SIST EN 13445-2:2009/A2:2012

Unfired pressure vessels - Part 2: Materials

This Part of this European Standard specifies the requirements for materials (including clad materials) for unfired pressure vessels and supports which are covered by EN 13445-1:2009 and manufactured from metallic materials; it is currently limited to steels with sufficient ductility but it is, for components operating in the creep range, also limited to sufficiently creep ductile materials . It specifies the requirements for the selection, inspection, testing and marking of metallic materials for the fabrication of unfired pressure vessels.

Unbefeuerte Druckbehälter - Teil 2: Werkstoffe

Recipients sous pression non soumis à la flamme - Partie 2: Matériaux

Neogrevane tlačne posode - 2. del: Materiali - Dopolnilo A2

Ta del tega evropskega standarda določa zahteve za materiale (vključno z materiali za prevleke) za neogrevane tlačne posode in nosilce, ki jih zajema standard EN 13445-1:2009 in so proizvedeni iz kovinskih materialov; trenutno je omejen na jeklo ustrezne duktilnosti, za sestavne dele v razponu tečenja pa je omejen tudi na duktilne materialne z ustreznim tečenjem. Določa zahteve za izbiranje, pregled, preskušanje in označevanje kovinskih materialov za izdelavo neogrevane tlačne posode.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 31-Mar-2011
• Publication Date: 27-Sep-2012
• Withdrawal Date: 29-Sep-2014
• ICS: 23.020.32 - Pressure vessels
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 25-Sep-2014
• Due Date: 18-Oct-2014
• Completion Date: 30-Sep-2014
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 13445-2:2009/A2:2012 - Unfired pressure vessels - Part 2: Materials

Relations

• Amends: SIST EN 13445-2:2009 - Unfired pressure vessels - Part 2: Materials
• Effective Date: 01-Oct-2012
• Replaced By: SIST EN 13445-2:2014 - Unfired pressure vessels - Part 2: Materials
• Effective Date: 01-Nov-2014
• Amends: SIST EN 13445-2:2009 - Unfired pressure vessels - Part 2: Materials
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13445-2:2009/A2:2012
01-oktober-2012
1HRJUHYDQHWODþQHSRVRGHGHO0DWHULDOL'RSROQLOR$
Unfired pressure vessels - Part 2: Materials
Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
Recipients sous pression non soumis à la flamme - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13445-2:2009/A2:2012
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-2:2009/A2:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-2:2009/A2:2012

---------------------- Page: 2 ----------------------

SIST EN 13445-2:2009/A2:2012


EUROPEAN STANDARD
EN 13445-2:2009/A2

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2012
ICS 23.020.30
English Version
Unfired pressure vessels - Part 2: Materials
Récipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
2: Matériaux
This amendment A2 modifies the European Standard EN 13445-2:2009; it was approved by CEN on 10 May 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-2:2009/A2:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13445-2:2009/A2:2012
EN 13445-2:2009/A2:2012 (E)
Contents Page
Foreword .3
1 Modification 1 .
...

SLOVENSKI STANDARD
SIST EN 13445-2:2009/oprA2:2011
01-marec-2011
1HRJUHYDQHWODþQHSRVRGHGHO0DWHULDOL'RSROQLOR$
Unfired pressure vessels - Part 2: Materials
Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
Recipients sous pression non soumis à la flamme - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13445-2:2009/prA2
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-2:2009/oprA2:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-2:2009/oprA2:2011

---------------------- Page: 2 ----------------------

SIST EN 13445-2:2009/oprA2:2011


EUROPEAN STANDARD
DRAFT
EN 13445-2:2009
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
November 2010
ICS 23.020.30
English Version
Unfired pressure vessels - Part 2: Materials
Recipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
2: Matériaux
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 54.

This draft amendment A2, if approved, will modify the European Standard EN 13445-2:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Warning : This document is not a European S
...