SIST EN IEC 61300-3-45:2023
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors (IEC 61300-3-45:2023)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors (IEC 61300-3-45:2023)
IEC 61300-3-45:2023 is available as IEC 61300-3-45:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61000-3-45:2023 describes the procedure required to measure the statistical distribution and mean attenuation for random mated optical connectors with physical contact (PC) and angled physical contact (APC) polished multi-fibre rectangular ferrules as defined in the IEC 61754 series. This measurement method is applicable to cable assemblies. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of sample size for > 12-fibre connector measurement;
b) inclusion of guidance for multimode measurement.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-45: Untersuchungen und Messungen - Dämpfung von zufällig gesteckten Mehrfasersteckverbindern (IEC 61300-3-45:2023)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-45: Examens et mesures - Affaiblissement dû à l'accouplement de connecteurs quelconques multifibres (IEC 61300-3-45:2023)
IEC 61300-3-45:2023 est disponible sous forme de IEC 61300-3-45:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 61000-3-45:2023 décrire la procédure exigée pour mesurer la distribution statistique et l’affaiblissement moyen des connecteurs optiques accouplés sans choix préalable avec férules rectangulaires polies multifibres à contact physique (PC), et à contact physique avec angle (APC), comme défini dans la série IEC 61754. Cette méthode de mesure s’applique aux câbles assemblés. Cette seconde édition annule et remplace la première édition parue en 2011. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) ajout nombre d’échantillons pour la mesure de connecteurs à plus de 12 fibres;
b) ajout de recommandations pour les mesures multimodales.
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-45. del: Preiskave in meritve - Slabljenje naključno spojenih večvlakenskih konektorjev (IEC 61300-3-45:2023)
Standard IEC 61300-3-45:2023 je na voljo kot IEC 61300-3-45:2023, ki vsebuje mednarodni standard in njegovo različico z revizijami, ki prikazujejo vse spremembe tehnične vsebine v primerjavi s prejšnjo izdajo. Standard IEC 61000-3-45:2023 opisuje postopek za merjenje statistične porazdelitve in srednjega slabljenja pri naključno spojenih večvlakenskih konektorjih s poliranimi večvlakenskimi pravokotnimi tulkami s fizičnim kontaktom (PC) in fizičnim kontaktom pod kotom (APC), kot določa skupina standardov IEC 61754. Ta merilna metoda se uporablja za kabelske sestave. Druga izdaja razveljavlja in nadomešča prvo izdajo, objavljeno leta 2011. Ta izdaja je tehnično popravljena izdaja. Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
a) dodana je velikost vzorca za merjenje konektorjev z več kot 12 vlakni;
b) vključena so navodila za merjenje večrodnosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61300-3-45:2023
01-oktober-2023
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 3-45. del: Preiskave in meritve - Slabljenje naključno spojenih
večvlakenskih konektorjev (IEC 61300-3-45:2023)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-45: Examinations and measurements - Attenuation of
random mated multi-fibre connectors (IEC 61300-3-45:2023)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-45: Untersuchungen und Messungen - Dämpfung von zufällig
gesteckten Mehrfasersteckverbindern (IEC 61300-3-45:2023)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 3-45: Examens et mesures -
Affaiblissement dû à l'accouplement de connecteurs quelconques multifibres (IEC 61300
-3-45:2023)
Ta slovenski standard je istoveten z: EN IEC 61300-3-45:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61300-3-45:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61300-3-45:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 61300-3-45:2023
EUROPEAN STANDARD EN IEC 61300-3-45
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2023
ICS 33.180.20 Supersedes EN 61300-3-45:2011
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 3-45:
Examinations and measurements - Attenuation of random mated
multi-fibre connectors
(IEC 61300-3-45:2023)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-
mesures - Partie 3-45: Examens et mesures - 45: Untersuchungen und Messungen - Dämpfung von
Affaiblissement dû à l'accouplement sans choix préalable zufällig gesteckten Mehrfasersteckverbindern
de connecteurs multifibres (IEC 61300-3-45:2023)
(IEC 61300-3-45:2023)
This European Standard was approved by CENELEC on 2023-08-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61300-3-45:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61300-3-45:2023
EN IEC 61300-3-45:2023 (E)
European foreword
The text of document 86B/4757/FDIS, future edition 2 of IEC 61300-3-45, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-3-45:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-05-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-08-01
document have to be withdrawn
This document supersedes EN 61300-3-45:2011 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of
...
SLOVENSKI STANDARD
oSIST prEN IEC 61300-3-45:2022
01-april-2022
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 3-45. del: Preiskave in meritve - Slabljenje naključno spojenih
večvlakenskih konektorjev
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-45: Examinations and measurements - Attenuation of
random mated multi-fibre connectors
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-45: Untersuchungen und Messungen - Dämpfung von zufällig
gesteckten Mehrfasersteckverbindern
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 3-45: Examens et mesures -
Affaiblissement dû à l'accouplement de connecteurs quelconques multifibres
Ta slovenski standard je istoveten z: prEN IEC 61300-3-45:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61300-3-45:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61300-3-45:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61300-3-45:2022
86B/4569/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61300-3-45 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-01-28 2022-04-22
SUPERSEDES DOCUMENTS:
86B/4359/CD, 86B/4415A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Fibre optic interconnecting devices and passive components - Basic test and measurement
procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-
fibre connectors
PROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:
Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61300-3-45:2022
IEC CDV 61300-3-45/Ed2 IEC:2022 – 2 – 86B/4569/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 General description . 5
8 4.1 Test methods . 5
9 4.2 Precautions. 7
10 5 Apparatus . 7
11 5.1 Launch conditions and light source (LS) . 7
12 5.2 Detector (D) . 8
13 6 Procedure . 8
14 6.1 Method 1 .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.