SIST EN 62453-302:2018
(Main)Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 (IEC 62453-302:2016)
Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 (IEC 62453-302:2016)
Communication Profile Family 2 (commonly known as CIP™2) defines communication profiles based on IEC 61158-2 Type 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2, and IEC 62026-3. The basic profiles CP 2/1 (ControlNet™3), CP 2/2 (EtherNet/IP™4), and CP 2/3 (DeviceNet™2) are defined in IEC 61784-1 and IEC 61784-2. An additional communication profile (CompoNet™2), also based on CIP™, is defined in [15].
This part of IEC 62453 provides information for integrating the CIP™ technology into the FDT interface specification (IEC 62453-2).
This part of IEC 62453 specifies communication and other services.
This specification neither contains the FDT specification nor modifies it.
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 302: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784 (IEC 62453-302:2016)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 302: Intégration des profils de communication - CPF 2 de l'IEC 61784 (IEC 62453-302:2016)
L'IEC 62453-302:2016 fournit des informations sur l'intégration de la technologie CIP dans la spécification des interfaces des outils des dispositifs de terrain (FDT) (IEC 62453-2). Elle spécifie les services de communication et autres services. Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Les principales modifications sont apportées afin de fournir une prise en charge améliorée de l'Ethernet IP (voir Articles 9, 10 et 12), des indications de mise en oeuvre supplémentaires (voir Annexe A) et venir à l'appui de l'introduction de la technologie conformément à l'IEC TR 62453-42.
Cette publication doit être lue conjointement avec la IEC 62453-2:2009.
Specifikacija vmesnika orodja procesne naprave - 302. del: Integracija komunikacijskih profilov - IEC 61784 CPF 2 (IEC 62453-302:2016)
Družina komunikacijskega profila 2 (znana kot CIP™2) določa komunikacijske profile, ki temeljijo na standardih IEC 61158-2, tip 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2 in IEC 62026-3. Osnovni profili CP 2/1 (ControlNet™3), CP 2/2 (EtherNet/IP™4) in CP 2/3 (DeviceNet™2) so določeni v standardih IEC 61784-1 in IEC 61784-2. Dodatni komunikacijski profil (CompoNet™2), ki tudi temelji na CIP™, je določen v [15].
Ta del standarda IEC 62453 podaja informacije za integracijo tehnologije CIP™ v specifikacijo vmesnika orodja procesne naprave (FTD) (IEC 62453-2).
Ta del standarda IEC 62453 določa komunikacijske in druge storitve.
Ta specifikacija niti ne vsebuje specifikacije orodja procesne naprave niti je ne spreminja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62453-302:2018
01-februar-2018
1DGRPHãþD
SIST EN 62453-302:2010
Specifikacija vmesnika orodja procesne naprave - 302. del: Integracija
komunikacijskih profilov - IEC 61784 CPF 2 (IEC 62453-302:2016)
Field device tool (FDT) interface specification - Part 302: Communication profile
integration - IEC 61784 CPF 2 (IEC 62453-302:2016)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 302: Integration von
Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784 (IEC
62453-302:2016)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 302:
Intégration des profils de communication - CPF 2 de l'IEC 61784 (IEC 62453-302:2016)
Ta slovenski standard je istoveten z: EN 62453-302:2017
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62453-302:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62453-302:2018
---------------------- Page: 2 ----------------------
SIST EN 62453-302:2018
EUROPEAN STANDARD EN 62453-302
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2017
ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-302:2009
English Version
Field device tool (FDT) interface specification - Part 302:
Communication profile integration - IEC 61784 CPF 2
(IEC 62453-302:2016)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 302: Intégration des profils de 302: Integration von Kommunikationsprofilen -
communication - CPF 2 de l'IEC 61784 Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784
(IEC 62453-302:2016) (IEC 62453-302:2016)
This European Standard was approved by CENELEC on 2016-07-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62453-302:2017 E
---------------------- Page: 3 ----------------------
SIST EN 62453-302:2018
EN 62453-302:2017 (E)
European foreword
The text of document 65E/336/CDV, future edition 1 of IEC 62453-302:2016, prepared by SC 65E
"Devices and integration in enterprise systems", of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62453-302:2017.
The following dates are fixed:
• latest date by which this document has (dop) 2018-06-08
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-12-08
standards conflicting with this
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62453-302:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61131-3:2013 NOTE Harmonized as EN 61131-3:2013
IEC 62453-1:2009 NOTE Harmonized as EN 62453-1:2009
IEC/TR 62453-41:2009 NOTE Harmonized as CLC/TR 62453-41:2009
IEC/TR 62453-502:2009 NOTE Harmonized as CLC/TR 62453-502:2009
2
---------------------- Page: 4 --
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.