307, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona
extinction voltage
EN 3475-406, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test
EN 3475-407, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407 : Flammability
EN 3475-411, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to
fluids
EN 3475-415, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of
temperature
EN 3475-416, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability
EN 3475-502, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502: Notch
propagation
4

---------------------- Page: 6 ----------------------
oSIST prEN 4604-003:2022
prEN 4604-003:2022 (E)
EN 3475-503, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion
EN 3475-505, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on
conductors and strands
EN 3475-506, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating
continuity
EN 3475-507, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of
plating
EN 3475-508, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
EN 3475-512, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure
endurance
EN 3475-513, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation
resistance (Installation with plastic cable ties)
EN 3475-515, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 515: Crush resistance
EN 3475-601, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density
EN 3475-602, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
EN 3475-701, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and
adherence of insulation to the conductor
EN 3475-702, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback
capability
...