iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 10277-3:2000

(Main)

Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels

Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels

1.1 This part of EN 10277 applies to bright steel bars in the drawn, turned or ground condition, in straight lengths of free-cutting steels. 1.2 This EN 10277-3 is complemented by EN 10277-1.

Blankstahlerzeugnisse - Technische Lieferbedingungen - Teil 3: Automatenstähle

1.1. Dieser Teil von EN 10277 gilt für blanke, gerade Stäbe aus Automatenstählen im gezogenen, geschälten oder geschliffenen Zustand. 1.2 Diese EN 10277-3 wird vervollständigt durch EN 10277-1.

Produits en acier transformés a froid - Conditions techniques de livraison - Partie 3: Aciers de décolletage

1.1 La présente partie de l'EN 10277 spécifie les conditions techniques de livraison des barres d'acier transformé a froid a l'état étiré, écrouté galeté ou rectifié, droite en acier de décolletage. 1.2 L'EN 10277-1 complete l'EN 10277-3.

Svetli jekleni izdelki - Tehnični dobavni pogoji - 3. del: Avtomatna jekla

General Information

Status
Withdrawn
Publication Date
31-Oct-2000
Withdrawal Date
03-Apr-2008
ICS
77.140.01 - Iron and steel products in general
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
18-Mar-2008
Due Date
10-Apr-2008
Completion Date
04-Apr-2008
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 10277-3:1999 - Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels

Relations

Replaced By
SIST EN 10277-3:2008 - Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels
Effective Date
01-May-2008

Buy Standard

EN 10277-3:2000EN 10277-3:2000
PreviousNext
Standard
EN 10277-3:2000
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Blankstahlerzeugnisse - Technische Lieferbedingungen - Teil 3: AutomatenstähleProduits en acier transformés a froid - Conditions techniques de livraison - Partie 3: Aciers de décolletageBright steel products - Technical delivery conditions - Part 3: Free-cutting steels77.140.01Železni in jekleni izdelki n
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TP CEN/TR 10261:2023(Main)
Iron and steel - European standards for the determination of chemical composition
CEN/TR 10261:2023

This document lists, under Clause 4, the European Standards which are currently available for the determination of the chemical composition of steels and cast irons.
In Clause 5, this document provides details on the range of application and gives the principle of the method described in each standard.
Items which are under preparation as European Standards or as CEN Technical Reports by ECISS/TC 102 are available on the webpage of CEN, through the  following link: https://standards.cen.eu/dyn/www/f?p=204:22:0::::FSP_ORG_ID:733643&cs=123E58BF77E3DE921F548B80C5FF2E5D4.
Annex A gives a list of other European Standards and CEN Technical Reports applicable for the determination of the chemical composition of steels and cast irons.
Annex B gives a list of withdrawn Euronorms, together with the corresponding replacement European Standards, if any.
Annex C shows graphical representations of the content ranges of the methods listed in this document. Figure C.1 gives the content ranges of the referee methods, Figure C.2 gives the content ranges of the routine methods and Figure C.3 represents the fields of application of all the methods described.
Annex D provides a trilingual key of the abbreviations used in the Figures given in Annex C.
NOTE   Three methods applicable for the analysis of some ferro-alloys are listed in Annex A.

  • Technical report
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 10317:2020(Main)
European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
CEN/TR 10317:2020

This document describes the classification, method of sample preparation, certification main rules and certificate content of the EURONORM-CRMs.
It also details the sample presentation of the various producers' organizations and the distributing sources.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10164:2018(Main)
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN 10164:2018

This European Standard specifies through thickness properties and associated test methods for flat products and sections of steel.
This document may be applied as a supplement to all product standards for flat products and sections of fully killed steels, except stainless steels. It covers products having a thickness between 15 mm and 400 mm inclusive of steels with a specified minimum upper yield strength ReH or proof strength Rp0,2 ≤ 960 MPa ) for which improved through thickness properties are required.
The application of this document to other steel types shall be the subject of agreement at the time of the order.
The application of this document to products with thickness between 10 mm ≤ t <15 mm shall be the subject of agreement at the time of the order. See option 1.
The application of this document to products with thickness t > 400 mm shall be the subject of agreement at the time of the order. See option 3.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10277:2018(Main)
Bright steel products - Technical delivery conditions
EN 10277:2018

This European Standard specifies the technical delivery requirements for bright steel bars in the drawn or peeled/turned condition and they are intended for mechanical purposes, for example for machine parts. The bright bars are subdivided into the following steel types:
a)   non-alloy general engineering steels;
b)   non-alloy free-cutting steels;
c)   non-alloy and alloy case-hardening steels;
d)   non-alloy and alloy steels for quenching and tempering.
Bright steel products of stainless steels are to be found in EN 10088-3.
In addition to this standard, the general technical delivery requirements of EN 10021 are applicable.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 377:2017(Main)
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 377:2017

This document specifies requirements for the identification, location and preparation of samples and test
pieces intended for mechanical tests on steel sections, bars, rod, flat products and tubular products as
defined in ISO 6929. If agreed in the order, this document can also apply to other metallic products. These
samples and test pieces are for use in tests that are carried out in conformity with the methods specified
in the product or material standard or, in the absence of this, in the standard for the test method.
Where the requirements of the order or product standard differ from those given in this document,
then the requirements of the order or product standard apply.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10079:2007(Main)
Definition of steel products
EN 10079:2007

This European Standard defines terms for steel products according to:
a) shape and dimensions; and
b) appearance and surface condition.
NOTE 1   Although the products are generally defined independently of their end uses or manufacturing processes, it has sometimes been necessary to make reference to these criteria.
NOTE 2   All dimensions given in this European Standard are nominal.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10021:2007(Main)
General technical delivery conditions for steel products
EN 10021:2006

This European Standard specifies the general technical delivery conditions for all steel products covered by
EN 10079 with the exception of steel castings and powder metallurgical products.
Where the delivery requirements agreed for the order or specified in the appropriate product standard differ from the general technical delivery conditions defined in this European Standard, then the requirements agreed for the order or specified in the appropriate product standard apply.
NOTE   Inspection documents are covered by EN 10168 and EN 10204.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10204:2004(Main)
Metallic products - Types of inspection documents
EN 10204:2004

1.1   This European Standard specifies the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of all metallic products e.g. plates, sheets, bars, forgings, castings, whatever their method of production.
1.2   This standard may also apply to non-metallic products.
1.3   This standard is used in conjunction with the product specifications which specify the technical delivery conditions of the products.
NOTE 1   The list of information that may be included in the inspection documents can be found in appropriate documents, e.g. prEN 10168 for steel.
NOTE 2   Annex A gives a summary of the different inspection documents.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10168:2004(Main)
Steel products - Inspection documents - List of information and description
EN 10168:2004

This European Standard lists the information that may be communicated and includes a brief description in the inspection documents of iron and steel products as described in EN 10021 and EN 10204. By laying down standardized designations and definitions for information likely to appear in inspection documents and by introducing code numbers for each of the designated sections, this European Standard intends to contribute to the elimination of communication difficulties in European trade.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10278:2000(Main)
Dimensions and tolerances of bright steel products
EN 10278:1999

This European Standard applies to bright steel products in the drawn, turned or ground condition delivered in straight lengths. It does not cover cold rolled products and cut lengths produced from strip or sheet by cutting.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    13 pages
    German language
    sale 10% off
    e-Library read for
    1 day