iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 20770-1:2025

(Main)

Drilling and foundation equipment - Safety - Part 1: Common requirements (ISO/DIS 20770-1:2025)

Drilling and foundation equipment - Safety - Part 1: Common requirements (ISO/DIS 20770-1:2025)

See attached draft

Geräte für Bohr- und Gründungsarbeiten - Sicherheit - Teil 1: Gemeinsame Anforderungen (ISO/DIS 20770-1:2025)

Machines de forage et de fondation - Sécurité - Partie 1: Prescriptions commun (ISO/DIS 20770-1:2025)

Oprema za vrtanje in temeljenje - Varnost - 1. del: Splošne zahteve (ISO/DIS 20770-1:2025)

General Information

Status
Not Published
Public Enquiry End Date
29-Apr-2025
ICS
53.100 - Earth-moving machinery
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
I13 - Imaginarni 13
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
20-Feb-2025
Due Date
10-Jul-2025
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
2023/1230 - Regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery and repealing Directive 2006/42/EC of the European Parliament and of the Council and Council Directive 73/361/EEC (Text with EEA relevance)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
prEN ISO 20770-1 - Drilling and foundation equipment - Safety - Part 1: Common requirements (ISO/DIS 20770-1:2025)

Relations

Revises
SIST EN 16228-1:2014+A1:2022 - Drilling and foundation equipment - Safety - Part 1: Common requirements
Effective Date
04-Oct-2023

Buy Standard

prEN ISO 20770-1:2025prEN ISO 20770-1:2025
PreviousNext
Draft
prEN ISO 20770-1:2025
English language
97 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2025
Oprema za vrtanje in temeljenje - Varnost - 1. del: Splošne zahteve (ISO/DIS 20770-
1:2025)
Drilling and foundation equipment - Safety - Part 1: Common requirements (ISO/DIS
20770-1:2025)
Geräte für Bohr- und Gründungsarbeiten - Sicherheit - Teil 1: Gemeinsame
Anforderungen (ISO/DIS 20770-1:2025)
Machines de forage et de fondation - Sécurité - Partie 1: Prescriptions commun (ISO/DIS
20770-1:2025)
Ta slovenski standard je istoveten z: prEN ISO 20770-1
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 20770-1
ISO/TC 195/SC 3
Drilling and foundation
Secretariat: AFNOR
equipment — Safety —
Voting begins on:
Part 1:
2025-02-13
Common requirements
Voting terminates on:
2025-05-08
Machines de forage et de fondation — Sécurité —
Partie 1: Prescriptions commun
ICS: 53.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 20770-1:2025(en)
DRAFT
ISO/DIS 20770-1:2025(en)
International
Standard
ISO/DIS 20770-1
ISO/TC 195/SC 3
Drilling and foundation
Secretariat: AFNOR
equipment — Safety —
Voting begins on:
Part 1:
Common requirements
Voting terminates on:
Machines de forage et de fondation — Sécurité —
Partie 1: Prescriptions commun
ICS: 53.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 20770-1:2025(en)
ii
ISO/DIS 20770-1:2025(en)
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 5
4 Safety requirements and/or protective/risk reduction measures . 7
4.1 General .7
4.2 Requirements for strength and stability .7
4.2.1 Loads .7
4.2.2 Structural calculations .8
4.2.3 Rigid body stability .9
4.2.4 Floating ship, barge or pontoon .17
4.3 Electrotechnical systems .17
4.3.1 General .17
4.3.2 Battery installation .18
4.3.3 Electromagnetic compatibility (EMC) .18
4.4 Hydraulic and pneumatic systems .18
4.4.1 Hydraulic systems .18
4.4.2 Pneumatic systems.19
4.4.3 Hoses, pipes and fittings under pressure .19
4.5 Failure of the power supply .19
4.6 Uncontrolled motion . 20
4.7 Brakes of the carrier machine . 20
4.7.1 Brakes for travelling . 20
4.7.2 Brakes for slewing . 20
4.8 Winches, draw-works and ropes . 20
4.8.1 General . 20
4.8.2 Winches and pulleys.21
4.8.3 Pulley and drum diameters .21
4.8.4 Ropes and rope end terminations . 22
4.8.5 Roller and leaf chains . 22
4.9 Leaders, derricks and feed beams . 22
4.9.1 General . 22
4.9.2 Feed system stroke limiting devices . 23
4.10 Indicating/limiting devices for inclination . 23
4.10.1 Inclination of leader or boom . 23
4.10.2 Inclination of the carrier machine . 23
4.11 Ergonomics . 23
4.11.1 General . 23
4.11.2 Control stations and servicing points . 23
4.12 Access to operating positions, intervention and servicing points . 23
4.13 Platforms on leaders .24
4.13.1 General .24
4.13.2 Working platform for lifting personnel .24
4.13.3 Movable platform . 25
4.14 Operating position(s) . 26
4.14.1 General . 26
4.14.2 Visibility . 28
4.15 Control systems . 29
4.15.1 General . 29
4.15.2 Required performance levels for safety related parts of control systems . 29
4.15.3 Starting . 30
4.15.4 Stopping . . 30
4.16 Control devices .31

iii
ISO/DIS 20770-1:2025(en)
4.16.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16228-6:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
EN 16228-6:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for jetting, grouting and injection equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for jetting, grouting and injection equipment.
Rigs for drilling, vibrating, pile driving, to be used for preparing holes for these applications are covered by EN 16228-2:2014+A1:2021 and/or EN 16228-4:2014+A1:2021.
Jetting, grouting and injection equipment is used in the preparation, transfer and application of grouting materials used for either:
-   the improvement of ground condition; or
-   the filling of voids e.g. around piles or ground anchors.
Jetting, grouting and injection equipment are constituted by all equipment and installations, operated by hand or electrically, pneumatically, mechanically or hydraulically powered, necessary for the following:
-   mixing, storing, measuring and pumping of substances (cement suspension, mortar or chemical liquids/mixtures);
-   jetting, grouting and injection processes (of/into subsoil) with low, medium or high pressure or vacuum systems;
-   deleted text
-   all control systems, electrical or mechanical pressure and flow recorders, for monitoring the grouting;
-   all jetting, grouting and injection accessories, such as: special tools, lances, rods, sockets, packers, retention clamps and swivel hooks.
This document does not apply to machines and equipment for conveying, spraying and placing concrete and mortar (covered by EN 12001).
This document does not deal with jetting, grouting or injection units intended to use products that generate toxic gases.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-7:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
EN 16228-7:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for interchangeable auxiliary equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for interchangeable auxiliary equipment.
This document specifies the specific safety requirements for interchangeable auxiliary equipment to be used in drilling and foundation operations, connected with drilling and foundation equipment, agricultural equipment and/or earth moving machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
Interchangeable auxiliary equipment includes pile installation and extraction equipment, impact hammers, extractors, vibrators, deep vibrators, static pile pushing/pulling devices, rotary percussion hammers, rotary drilling drives, drill mast equipment such as leaders equipped with a drill stem and gears attached to the boom of an excavator and casing oscillators/rotators.
Diaphragm wall cutting tools are dealt with in EN 16228-5:2014+A1:2021.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-2:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-2:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering, "deleted text" when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014+A1:2021.
This document does not repeat the requirements from EN 16228 1:2014+A1:2021, but adds or replaces the requirements for application for mobile drill rigs.
In this document the general term "mobile drill rig" covers several different types of machines for use in:
-   civil engineering;
-   geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting);
-   water well drilling;
-   geothermal installations;
-   landfill drilling;
-   underpinning and tunnelling;
-   for use above ground as well as underground.
Typically, the process of drilling involves the addition of drill rods, tubes, casings or augers etc., normally threaded, as the borehole extends to depth.
NOTE 1   EN 16228-4:2014+A1:2021 covers machines with a rotary torque greater than 35 kNm.
NOTE 2   The term "drill rigs" includes rigs with a separate power pack supplied by the rig manufacturer.
The following machines are excluded from the scope of this document:
-   tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to prEN 16191;
-   raise boring machines;
-   drill rigs used in oil and gas industry;
-   specialized mining machinery and equipment for opencast mining (e.g. rock drill rigs, blast hole drills) (under the scope of CEN/TC 196);
-   all underground mining machinery and equipment for the extraction of solid mineral substances (e. g. rock drill rigs, raise boring machines, shaft boring machines, mining auger boring machines, jumbos) as well as machinery and equipment for underground mine development (under the scope of CEN/TC 196);
-   core drilling machines on stand covered by EN 12348;
-   hand-held machines (in particular machines covered by ISO 11148-5).
This document is not applicable to mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering manufactured before the date of its publication.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-5:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
EN 16228-5:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for diaphragm walling equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for diaphragm walling equipment.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-1:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 16228-1:2014+A1:2021

This European Standard specifies the common safety requirements for drilling and foundation equipment.
Part 1 of this European Standard deals with the significant hazards common to drilling and foundation equipment (see Annex A), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping).
NOTE 1   The requirements specified in this part of the standard are common to two or more families of drilling and foundation equipment.
This document gives safety requirements for all types of drilling and foundation equipment and is intended to be used in conjunction with one of parts 2 to 7. These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of drilling and foundation equipment in question.
For multipurpose machinery, the parts of the standard that cover the specific functions and applications are used, e.g. a drilling machine also used as a piling machine will use the relevant requirements of EN 16228-1, EN 16228-2, and EN 16228-4.
The following machines are excluded from the scope of this standard:
-   tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to EN 16191;
-   raise boring machines;
-   drill rigs used in oil and gas industry;
-   specialized mining machinery and equipment for opencast mining (e.g. rock drill rigs, blast hole drills) (under the scope of CEN/TC 196);
-   all underground mining machinery and equipment for the extraction of solid mineral substances (e.g. rock drill rigs, raise boring machines, shaft boring machines, mining auger boring machines, jumbos) as well as machinery and equipment for underground mine development (under the scope of CEN/TC 196);
-   core drilling machines on stand (covered by EN 12348);
-   hand-held machines (in particular machines covered by ISO 11148-5).
NOTE 2   Specific requirements for offshore applications are not covered by this European Standard.
Where a drilling or foundation equipment of fixed configuration that is not intended to be separated is assembled using a carrier based on earth-moving equipment, agricultural equipment, or a crane, then the completed assembly is !covered by this" standard.
Drilling and foundation equipment within the scope of EN 16228 parts 1 to 6 may include interchangeable auxiliary equipment within the scope of EN 16228-7, either as an integral part of its construction or as interchangeably fitted equipment.
!If drilling and foundation equipment is intended to be used in a potentially explosive atmosphere, or in case of lightning risk, additional requirements will need to be met which are not covered by this document.
This document is not applicable to drilling and foundation equipment manufactured before the date of its publication."

  • Standard
    176 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-4:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 4: Foundation equipment
EN 16228-4:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for foundation equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021 but adds or replaces the requirements for application for foundation equipment.
In this document the general term "foundation equipment" covers several different types of machines used for installation and/or extracting by drilling (machines with a rotary torque greater than 35 kNm), driving, vibrating, pushing, pulling or a combination of techniques, or any other way, of:
-   longitudinal foundation elements;
-   soil improvement by vibrating and soil mixing techniques;
-   vertical drainage.
NOTE   Some foundation equipment may have an additional rotary head with a torque less than 35 kNm for pre-drilling applications; this equipment is covered by this standard.
Machines with one or more of the following characteristics are not covered by this standard, but are covered by EN 16228-2:
-   machines that have a main rotary head torque of less than 35 kNm;
-   machines that have multi-directional drilling capability;
-   machines for which adding and removing rods or digging and drilling tools etc. is usually required during the installation/extraction process.
Typically the process of foundation techniques involves the installation of longitudinal elements such as concrete piles, steel beams, tubes and sheet piles, injection elements as tubes and hoses and casings for cast in situ.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-3:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
EN 16228-3:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for horizontal directional drills.
A machine is considered a horizontal directional drill if it is designed to drill in a shallow arc for the installation of pipes, conduits, and cables and typically has a drill string entry angle of less than 45° relative to the operating surface of the earth.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-7:2014/kprA1:2021(Amendment)
Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
EN 16228-7:2014/FprA1

This European Standard, together with part 1, deals with all significant hazards for interchangeable auxiliary equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014.
This document does not repeat the requirements from EN 16228 1, but adds or replaces the requirements for application for interchangeable auxiliary equipment.
This document specifies the specific safety requirements for interchangeable auxiliary equipment to be used in drilling and foundation operations, connected with drilling and foundation equipment, agricultural equipment and/or earth moving machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
Interchangeable auxiliary equipment includes pile installation and extraction equipment, impact hammers, extractors, vibrators, deep vibrators, static pile pushing/pulling devices, rotary percussion hammers, rotary drilling drives, drill mast equipment such as leaders equipped with a drill stem and gears attached to the boom of an excavator and casing oscillators/rotators.
Diaphragm wall cutting tools are dealt with in EN 16228 5.

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 20770-4:2025(Main)
Drilling and foundation equipment - Safety - Part 4: Diaphragm walling equipment (ISO/DIS 20770-4:2025)
prEN ISO 20770-4

See attached draft

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-1:2014/kprA1:2021(Amendment)
Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 16228-1:2014/FprA1

This European Standard specifies the common safety requirements for drilling and foundation equipment.
Part 1 of this European Standard deals with the significant hazards common to drilling and foundation equipment (see Annex A), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping).
NOTE 1   The requirements specified in this part of the standard are common to two or more families of drilling and foundation equipment.
This document gives safety requirements for all types of drilling and foundation equipment and is intended to be used in conjunction with one of parts 2 to 7. These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of drilling and foundation equipment in question.
For multipurpose machinery, the parts of the standard that cover the specific functions and applications are used, e.g. a drilling machine also used as a piling machine will use the relevant requirements of EN 16228 parts 1, 2, and 4.
The following machines are excluded from the scope of this standard:
-   tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to prEN 16191;
-   raise boring machines;
-   drill rigs used in oil and gas industry.
NOTE 2   Specific requirements for offshore applications are not covered by this European Standard.
Where a drilling or foundation equipment of fixed configuration that is not intended to be separated is assembled using a carrier based on earth-moving equipment, agricultural equipment, or a crane, then the completed assembly will conform to the requirements specified in this drilling and foundation equipment standard.
Drilling and foundation equipment within the scope of EN 16228 parts 1 to 6 may include interchangeable auxiliary equipment within the scope of EN 16228 part 7, either as an integral part of its construction or as interchangeably fitted equipment.
If drilling and foundation equipment is intended to be used in a potentially explosive atmosphere, additional requirements will need to be met which are not covered by this standard.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day