iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13843:2003

(Main)

Roller sports equipment - Inline-skates - Safety requirements and test methods

Roller sports equipment - Inline-skates - Safety requirements and test methods

This standard applies to inline-skates intended for users with a body mass of more than 20 kg. It specifies general and safety requirements for inline-skates to reduce the risk of injuries to both third parties and the user during their normal use. Inline-skates for use by a rider of less than 20 kg do not belong to the scope of this EN. They are covered by EN 71-1. This EN does not apply to roller skates.

Rollsportgeräte - Inline-skates - Sicherheitstechnische Anforderungen und Prüfverfahren

Diese Norm gilt für Inline-Skates für Benutzer mit einem Körpergewicht von mehr als 20 kg. Sie legt die sicherheitstechnischen Mindest-Anforderungen an Inline-Skates fest, Festlegungen für Prüfverfahren, Kennzeichnung und Benutzerinformation, die bei bestimmungsgemäßer Anwendung die Verletzungsgefahr für Dritte und die Benutzer verringern sollen. Inline-Skates für einen Läufer von weniger als 20 kg gehören nicht zum Anwendungsbereich dieser EN. Sie werden durch EN 71-1 erfaßt. Diese EN gilt nicht für Rollschuhe.

Equipements de sports a roulettes - Patins a roues en ligne - Exigences de sécurité et méthodes d'essais

La présente norme s'applique aux patins à roues en ligne destinés aux utilisateurs dont le poids est supérieur à 20 kg et inférieur à 100 kg.
Elle spécifie les exigences de sécurité minimales relatives aux patins à roues en ligne, les spécifications relatives aux méthodes d'essai, le marquage et les informations fournies par le fabricant afin de réduire le risque de blessures pouvant toucher les tiers ou l'utilisateur en cours d'utilisation normale.
Les patins à roues en ligne destinés à être utilisés par un utilisateur dont le poids est inférieur à 20 kg n'entrent pas dans le domaine d'application de la présente Norme européenne. Ils sont des jouets.
La présente Norme européenne ne s'applique pas aux patins à roulettes selon EN 13899.

Oprema za športe na koleščkih – Rolerji – Varnostne zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
30-Jun-2003
Withdrawal Date
17-May-2009
ICS
97.220.40 - Outdoor and water sports equipment
Technical Committee
SPO - Sports
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
15-May-2009
Due Date
07-Jun-2009
Completion Date
18-May-2009
Ref Project
EN 13843:2003 - Roller sports equipment - Inline-skates - Safety requirements and test methods

Relations

Replaced By
SIST EN 13843:2009 - Roller sports equipment - Inline-skates - Safety requirements and test methods
Effective Date
01-Jul-2009

Buy Standard

EN 13843:2003EN 13843:2003
PreviousNext
Standard
EN 13843:2003
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rollsportgeräte - Inline-skates - Sicherheitstechnische Anforderungen und PrüfverfahrenEquipements de sports a roulettes - Patins a roues en ligne - Exigences de sécurité et méthodes d'essaisRoller sports equipment - Inline-skates - Safety requirements and test methods97.220.40Oprema za športe na prostem in vodne športeOutdoor and water sports equipmentICS:Ta slovenski standard je istoveten z:EN 13843:2003SIST EN 13843:2003en01-julij-2003SIST EN 13843:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13843February 2003ICS 97.220.40English versionRoller sports equipment - Inline-skates - Safety requirementsand test methodsEquipements de sport à roulettes - Patins à roulettes enligne - Exigences de sécurité et méthodes d'essaisRollsportgeräte - Inline-skates - SicherheitstechnischeAnforderungen und PrüfverfahrenThis European Standard was approved by CEN on 28 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13843:2003 ESIST EN 13843:2003
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 25649-3:2025(Main)
Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2024)
EN ISO 25649-3:2024

This document specifies additional specific safety requirements and test methods for Class A floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class A floating leisure articles as specified in ISO 25649-1:2024, Table 1.
NOTE 1        Typical products in Class A (see Figures A.1 to A.3):
—      “Floating Islands” in near round or square shaped forms decorated with palm tree, sun shade, etc. high superstructure;
—      large floats/rafts in various shapes, from round to square;
—      large floating tubes, giant tubes (inflatable or inherently buoyant);
—      floating arm chairs, seats and sun beds;
—      air mattresses for use on the water;
—      recreational rafts/floating platforms/pontoons.
NOTE 2        Typical places for application:
—      pools;
—      protected areas of lakes, ponds;
—      protected area sea shore (no offshore winds, no currents).

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-2:2025(Main)
Floating leisure articles for use on and in the water - Part 2: Consumer information (ISO 25649-2:2024)
EN ISO 25649-2:2024

This document specifies consumer information for classified floating leisure articles for use on and in water according to ISO 25649-1:2024.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-5:2025(Main)
Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2024)
EN ISO 25649-5:2024

This document specifies additional specific safety requirements and test methods for Class C floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class C floating leisure articles as specified in ISO 25649-1:2024, Table 1.
NOTE 1        Typical products forming Class C (see Annex B):
—      tube riders towable with interior holding facility and closed cockpit;
—      raft riders towable;
—      board riders towable;
—      banana type towable.
NOTE 2        Typical places for application:
—      distant from bathing areas and other frequented water surfaces, wide empty spaces, dedicated racetracks (parcours);
—      no to little waves;
—      no strong currents.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-1:2025(Main)
Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2024)
EN ISO 25649-1:2024

This document specifies general safety requirements and test methods related to materials, safety and performance for classified floating leisure articles for use on and in water.
This document is not applicable to:
—     aquatic toys (use in shallow waters/use under supervision);
—     inflatable boats with a buoyancy > 1 800 N;
—     buoyant aids for swimming instructions;
—     air mattresses that are not specifically designed or intended for use on the water (e.g. velour bed, self-inflating mattress and rubberized cotton air mattress);
—     floating seats for angling purposes;
—     surf sports type devices (e.g. body boards, surf boards, stand-up-paddles boards);
—     water ski, wakeboard or kite surfing board;
—     devices made from rigid materials e.g. wood, aluminium, hard or non-deformable plastic;
—     devices that are kept in shape by permanent air flow;
—     rings intended for use on water slides;
—     wading devices.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-7:2025(Main)
Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices (ISO 25649-7:2024)
EN ISO 25649-7:2024

This document specifies additional specific safety requirements and test methods for Class E floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class E floating leisure articles as specified in ISO 25649-1:2024, Table 1.
Class E devices are inflatable boats of a buoyancy of less than 1 800 N with a hull length of more than 1,2 m and less than 2,5 m.
Class E devices are intended for use in bathing areas or in protected and safe shore zones.
NOTE 1        Typical products forming Class E (see Annex F):
—      inflatable boats for rowing or paddling of near oval shape with or without transom;
—      canoes and kayaks;
—      inflatable boats made from plastic sheets or from reinforced materials;
—      motor kit/sail kit as additional option.
NOTE 2        Typical applications of Class E devices:
—      moving from one place to another for pleasure purposes;
—      staying on the water for relaxing;
—      moving from shore to the main boat, transportation of persons and load (tender boat).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-4:2025(Main)
Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2024)
EN ISO 25649-4:2024

This document specifies additional specific safety requirements and test methods for Class B floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class B floating leisure articles as specified in ISO 25649-1:2024, Table 1.
Class B devices provide a buoyant structure with one or more body openings into which the user is positioned partly immersed.
NOTE 1        Typical products in Class B (see Annex B):
—      floating rafts with interior body holding system (“swim seats”) mostly in circular or square shape, fantasy shape for playing purposes;
—      floating fantasy shaped structures with one or more openings to host a child’s body, with or without body holding system;
—      floating with slits or openings to put legs through any shape;
—      floating rings with interior seat segments inside the circular body opening.
NOTE 2        Typical places for application:
—      pools;
—      protected areas of lakes, ponds;
—      protected areas of sea shore (no offshore winds, no currents).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-6:2025(Main)
Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2024)
EN ISO 25649-6:2024

This document specifies safety requirements and test methods related to materials, safety, performance and consumer information for classified floating leisure articles for use on and in the water according to ISO 25649-1:2024.
This document is applicable to Class D floating leisure articles for use on and in water according to ISO 25649-1:2024 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
NOTE 1        Typical products forming Class D (see Figure A.1 and Figure A.2):
—      inflatable climbing structures on the water;
—      bouncing platforms;
—      inflatable slides;
—      water trampolines;
—      teeter totters;
—      obstacle courses.
NOTE 2        Typical places for application:
—      pools;
—      lakes, ponds;
—      open sea;
—      sea shore (no offshore winds, no currents).

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17109:2020+A1:2024(Main + Amendment)
Mountaineering equipment - Individual safety systems for rope courses - Safety requirements and test methods
EN 17109:2020+A1:2024

This document specifies safety requirements and test methods for components of an individual safety system for protection against a fall from height used in permanent and mobile rope courses as defined in EN 15567-1:2015+A1:2020.
The products considered in this document are not intended to limit, by themselves, the deceleration of the fall of the user, as defined in EN 15567-1:2015+A1:2020. For this requirement, it is essential to consider the whole ropes course system.
Safety lines and harnesses are not covered in this document.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 958:2024(Main)
Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods
EN 958:2024

This document specifies safety requirements and test methods for energy absorbing systems (EAS) for use on suitable via ferrata (e.g. EN 16869:2017), for users weighing not less than 40 kg (total weight without equipment) and no more than 120 kg (total weight including the equipment).
NOTE   This document is one of a package of standards for mountaineering equipment, see Annex A.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 564:2023(Main)
Mountaineering equipment - Accessory cords - Safety requirements and test methods
EN 564:2023

This document specifies safety requirements and test methods for accessory cords, supplied on a drum or in separate lengths, for use in mountaineering including climbing.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day