oSIST prEN IEC 60966-4-1:2022
(Main)Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 4-1: Vordruck für Bauartspezifikation für halbstarre konfektionierte Koaxialkabel
Cordons coaxiaux et cordons pour fréquences radioélectriques – Partie 4-1: Spécification particulière-cadre pour cordons coaxiaux semi-rigides
Sestavi radiofrekvenčnih in koaksialnih kablov - 4-1. del: Okvirna podrobna specifikacija za sestave poltogih koaksialnih kablov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60966-4-1:2022
01-september-2022
Sestavi radiofrekvenčnih in koaksialnih kablov - 4-1. del: Okvirna podrobna
specifikacija za sestave poltogih koaksialnih kablov
Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for
semi-rigid coaxial cable assemblies
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 4-1: Vordruck für
Bauartspezifikation für halbstarre konfektionierte Koaxialkabel
Cordons coaxiaux et cordons pour fréquences radioélectriques – Partie 4-1:
Spécification particulière-cadre pour cordons coaxiaux semi-rigides
Ta slovenski standard je istoveten z: prEN IEC 60966-4-1:2022
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
oSIST prEN IEC 60966-4-1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60966-4-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60966-4-1:2022
46/887/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60966-4-1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-06-03 2022-08-26
SUPERSEDES DOCUMENTS:
46/862/CD, 46/881/CC
IEC TC 46 : CABLES, WIRES, WAVEGUIDES, RF CONNECTORS, RF AND MICROWAVE PASSIVE COMPONENTS AND
ACCESSORIES
SECRETARIAT: SECRETARY:
United States of America Mr David Wilson
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 46A
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid
coaxial cable assemblies
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60966-4-1:2022
IEC CDV 60966-4-1 © IEC 2022 2 46/887/CDV
1 Radio frequency and coaxial cable assemblies
2 Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
3
4 1 Scope
5 This part of IEC 60966 is a blank detail specification that relates to semi-rigid coaxial cable
6 assemblies operating in the transverse electromagnetic mode (TEM).
7
8 The creation of a uniform layout and style of detail specifications is determined by the use of
9 a blank detail specification pro forma. The detail specification may be prepared by the
10 insertion of data into the pro forma by a national standards organization, by an approved
11 manufacturer or by a user (when prepared by a user, the detail specification shall be
12 submitted to the national authorized institution by an approved manufacturer).
13 2 Normative references
14 The following documents are referred to in the text in such a way that some or all of their
15 content constitutes requirements of this document. For dated references, only the edition
16 cited applies. For undated references, the latest edition of the referenced document (including
17 any amendments) applies.
18 IEC60966-1:2019, Radio frequency and coaxial cable assemblies – Part 1: Generic specification – General
19 requirements and test methods.
20 IEC 60966-4, Radio frequency and coaxial cable assemblies – Part 4: Sectional specification forsemi-rigid
21 coaxial cable assemblies.
22 IEC 60966-4-1, Radio frequency and coaxial cable assemblies – Part 4-1: Blank detail specification
23 forsemi-rigid coaxial cable assemblies.
24 3 Terms and definitions
25 No terms and definitions are listed in this document.
26 ISO and IEC maintain terminological databases for use in standardization at the following addresses:
27 IEC Electropedia: available at http://www.electropedia.org/
28 ISO Online browsing platform: available at http://www.iso.org/obp
29 4 Instructions
30 Instructions to complete a blank detail specification detail specifications shall, as far as
31 possible, be written in accordance with the pro forma which has:
32
33 a) a front page with a general description and a drawing or isometric sketch of the cable
34 assembly and its possible variants;
35 b) ratings, characteristics and inspection requirements (those which are not required or
36 specified shall be omitted).
37
38 The numbers shown in brackets on this and the following pages correspond to the following
39 items of required information, which should be entered in the spaces provided.
40 [1] Name and address of the organization that has prepared the document.
41 [2] IEC document number, issue number and date of issue.
42 [3] Address of the organization from which the document is available.
43 [4] Related documents.
44 [5] Any other reference to the cable assembly, national reference, trade name, etc.
45 [6] A drawing of the cable assembly giving the outline and dimensions in millimeter.
---------------------- Page: 4 ----------------------
oSIST prEN IEC 60966-4-1:2022
46/887/CDV 3 IEC CDV 60966-4-1 © IEC 2022
46 [7] The relative position dimensions of the interface
47 [8] Maximum diameter of semi-rigid cable
48 [9] Minimum bending inside diameter
49 [10] Nominal characteristic impedance of the cable assembly.
50 [11] Frequency range of use of the cable assembly.
51 [12] Weight, function of the length of the cable assembly.
52 [13] Climatic category of the cable assembly related to IEC 60068.
53 [14] Description, if applicable, of the components used for the manufacture of the cable
54 assembly.
55 [15] Variants of the cable assembly may be listed in one detail specification. The variants
56 may differ by colour, connector material, connector sex or type. (Inspection for quality
57 conformance will be the same for all variants whereas the ratings and characteristics can
58 change.)
59 [16] Subclause, which shall be the same as that in the sectional specifications.
60 [17] Inspection values, ratings or characteristics of the cable assembly. The properties not
61 specified shall be omitted.
62 [18] Reference to the appropriate subclause in the generic specifications.
63 [19] The value either guaranteed or used for the defined test.
64 [20] All information required by the sectional specification and any remarks considered as
65 important for understanding the test.
66 5
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.