iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 16831:2024

(Main)

Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic equipment for the determination of thickness (ISO/DIS 16831:2024)

Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic equipment for the determination of thickness (ISO/DIS 16831:2024)

ISO 16831:2012 specifies methods and acceptance criteria for assessing the performance of instruments for measuring thickness using pulse-echo ultrasound.
ISO 16831:2012 covers both direct (digital) reading and waveform display types using single or dual element probes.
ISO 16831:2012 can be used for verifying equipment covered by EN 12668 when used for thickness measurement.

Zerstörungsfreie Prüfung - Ultraschallprüfung - Charakterisierung und Verifizierung der Ultraschall-Prüfausrüstung zur Dickenbestimmung (ISO/DIS 16831:2024)

Essais non destructifs - Contrôle par ultrasons - Caractérisation et vérification des appareils de contrôle par ultrasons pour la détermination de l’épaisseur (ISO/DIS 16831:2024)

Neporušitvene preiskave - Ultrazvočne preiskave - Karakterizacija in preverjanje ultrazvočne opreme za določanje debeline (ISO/DIS 16831:2024)

General Information

Status
Not Published
Public Enquiry End Date
14-Jul-2024
ICS
19.100 - Non-destructive testing
Technical Committee
PKG - Testing of metallic materials
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
08-May-2024
Due Date
25-Sep-2024
Ref Project
prEN ISO 16831 - Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic equipment for the determination of thickness (ISO/DIS 16831:2024)

Relations

Revises
SIST EN 15317:2014 - Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
Effective Date
22-Jan-2023

Buy Standard

prEN ISO 16831:2024prEN ISO 16831:2024
PreviousNext
Draft
prEN ISO 16831:2024
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16831:2024
01-julij-2024
Neporušitvene preiskave - Ultrazvočne preiskave - Karakterizacija in preverjanje
ultrazvočne opreme za določanje debeline (ISO/DIS 16831:2024)
Non-destructive testing - Ultrasonic testing - Characterization and verification of
ultrasonic equipment for the determination of thickness (ISO/DIS 16831:2024)
Zerstörungsfreie Prüfung - Ultraschallprüfung - Charakterisierung und Verifizierung der
Ultraschall-Prüfausrüstung zur Dickenbestimmung (ISO/DIS 16831:2024)
Essais non destructifs - Contrôle par ultrasons - Caractérisation et vérification des
appareils de contrôle par ultrasons pour la détermination de l’épaisseur (ISO/DIS
16831:2024)
Ta slovenski standard je istoveten z: prEN ISO 16831
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
oSIST prEN ISO 16831:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16831:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16831:2024
DRAFT
International
Standard
ISO/DIS 16831
ISO/TC 135/SC 3
Non-destructive testing —
Secretariat: DIN
Ultrasonic testing —
Voting begins on:
Characterization and verification
2024-05-02
of ultrasonic equipment for the
Voting terminates on:
determination of thickness
2024-07-25
ICS: 19.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 16831:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16831:2024
DRAFT
ISO/DIS 16831:2024(en)
International
Standard
ISO/DIS 16831
ISO/TC 135/SC 3
Non-destructive testing —
Secretariat: DIN
Ultrasonic testing —
Voting begins on:
Characterization and verification
of ultrasonic equipment for the
Voting terminates on:
determination of thickness
ICS: 19.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 16831:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16831:2024
ISO/DIS 16831:2024(en)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and defin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 5580:2024(Main)
Non-destructive testing - Industrial radiographic illuminators - Minimum requirements (ISO 5580:2023)
EN ISO 5580:2023

The function of an industrial radiographic illuminator is to provide sufficient diffuse light for viewing
of developed radiographic films (radiographs).
This document specifies the minimum requirements for industrial radiographic illuminators used for
viewing radiographs.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7963:2023(Main)
Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
EN ISO 7963:2022

This document specifies the requirements for the dimensions, material, manufacture and methods of
use for calibration block No. 2 for setting and checking ultrasonic test equipment.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18563-1:2022(Main)
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022)
EN ISO 18563-1:2022

This document specifies the functional characteristics of multi-channel ultrasonic phased array
instruments used for array probes and provides methods for their measurement and verification.
This document is also applicable to ultrasonic phased array instruments in automated systems; but
other tests can be needed to ensure satisfactory performance. When the phased array instrument is a
part of an automated system, the acceptance criteria can be modified by agreement between the parties
involved.
This document also can partly be applicable to FMC instruments and TFM instruments.
This document gives the extent of the verification and defines acceptance criteria within a frequency
range of 0,5 MHz to 10 MHz.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17391:2022(Main)
Non-destructive testing - Acoustic emission testing - Inservice acoustic emission monitoring of metallic pressure equipment and structures - General requirements
EN 17391:2022

This standard describes acoustic emission (AE) monitoring for in service detection, location and grading of AE sources with application to metallic pressure equipment and structures. The monitoring can be periodic, temporary or continuous, on site or remote controlled, supervised or automated. The objectives of AE monitoring are to define regions which are acoustically active as a result of damage or defect evolution.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17501:2022(Main)
Non-destructive testing - Thermographic testing - Active thermography with laser excitation
EN 17501:2022

This document determines the guidelines and the specifications for non-destructive testing using active thermography with laser excitation.
Active thermography with laser excitation is mainly applicable, but not limited to different materials (e.g. composites, metals, ceramics) and to:
-   the detection of surface-breaking discontinuities, particularly cracks;
-   the detection of discontinuities located just below the surface or below coatings with an efficiency that diminishes rapidly with a few mm depth;
-   the detection of disbonds and delamination parallel to the examined surface;
-   the measurement of thermal material properties, like thermal diffusivity;
-   the measurement of coating thickness.
The requirements for the equipment, for the verification of the system, for the surface condition of the part to be tested, for the scanning conditions, for the recording, the processing and the interpretation of the results are specified. Acceptance criteria are not defined.
Active thermography with laser excitation can be applied in industrial production as well as in maintenance and repair (vehicle parts, engine parts, power plant, aerospace, etc.).

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9712:2022(Main)
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2022)
EN ISO 9712:2022

This document specifies requirements for the qualification and certification of personnel who perform
industrial non-destructive testing (NDT) in the following methods.
a) acoustic emission testing;
b) eddy current testing;
c) leak testing (hydraulic pressure tests excluded);
d) magnetic testing;
e) penetrant testing;
f) radiographic testing;
g) strain gauge testing;
h) thermographic testing;
i) ultrasonic testing;
j) visual testing (direct unaided visual tests and visual tests carried out during the application of
another NDT method are excluded).
The system specified in this document is also applicable to other NDT methods or to NDT techniques
within an established NDT method, provided a comprehensive scheme of certification exists and
the NDT method or NDT technique is covered by international, regional or national standards or the
NDT method or the NDT technique has been demonstrated to be effective to the satisfaction of the
certification body.
NOTE 1 The term "industrial" implies the exclusion of applications in the field of medicine.
NOTE 2 CEN/TR 14748 provides guidance on the methodology for qualification of non-destructive tests.
NOTE 3 This document specifies requirements for what are, in effect, third party conformity assessment
schemes. These requirements do not directly apply to conformity assessment by second or first parties, but
relevant parts of this document can be referred to in such arrangements.
NOTE 4 The term “direct unaided visual testing” implies where there is an uninterrupted optical path from
the observer’s eye to the test area and the observer uses no tools or devices (e.g. mirror, endoscope, fibre optic).
NOTE 5 Calculations of strain based on other NDT methods are excluded.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17290:2021(Main)
Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
EN 17290:2021

This document specifies the application of the time-of-flight diffraction (TOFD) technique in testing of metals for quantifying loss of thickness due to erosion and/or corrosion.
This document applies to all types of corrosion or erosion damage, particularly those defined in ISO 16809.
This test applies to unalloyed or low-alloyed steel materials.
It applies to components with a nominal thickness ≥ 6 mm. For smaller thicknesses feasibility tests will be performed to validate the technique.
For other materials, feasibility tests are essential too.
The TOFD technique can be used here as a stand-alone technique or in combination with other non-destructive testing techniques, during manufacturing and for testing in-service, in order to detect material loss caused by erosion and/or corrosion.
This technique is based on analysis of TOFD images established using reflected and/or diffracted ultrasonic signals.
This document does not specify acceptance levels.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13477-2:2021(Main)
Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 2: Verification of operating characteristics
EN 13477-2:2021

This document specifies methods for routine verification of the performance of acoustic emission (AE) equipment comprising one or more sensing channels. It is intended for use by operators of the equipment under laboratory conditions. Verification of the measurement characteristics is advised after purchase of equipment, in order to obtain reference data for later verifications. Verification is also advised after repair, modifications, use under extraordinary conditions, or if one suspects a malfunction. The procedures described in this document do not exclude other qualified methods, e.g. verification in the frequency domain. These procedures apply in general unless the manufacturer specifies alternative equivalent procedures. Safety aspects of equipment for use in potentially explosive zones are not considered in this document.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3452-1:2021(Main)
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2021)
EN ISO 3452-1:2021

This standard defines a method of penetrant testing used to detect discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested. It is mainly applied to metallic materials, but can also be performed on other materials, provided that they are inert to the test media and they are not excessively porous, examples of which are castings, forgings, welds, ceramics, etc.
This standard is not intended to be used for acceptance criteria and gives no information relating to the suitability of individual test systems for specific applications nor requirements for test equipment.
The term 'discontinuity' is used here in the sense that no evaluation concerning acceptability or non-acceptability is included.
Methods for determining and monitoring the essential properties of penetrant testing products to be used are specified in ISO 3452-2 and ISO 3452-3.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3452-2:2021(Main)
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021)
EN ISO 3452-2:2021

This part of ISO 3452 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. It also details on-site control tests and methods.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day