SIST EN 60534-3-2:2002

Industrial-process control valves -- Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves

Gives the overall lengths of following types: segmental ball, eccentric rotary plug, and barstock globe; wafer butterfly valves are excluded.

Stellventile für die Prozessregelung -- Teil 3-2: Maße - Einbaulängen von drehenden Stellventilen mit Ausnahme von Klappen

Vannes de régulation des processus industriels -- Partie 3-2: Dimensions - Dimensions face-à-face des vannes de régulation rotatives excepté les vannes papillon

Gives the overall lengths of following types: segmental ball, eccentric rotary plug, and barstock globe; wafer butterfly valves are excluded.

Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001)

General Information

• Status: Published
• Publication Date: 31-May-2002
• ICS: 23.060.40 - Pressure regulators
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: MKP - Industrial-process measurement and control
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2002
• Due Date: 01-Jun-2002
• Completion Date: 01-Jun-2002
• Ref Project: EN 60534-3-2:2001 - Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60534-3-2:2002
01-junij-2002
Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions
for rotary control valves except butterfly valves (IEC 60534-3-2:2001)
Industrial-process control valves -- Part 3-2: Dimensions - Face-to-face dimensions for
rotary control valves except butterfly valves
Stellventile für die Prozessregelung -- Teil 3-2: Maße - Einbaulängen von drehenden
Stellventilen mit Ausnahme von Klappen
Vannes de régulation des processus industriels -- Partie 3-2: Dimensions - Dimensions
face-à-face des vannes de régulation rotatives excepté les vannes papillon
Ta slovenski standard je istoveten z: EN 60534-3-2:2001
ICS:
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 60534-3-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60534-3-2:2002

---------------------- Page: 2 ----------------------

SIST EN 60534-3-2:2002
EUROPEAN STANDARD EN 60534-3-2
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2001
ICS 23.060.40; 25.040.40
English version
Industrial-process control valves
Part 3-2: Dimensions –
Face-to-face dimensions for rotary control valves
except butterfly valves
(IEC 60534-3-2:2001)
Vannes de régulation des processus Stellventile für die Prozessregelung
industriels Teil 3-2: Maße –
Partie 3-2: Dimensions – Einbaulängen von drehenden
Dimensions face-à-face des vannes Stellventilen mit Ausnahme von Klappen
de régulation rotatives excepté (IEC 60534-3-2:2001)
les vannes papillon
(CEI 60534-3-2:2001)
This European Standard was approved by CENELEC on 2001-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60534-3-2:2001 E

---------------------- Page: 3 ----------------------

SIST EN 60534-3-2:2002
EN 60534-3-2:2001 - 2 -
Foreword
The text of document 65B/431/FDIS, future edition 2 of IEC 60534-3-2:2001, prepared by SC 65B,
Devices, of IEC TC 65, Industrial-process measurement and control, was submitted to the IEC-
CENELEC parallel vote and was approved by CENELEC as EN 60534-3-2 on 2001-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-06-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60534-3-2:2001 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60534-3-2:2002
- 3 - EN 60534-3-2:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60534 Series Industrial process control valves EN 60534 Series
1) 2)
ISO 6708 - Pipework components - Definition and EN ISO 6708 1995
selection of DN (nominal size)
ISO 7005 Series Metallic flanges - -
1)
ISO 7268 - Pipe components - Definition of nominal--
pressure
- - Flanges and their joints EN 1092 Series

1)
undated reference.
2)
valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 60534-3-2:2002

---------------------- Page: 6 ----------------------

SIST EN 60534-3-2:2002
NORME CEI
INTERNATIONALE IEC
60534-3-2
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2001-04
Vannes de régulation des processus industriels –
Partie 3-2:
Dimensions – Dimensions face-à-face des vannes
de régulation rotatives excepté les vannes papillon
Industrial-process control valves –
Part 3-2:
Dimensions – Face-to-face dimensions
for rotary control valves except butterfly valves
 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
F
PRICE CODE
International Electrotechnical Commission
...