iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 407 S1:2000

(Main)

Safety rules for the use of equipment for electric arc welding and allied processes

Safety rules for the use of equipment for electric arc welding and allied processes

This harmonization document specifies the electrical safety rules applying to industrial/professional use of equipment for electric arc welding and allied processes. Additional or complementary rules governing specific processes (e.g. : plasma welding and cutting) and specific fields of application (e.g. : underwater welding, use of electric arc-welding equipment by laymen) are under consideration. This document does not cover safety aspects concerning eye protection, protection against radiations, fumes, etc...

Sicherheitsregeln für die Verwendung von Ausrüstungen für elektrisches Bogenschweißen und verwandte Verfahren

Règles de sécurité pour l'utilisation de l'équipement électrique de soudage à l'arc et de procédés assimilés

Safety rules for the use of equipment for electric arc welding and allied processes

General Information

Status
Withdrawn
Publication Date
31-Jan-2000
Withdrawal Date
31-Aug-2002
ICS
25.160.30 - Welding equipment
Technical Committee
ETC - Electrotechnical technical committe
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Sep-2002
Due Date
01-Sep-2002
Completion Date
01-Sep-2002
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
HD 407 S1:1980 - Safety rules for the use of equipment for electric arc welding and allied processes

Relations

Revised
SIST CLC/TS 62081:2003 - Arc welding equipment - Installation and use
Effective Date
28-Jan-2023
Revises
SIST CLC/TS 62081:2003 - Arc welding equipment - Installation and use
Effective Date
07-Jun-2022

Buy Standard

HD 407 S1:2000HD 407 S1:2000
PreviousNext
Standardization document
HD 407 S1:2000
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 407 S1:2000
01-februar-2000
Safety rules for the use of equipment for electric arc welding and allied processes
Safety rules for the use of equipment for electric arc welding and allied processes
Sicherheitsregeln für die Verwendung von Ausrüstungen für elektrisches
Bogenschweißen und verwandte Verfahren
Règles de sécurité pour l'utilisation de l'équipement électrique de soudage à l'arc et de
procédés assimilés
Ta slovenski standard je istoveten z: HD 407 S1:1980
ICS:
25.160.30 Varilna oprema Welding equipment
SIST HD 407 S1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62822-3:2023(Main)
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) - Part 3: Resistance welding equipment (IEC 62822-3:2023)
EN IEC 62822-3:2023

IEC 62822-3:2023 applies to equipment for resistance welding and allied processes designed for occupational use by professionals and for use by laymen.
More generally, this document covers equipment for which the welding current flows in an electrical circuit whose geometry cannot be changed and regardless of the technology of the current generator (for example LF-AC, MF-DC for spot or seam welding or capacitive discharge used for stud welding).
This second edition cancels and replaces the first edition published in 2017. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) inclusion of the uncertainties in the results of the assessment;
b) simplification of the methods of exposure assessment.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15615:2023(Main)
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2022)
EN ISO 15615:2022

This document establishes the general specifications, requirements and tests for devices located on the high-pressure side of acetylene manifold systems up to 2,5 MPa (25 bar) as defined in ISO 14114. It does not apply to high-pressure piping, high-pressure flexible hoses or pressure regulators.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60974-1:2023/A11:2023(Amendment)
Arc welding equipment - Part 1: Welding power sources
EN IEC 60974-1:2022/A11:2022

Common Mod in order to cover EU Ecodesign requirements on IEC 60974-1
It is applicable to power sources for arc welding and allied processes designed for INDUSTRIAL AND PROFESSIONAL USE, and supplied by a voltage not exceeding 1 000 V, BATTERY supplied or driven by mechanical means.
This document specifies safety and performance requirements of WELDING POWER SOURCES and PLASMA CUTTING SYSTEMS.
This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6.
This document includes requirements for battery-powered WELDING POWER SOURCES and BATTERY packs, which are given in Annex O.
This document is not applicable to testing of power sources during periodic maintenance or after repair.
NOTE 1 Typical allied processes are electric arc cutting and arc spraying.
NOTE 2 AC systems having a nominal voltage between 100 V and 1 000 V are given in Table 1 of IEC 60038:2009.
NOTE 3 This document does not include electromagnetic compatibility (EMC) requirements.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60974-1:2023(Main)
Arc welding equipment - Part 1: Welding power sources (IEC 60974-1:2021)
EN IEC 60974-1:2022

This part of IEC 60974 is applicable to power sources for arc welding and allied processes designed for INDUSTRIAL AND PROFESSIONAL USE, and supplied by a voltage not exceeding 1 000 V, BATTERY supplied or driven by mechanical means.
This document specifies safety and performance requirements of WELDING POWER SOURCES and PLASMA CUTTING SYSTEMS.
This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6.
This document includes requirements for battery-powered WELDING POWER SOURCES and BATTERY packs, which are given in Annex O.
This document is not applicable to testing of power sources during periodic maintenance or after repair.
NOTE 1 Typical allied processes are electric arc cutting and arc spraying.
NOTE 2 AC systems having a nominal voltage between 100 V and 1 000 V are given in Table 1 of IEC 60038:2009.
NOTE 3 This document does not include electromagnetic compatibility (EMC) requirements.

  • Standard
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60974-14:2019/AC:2022(Corrigendum)
Arc welding equipment - Part 14: Calibration, validation and consistency testing (IEC 60974-14:2018/COR1:2022)
EN IEC 60974-14:2018/AC:2022-02

IEC corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62135-2:2022(Main)
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements (IEC 62135-2:2020)
EN IEC 62135-2:2021

This part of IEC 62135 is applicable to equipment for resistance welding and allied processes
which are connected to mains supplies with rated voltages up to 1 000 V AC RMS. This
document does not define safety requirements.
Resistance welding equipment type tested in accordance with, and which has met the
requirements of, this document, is deemed to be in compliance for all applications.
The frequency range covered is from 0 Hz to 400 GHz.
Arc welding equipment containing a radio receiver or transmitter is within the scope of this
document. Additional requirements for such equipment is specified in Annex D.
The radiated emission requirements in this document are not intended to be applicable to the
intentional transmissions from a radio transmitter as defined by the ITU nor to any spurious
emissions related to these intentional transmitters.
This product EMC standard for resistance welding equipment takes precedence over all
aspects of the generic standards and no additional EMC tests are required or necessary.
NOTE 1 Typical allied processes are resistance hard and soft soldering or resistance heating achieved by means
comparable to resistance welding equipment.
NOTE 2 Limit values are specified for only part of the frequency range.
Resistance welding equipment are classified as Class A and Class B equipment.
This part of IEC 62135 specifies
a) test methods to be used in conjunction with CISPR 11:2015, CISPR 11:2015/AMD1:2016
and CISPR 11:2015/AMD2:2019 to determine radio-frequency (RF) emission;
b) relevant standards and test methods for harmonic current emission, voltage fluctuation
and flicker;
c) additional requirements for equipment powered by internal or external batteries (Annex C).
NOTE 3 The limits in this document cannot, however, provide full protection against interference to radio and
television reception when the resistance welding equipment is used closer than 30 m to the receiving antenna(e).
NOTE 4 In special cases, when highly susceptible apparatus is being used in close proximity, additional
mitigation measures are sometimes employed to further reduce the electromagnetic emissions.
NOTE 5 The origins of the limit values in this document are summarized in Annex A.
This part of IEC 62135 also defines immunity requirements and test methods for continuous
and transient, conducted and radiated disturbances including electrostatic discharges.
NOTE 6 These requirements do not, however, cover extreme cases which are extremely rare.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60974-10:2022(Main)
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements (IEC 60974-10:2020)
EN IEC 60974-10:2021

IEC 60974-10:2014 specifies  a) applicable standards and test methods for radio-frequency (RF) emissions;  b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker;  c) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges.  This standard is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilizing devices. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  - inclusion of optional use of a decoupling network and a load outside the test chamber;  - inclusion of an alternative test setup for portable equipment;  - inclusion of test conditions for complex controls, liquid cooling systems and arc striking and stabilizing devices;  - update of the applicable limits related to the updated reference to CISPR 11;  - exclusion of the use of narrow band relaxations for RF emission limits;  - update of the applicable limits for harmonics and flicker and inclusion of flow-charts related to the updated reference to IEC 61000-3-11 and IEC 61000-3-12;  - update of the requirements for voltage dips related to the updated reference to IEC 61000-4-11 and IEC 61000-4-34;  - update of the informative annex for installation and use;  - inclusion of symbols to indicate the RF equipment class and restrictions for use.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60974-8:2022(Main)
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems (IEC 60974-8:2021)
EN IEC 60974-8:2021

This part of IEC 60974 specifies safety and performance requirements for GAS CONSOLES
intended to be used with combustible gases or oxygen. These GAS CONSOLES are designed to
supply gases for use in arc welding, plasma cutting, gouging and allied processes in nonexplosive atmospheres.
The GAS CONSOLE can be external or internal to the power source enclosure. In the latter case,
the power source shall meet the requirements of both IEC 60974-1 and this document.
NOTE See Annex A for mechanised plasma system diagram

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8167:2021(Main)
Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021)
EN ISO 8167:2021

This document specifies the geometries and dimensions of projections for embossed projection welding.
Tools to make the projections are also included in Annex B.
The projections are used on hot-rolled, cold-rolled, uncoated and coated steels, stainless steels and
nickel alloys for conventional welding quality up to 3 mm thickness, as single projections, in multiples
or as a group of multiples.
Any solid projections are not included in this document.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60974-11:2021(Main)
Arc welding equipment - Part 11: Electrode holders (IEC 60974-11:2021)
EN IEC 60974-11:2021

This part of IEC 60974 is applicable to ELECTRODE HOLDERS for manual metal arc welding with
electrodes up to 10 mm in diameter.
It is not applicable to ELECTRODE HOLDERS for underwater welding.
This document specifies safety and performance requirements of ELECTRODE HOLDERS.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day