SIST EN 62453-302:2010
(Main)Field device tool interface specification -- Part 302: Communication profile integration - IEC 61784 CPF 2
Field device tool interface specification -- Part 302: Communication profile integration - IEC 61784 CPF 2
Communication Profile Family 2 (commonly known as CIP™1) defines communication profiles based on IEC 61158-2 Type 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2, and IEC 62026-3. The basic profiles CP 2/1 (ControlNet™2), CP 2/2 (EtherNet/IP™3), and CP 2/3 (DeviceNet™1) are defined in IEC 61784-1 and IEC 61784-2. An additional communication profile (CompoNet™1), also based on CIP™, is defined in [14]. This part of IEC 62453 provides information for integrating the CIP™ technology into the FDT interface specification (IEC 62453-2). This part of IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it.
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 302: Integration von Kommunikationsprofilen - IEC 61784 Kommunikationsprofilfamilie (CPF) 2
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 302: Intégration des profils de communication - CEI 61784 CPF 2
La CEI 62453-302:2009 fournit des informations sur l'intégration de la technologie CIP dans la spécification des interfaces des outils des dispositifs de terrain (FDT) (CEI 62453 2). Elle spécifie la communication et d'autres services. La présente partie, conjointement aux autres parties de la première édition de la série CEI 62453, annule et remplace la CEI/PAS 62453-1, la CEI/PAS 62453-2, la CEI/PAS 62453-3, la CEI/PAS 62453-4 et la CEI/PAS 62453-5 publiées en 2006, et constitue une révision technique. La présente version bilingue (2013-07) correspond à la version anglaise monolingue publiée en 2009-06.
Cette publication doit être lue conjointement avec la CEI 62453-2:2009.
Specifikacija vmesnika orodja procesne naprave - 302. del: Integracija komunikacijskih profilov - IEC 61784 CPF 2 (IEC 62453-302:2009)
Družina komunikacijskih profilov 2 (splošno znana kot CIP™1) opredeljuje komunikacijske profile, osnovane na IEC 61158-2, tipu 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2 in IEC 62026-3. Osnovni profili CP 2/1 (ControlNet™2), CP 2/2 (EtherNet/IP™3) in CP 2/3 (DeviceNet™1) so določeni v IEC 61784-1 in IEC 61784-2. Dodatni komunikacijski profil (CompoNet™1), prav tako osnovan na CIP™, je določen v [14]. Ta del IEC 62453 podaja informacije za integriranje CIP™ tehnologije v specifikacijo vmesnika orodja procesne naprave (IEC 62453-2). Ta del IEC 62453 opredeljuje komunikacijo in druge storitve. Ta specifikacija ne vsebuje specifikacije orodja procesne naprave niti je ne spreminja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62453-302:2010
01-januar-2010
Specifikacija vmesnika orodja procesne naprave - 302. del: Integracija
komunikacijskih profilov - IEC 61784 CPF 2 (IEC 62453-302:2009)
Field device tool interface specification -- Part 302: Communication profile integration -
IEC 61784 CPF 2
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 302: Integration von
Kommunikationsprofilen - IEC 61784 Kommunikationsprofilfamilie (CPF) 2
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 302:
Intégration des profils de communication - CEI 61784 CPF 2
Ta slovenski standard je istoveten z: EN 62453-302:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62453-302:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62453-302:2010
---------------------- Page: 2 ----------------------
SIST EN 62453-302:2010
EUROPEAN STANDARD
EN 62453-302
NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.05; 35.110
English version
Field device tool (FDT) interface specification -
Part 302: Communication profile integration -
IEC 61784 CPF 2
(IEC 62453-302:2009)
Spécification des interfaces des outils Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 302: Intégration des profils Teil 302: Integration von
de communication - Kommunikationsprofilen -
CEI 61784 CPF 2 Kommunikationsprofilfamilie (CPF) 2
(CEI 62453-302:2009) nach IEC 61784
(IEC 62453-302:2009)
This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62453-302:2009 E
---------------------- Page: 3 ----------------------
SIST EN 62453-302:2010
EN 62453-302:2009 - 2 -
Foreword
The text of document 65E/126/FDIS, future edition 1 of IEC 62453-302, prepared by SC 65E, Devices and
integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-302 on
2009-08-01.
Each part of the EN 62453-3xy series is intended to be read in conjunction with EN 62453-2.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62453-302:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[2] IEC 61131-3 NOTE Harmonized as EN 61131-3:2003 (not modified).
[4] IEC/TR 62453-41 NOTE Harmonized as CLC/TR 62453-41:2009 (not modified).
[5] IEC/TR 62453-502 NOTE Harmonized as CLC/TR 62453-502:2009 (not modified).
__________
---------------------- Page: 4 ----------------------
SIST EN 62453-302:2010
- 3 - EN 62453-302:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61158-2 – Industrial communication networks - EN 61158-2 2008
Fieldbus specifications -
Part 2: Physical layer specification and service
definition
1) 2)
IEC 61158-3-2 – Industrial communication networks - EN 61158-3-2 2008
Fieldbus specifications - Part 3-2: Data-link
layer service definition -
Type 2 elements
1) 2)
IEC 61158-4-2 – Industrial communication networks - EN 61158-4-2 2008
Fieldbus specifications -
Part 4-2: Data-link layer protocol specification -
Type 2 elements
IEC 61158-5-2 2007 Industrial communication networks - EN 61158-5-2 2008
Fieldbus specifications -
Part 5-2: Application layer service definition -
Type 2 elements
IEC 61158-6-2 2007 Industrial communication networks - EN 61158-6-2 2008
Fieldbus specifications -
Part 6-2: Application layer protocol
specification - Type 2 elements
1) 2)
IEC 61784-1 – Industrial communication networks - Profiles - EN 61784-1 2008
Part 1: Fieldbus profiles
1) 2)
IEC 61784-2 – Industrial communication networks - Profiles - EN 61784-2 2008
Part 2: Additional fieldbus profiles for real-time
networks based on ISO/IEC 8802-3
IEC 61784-3-2 2007 Industrial communication networks - Profiles - EN 61784-3-2 2008
Part 3-2: Functional safety fieldbuses -
Additional specifications for CPF 2
1) 2)
IEC 62026-3 – Low-voltage switchgear and controlgear - EN 62026-3 2009
Controller-device interfaces (CDIs) -
Part 3: DeviceNet
IEC 62453-1 2009 Field device tool (FDT) interface specification - EN 62453-1 2009
Part 1: Overview and guidance
IEC 62453-2 2009 Field device tool (FDT) interface specification - EN 62453-2 2009
Part 2: Concepts and detailed description
ISO/IEC 19501 2005 Information technology - – –
Open Distributed Processing -
Unified Modeling Language (UML)
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 5 ----------------------
SIST EN 62453-302:2010
EN 62453-302:2009 - 4 -
Publication Year Title EN/HD Year
ISO 15745-2 2003 Industrial automation systems and integration - – –
Open systems application integration
framework -
Part 2: Reference description for
ISO 11898-based control systems
ISO 15745-3 2003 Industrial automation systems and integration - – –
Open systems application integration
framework -
Part 3: Reference description for
IEC 61158-based control systems
---------------------- Page: 6 ----------------------
SIST EN 62453-302:2010
IEC 62453-302
®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
Field device tool (FDT) interface specification –
Part 302: Communication profile integration – IEC 61784 CPF 2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
V
ICS 25.040.40; 35.100.05; 35.110 ISBN 2-8318-1050-0
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN 62453-302:2010
– 2 – 62453-302 © IEC:2009(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Terms, definitions, symbols, abbreviated terms and conventions .8
3.1 Terms and definitions .8
3.2 Symbols and abbreviated terms.8
3.3 Conventions .8
3.3.1 Data type names and references to data types .8
3.3.2 Vocabulary for requirements.9
4 Bus category .9
5 Access to instance and device data.9
6 Protocol specific behavior.9
7 Protocol specific usage of general data types .9
8 Protocol specific common data types.10
9 Network management data types.14
9.1 General .14
9.2 Node address.14
9.3 Scanner/master – Bus parameter set (CIP) .14
10 Communication data types .22
11 Channel parameter data types.24
12 Device identification .26
12.1 Device type identification data types .26
12.2 Topology scan data types.27
12.3 Scan identification data types.27
12.4 Device type identification data types .28
Annex A (informative) Implementation hints .30
Bibliography.32
Figure 1 – Part 302 of the IEC 62453 series .6
Figure A.1 – Examples of DTM naming for CompoNet.31
9
Table 1 – Protocol identifiers .
Table 2 – Protocol specific usage of general data types.10
Table 3 – Simple protocol specific common data types .10
Table 4 – Structured protocol specific common data types.12
Table 5 – Simple fieldbus configuration data types .14
Table 6 – Structured fieldbus configuration data types .16
Table 7 – Simple communication data types .22
Table 8 – Structured communication data types.23
Table 9 – Simple channel parameter data types.25
Table 10 – Structured channel parameter data types .25
Table 11 – Identification data types with protocol specific mapping.27
---------------------- Page: 8 ----------------------
SIST EN 62453-302:2010
62453-302 © IEC:2009(E) – 3 –
Table 12 – Simple identification data types with protocol independent semantics.27
Table 13 – Structured identification data types with protocol independent semantics .27
Table 14 – Simple scan identification data types.28
Table 15 – Structured scan identification data types .28
Table 16 – Structured device type identification data types .29
Table A.1 – CompoNet relationship between Device Category, Node Address, MAC ID .30
---------------------- Page: 9 ----------------------
SIST EN 62453-302:2010
– 4 – 62453-302 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –
Part 302: Communication profile integration –
IEC 61784 CPF 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62453-302 has been prepared by subcommittee 65E: Devices and
integration in enterprise systems, of IEC technical committee 65: Industrial-process
measurement, control and automation.
This part, in conjunction with the other parts of the first edition of the IEC 62453 series
cancels and replaces IEC/PAS 62453-1, IEC/PAS 62453-2, IEC/PAS 62453-3, IEC/PAS
62453-4 and IEC/PAS 62453-5 published in 2006, and constitutes a technical revision.
Each part of the IEC 62453-3xy series is intended to be read in conjunction with IEC 62453-2.
---------------------- Page: 10 ----------------------
SIST EN 62453-302:2010
62453-302 © IEC:2009(E) – 5 –
The text of this standard is based on the following documents:
FDIS Report on voting
65E/126/FDIS 65E/139/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 62453 series, under the general title Field Device Tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
---------------------- Page: 11 ----------------------
SIST EN 62453-302:2010
– 6 – 62453-302 © IEC:2009(E)
INTRODUCTION
This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool)
components for function control and data access within a client/server architecture. The
specification is a result of an analysis and design process to develop standard interfaces to
facilitate the development of servers and clients by multiple vendors that need to interoperate
seamlessly.
With the integration of fieldbusses into control systems, there are a few other tasks which
need to be performed. In addition to fieldbus- and device-specific tools, there is a need to
integrate these tools into higher-level system-wide planning- or engineering tools. In
particular, for use in extensive and heterogeneous control systems, typically in the area of the
process industry, the unambiguous definition of engineering interfaces that are easy to use for
all those involved is of great importance.
A device-specific software component, called DTM (Device Type Manager), is supplied by the
field device manufacturer with its device. The DTM is integrated into engineering tools via the
FDT interfaces defined in this specification. The approach to integration is in general open for
all kinds of fieldbusses and thus meets the requirements for integrating different kinds of
devices into heterogeneous control systems.
Figure 1 shows how IEC 62453-302 is aligned in the structure of the IEC 62453 series.
Part 302 Communication
Profile
Integration –
IEC 61784 CPF 2
IEC 1125/09
Figure 1 – Part 302 of the IEC 62453 series
---------------------- Page: 12 ----------------------
SIST EN 62453-302:2010
62453-302 © IEC:2009(E) – 7 –
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –
Part 302: Communication profile integration –
IEC 61784 CPF 2
1 Scope
1
Communication Profile Family 2 (commonly known as CIP™ ) defines communication profiles
based on IEC 61158-2 Type 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2,
2
IEC 61158-6-2, and IEC 62026-3. The basic profiles CP 2/1 (ControlNet™ ), CP 2/2
1
3
(EtherNet/IP™ ), and CP 2/3 (DeviceNet™ ) are defined in IEC 61784-1 and IEC 61784-2. An
1
additional communication profile (CompoNet™ ), also based on CIP™, is defined in [14].
This part of IEC 62453 provides information for integrating the CIP™ technology into the FDT
interface specification (IEC 62453-2).
This part of IEC 62453 specifies communication and other services.
This specification neither contains the FDT specification nor modifies it.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 61158-2, Industrial communication networks – Fieldbus specifications – Part 2: Physical
layer specification and service definition
IEC 61158-3-2, Industrial communication networks – Fieldbus specifications – Part 3-2: Data-
link layer service definition – Type 2 elements
IEC 61158-4-2, Industrial communication networks – Fieldbus specifications – Part 4-2: Data-
link layer protocol specification – Type 2 elements
IEC 61158-5-2:2007, Industrial communication networks – Fieldbus specifications – Part 5-2:
Application layer service definition – Type 2 elements
———————
1
CIP™ (Common Industrial Protocol), DeviceNet™ and CompoNet™ are trade names of Open DeviceNet Vendor
Association, Inc (ODVA). This information is given for the convenience of users of this document and does not
constitute an endorsement by IEC of the trade name holder or any of its products. Compliance to this standard
does not require use of the trade names CIP™, DeviceNet™ or CompoNet™. Use of the trade names CIP™,
DeviceNet™ or CompoNet™ requires permission of Open DeviceNet Vendor Association,Inc.
2
ControlNet™ is a trade name of ControlNet International, Ltd. This information is given for the convenience of
users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its
products. Compliance to this profile does not require use of the trade name ControlNet™. Use of the trade
name ControlNet™ requires permission of ControlNet International, Ltd.
3
EtherNet/IP™ is a trade name of ControlNet International, Ltd. and Open DeviceNet Vendor Association, Inc.
This information is given for the convenience of users of this document and does not constitute an endorsement
by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the
trade name EtherNet/IP™. Use of the trade name EtherNet/IP™ requires permission of either ControlNet
International, Ltd. or Open DeviceNet Vendor Association, Inc.
---------------------- Page: 13 ----------------------
SIST EN 62453-302:2010
– 8 – 62453-302 © IEC:2009(E)
IEC 61158-6-2:2007, Industrial communication networks – Fieldbus specifications – Part 6-2:
Application layer protocol specification – Type 2 elements
IEC 61784-1, Industrial communication networks – Profiles – Part 1: Fieldbus profiles
IEC 61784-2, Industrial communication networks – Profiles – Part 2: Additional fieldbus
profiles for real-time networks based on ISO/IEC 8802-3
IEC 61784-3-2:2007, Industrial communication networks – Profiles – Part 3-2: Functional
safety fieldbuses – Additional specifications for CPF 2
IEC 62026-3, Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) –
Part 3: DeviceNet
IEC 62453-1:2009, Field Device Tool (FDT) interface specification – Part 1: Overview and
guidance
IEC 62453-2:2009, Field Device Tool (FDT) interface specification – Part 2: Concepts and
detailed description
ISO/IEC 19501:2005, Information technology – Open Distributed Processing – Unified
Modeling Language (UML) Version 1.4.2
ISO 15745-2:2003, Industrial automation systems and integration – Open systems application
integration framework – Part 2: Reference description for ISO 11898-based control systems
ISO 15745-3:2003, Industrial automation systems and integration – Open systems application
integration framework – Part 3: Reference description for IEC 61158-based control systems
3 Terms, definitions, symbols, abbreviated terms and conventions
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62453-1 and
IEC 62453-2 apply.
3.2 Symbols and abbreviated terms
For the purposes of this document, the symbols and abbreviations given in IEC 62453-1,
IEC 62453-2 and the following apply.
CIP™ Common Industrial Protocol
CP Communication Profile [IEC 61784-1]
CPF Communication Profile Family [IEC 61784-1]
EDS Electronic Data Sheet [ISO 15745]
UML Unified Modelling Language [ISO/IEC 19501]
3.3 Conventions
3.3.1 Data type names and references to data types
The conventions for naming and referencing of data types are explained in IEC 62453-2
Clause A.1
---------------------- Page: 14 ----------------------
SIST EN 62453-302:2010
62453-302 © IEC:2009(E) – 9 –
3.3.2 Vocabulary for requirements
The following expressions are used when specifying requirements.
Usage of “shall” or “mandatory” No exceptions allowed.
Usage of “should” or “recommended” Strong recommendation. It may make sense in
special exceptional cases to differ from the
described behavior.
Usage of “can’ or “optional’ Function or behavior may be provided,
depending on defined conditions.
4 Bus category
IEC 61784 CPF 2 protocol is identified in the protocolId element of the structured data type
'fdt:BusCategory' by the following unique identifiers, as specified in Table 1.
Table 1 – Protocol identifiers
Identifier value ProtocolId name Description
19B91472-EDB9-4e8c-BB61-516EEC79C1C0 ‘CIP DeviceNet’ Support for CP 2/3 (DeviceNet)
6CD80F51-019D-4e60-AEAC-B10144943B4B ‘CIP EthernetIP’ Support for CP 2/2 (EtherNet/IP)
C290CE23-62EA-478c-97F2-97EFEC602E05 ‘CIP ControlNet’ Support for CP 2/1 (ControlNet)
089BB2BC-B75A-11DB-8314-0800200C9A66 ‘CIP CompoNet’ Support for CompoNet
5 Access to instance and device data
The services InstanceDataInformation and DeviceDataInformation shall provide access at
least to all parameters defined in the Params section of the EDS.
6 Protocol specific behavior
IEC 61784 CPF 2 protocol has specific requirements related to configuration of fieldbus
masters.
It is very important to keep both data provider and consumer synchronized. Therefore data
provider shall be informed if the provided data has been modified. For instance, in case the
provided data is modified by the scanner/master DTM, then the slave/adapter DTM shall be
provided with the new data set.
NOTE For a description of data exchange between DTMs, see 6.3 of IEC 62453-2 (Configuration of fieldbus
master or communication scheduler).
7 Protocol specific usage of general data types
Table 2 shows how general data types, defined in IEC 62453-2 within the namespace ‘fdt’, are
used with IEC 61784 CPF 2 devices.
According to IEC 62453-2, at least one set of semantic information (one per supported
fieldbus protocol) shall be provided for each accessible data object, using the
‘SemanticInformation’ general data type. The corresponding data type ‘applicationDomain’
shall have the value “FDT_CIP” and the data type ‘semanticId’ shall have an appropriate
value, as specified in Table 2).
---------------------- Page: 15 ----------------------
SIST EN 62453-302:2010
– 10 – 62453-302 © IEC:2009(E)
Table 2 – Protocol specific usage of general data types
Data type Description for use
fdt:address The “address” data type is not mandatory for the exposed parameters in
the DTMs. But if the address will be used, the string shall be
constructed according to the rules of the semanticId. That means the
data type “semanticId” is always the same as the data type “address”
fdt:protocolId See Clause 4.
fdt:deviceTypeId As defined in Identity object (see 6.2.1.2.2 of IEC 61158-5-2)
fdt:deviceTypeInformation A CIP DTM shall provide the path to the device specific EDS file with
this data type. For DTM certification, the path to the certified EDS file
shall be provided here.
NOTE The EDS information is accessible via
• IDtmParameter::GetParameters()
• IDtmInformation::GetInformation()
fdt:deviceTypeInformationPath Path to the EDS file which is also provided via the attribute
‘deviceTypeInformation’
The attribute contains full path to the EDS file including the file name in
URL notation.
For CIP devices, it is mandatory to provide information for this data
type.
This attribute is specific to FDT 1.2.1(see IEC 62453-2 and [8]),
therefore it shall not be provide
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.