Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C

This standard specifies the characteristics of one lug, floating, self-aligning anchor nuts with a self-locking feature achieved by forming the upper portion out of round, in steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa1 / 235 °C2.

Luft- und Raumfahrt - Annietmuttern, selbstsichernd, schwenkbar, einstellbar, einseitiger Flansch, aus Stahl, verkadmet, MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur)/235 °C

Diese Norm legt die Merkmale von schwenk- und einstellbaren Annietmuttern mit einseitigem Flansch, selbstsichernd durch ovale Formgebung des oberen Teils, aus verkadmetem Stahl, MoS2-geschmiert, fest.
Klasse: 900 MPa  ) / 235 °C  )

Série aérospatiale - Écrous à river, à freinage interne, flottants, orientables, simple patte, en acier, cadmiés, lubrifiés MoS2 - Classification: 900 MPa (à température ambiante)/235 °C

Aeronavtika - Zakovne matice, samozapiralne, premične, samovarovalne, enostranske, iz jekla, kadmirane, mazane z MoS2 - Klasifikacija: 900 MPa (pri temperaturi okolice)/235 °C

Ta standard določa značilnosti enostranske premične zakovne matice z izvrtino za vijake in s samozapiralno funckijo, ki je dosežena tako, da je zgornji del oblikovan rahlo ovalno, iz kadmiranega jekla in mazanih z MoS2. Klasifikacija: 900 Mpa1 / 235 °C2.

General Information

Status
Published
Publication Date
01-Feb-2010
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2010
Due Date
08-Apr-2010
Completion Date
02-Feb-2010

Buy Standard

Standard
SIST EN 3653:2010
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.OQHLuft- und Raumfahrt - Annietmuttern, selbstsichernd, schwenkbar, einstellbar, einseitiger Flansch, aus Stahl,

verkadmet, MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur)/235 °CSérie aérospatiale - Écrous à river, à freinage interne, flottants, orientables, simple patte, en acier, cadmiés, lubrifiés MoS2 - Classification: 900 MPa (à température ambiante)/235 °CAerospace series - Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 3653:2010SIST EN 3653:2010en,de01-marec-2010SIST EN 3653:2010SLOVENSKI

STANDARD
SIST EN 3653:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3653
January 2010 ICS 49.030.30 English Version

Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C

Série aérospatiale - Écrous à river, à freinage interne, flottants, orientables, simple patte, en acier, cadmiés, lubrifiés MoS2 - Classification: 900 MPa (à température ambiante) / 235 °C

Luft- und Raumfahrt - Annietmuttern, selbstsichernd, schwenkbar, einstellbar, einseitiger Flansch, aus Stahl,

verkadmet, MoS2-geschmiert - Klasse : 900 MPa (bei Raumtemperatur) / 235 °C This European Standard was approved by CEN on 4 December 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3653:2010: ESIST EN 3653:2010

EN 3653:2010 (E) 2 Contents Page Foreword ..............................................................................................................................................................31Scope ......................................................................................................................................................42Normative references ............................................................................................................................43Required characteristics .......................................................................................................................44Designation ............................................................................................................................................75Marking ...................................................................................................................................................76Technical specification .........................................................................................................................7 SIST EN 3653:2010

EN 3653:2010 (E) 3 Foreword This document (EN 3653:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2010, and conflicting national standards shall be withdrawn at the latest by July 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.